Pairing infrared attenuation with solid neutral density, the 138mm round Water White Glass IRND Filter from Tiffen is a versatile solution to reduce exposure values and achieve neutral color. The neutral density portion of the filter offers a 5-stop exposure reduction for working with longer shutter speeds or wider aperture settings. The infrared portion attenuates infrared wavelengths above 700nm to benefit working with CCD and CMOS sensors under difficult lighting conditions where infrared pollution can affect color balance. This infrared design also works proportionately to the density value, allowing you to achieve comparably neutral results from density to density in varying lighting conditions. The filter is constructed from Water White optical glass and utilizes Tiffen ColorCore technology for maintained clarity and quality. It measures 138mm in diameter and is suitable for use in select matte boxes and sunshades.

1.5 Optical Density    Water White ColorCore Glass Construction    Attenuates IR Wavelengths above 700nm    Darkens Entire Image    Allows Reduced Shutter Speed    Allows Wider Aperture

Alleviating the need to use multiple filters at once, this filter combines two distinct effects to reduce the number of filter surfaces in use.

IRND 1.5 filter offers a 5-stop exposure reduction to permit working with longer shutter speeds or wider aperture settings than normally required.

Infrared attenuating design eliminates infrared bleed above 700nm, is proportionate to the neutral density value, and helps to ensure clean, accurate colors and true blacks.

Constructed from ColorCore technology Water White optical glass for maintained image quality.

Measures 138mm in diameter and is suited for use with select matte boxes and sunshades.

Related Questions and Answers

Q: 1. Can this trigger work with a BM 6k Pro?

A: No, a compatible control cable is not offered for the Tilta Wooden Handle with Control Trigger to communicate with the Blackmagic Design Pocket Cinema Camera 6K Pro (Canon EF).

Q: 2. Can you power AND stream via USB? Or dummy battery needed?

A: If you are streaming with the Canon EOS R50 Mirrorless Camera with 18-45mm Lens (Black) using the USB-C connection you can not power it from that. And you need for continuous power use a dummy battery setup.

Q: 3. Does the R50's multi function shoe support use of the TASCAM CA-XLR2d-C XLR Microphone Adapter Kit?

A: Yes the TASCAM CA-XLR2d-C XLR Microphone Adapter kit is compatible with the Multi Function Shoe on the Canon Eos R50 camera.

Q: 4. Does it have a headphone input? if no, how can I monitor the audio?

A: No, the Canon R50 does not offer any headphone jack.

Q: 5. Is there a matching left-side handle?

A: There is only a right side in this series of side handles from Tilta.

Q: 6. Could this trigger work with a Canon 5D mk3 and/or Canon 5D mk4? If yes, what adapter cable is necessary? Thank you

A: We're afraid not. This is not compatible with the 5D Mark III or IV. Tilta does not offer a cable for it either.

Q: 7. Does the work for Black Magic Pocket Cinema Camera 4K

A: We're afraid not. The Pocket Cinema Camera 4K does not have a connection for a remote such as this.

Q: 8. Is it normal to hear sounds from the camera lens part when you open it?

A: I am not sure which lens you are referring to but if it is the Canon RF-S 18-45mm f/4.5-6.3 IS STM Lens it does make noise when focusing.

Q: 9. Will this connector trigger the Fuji X-H1 body?

A: it will but unfortunately at the moment there isn't a run stop cable specifically for the Fuji cameras. I believe that the Fuji camera may share a run stop protocol with the Panasonic Lumix cameras and if that is the case the GH5 cable would work

Q: 10. is it work bmpcc?

A: Sorry Shopper, the hand grip will not work with a BMPCC.