The desert tan iSeries AR and Short Rifle Case from SKB features a foam interior with convoluted foam in the lid for cushioning and securely positioning your AR or short rifle. The case is constructed of polypropylene copolymer resin and is waterproof, gasketed, dustproof, and (IP67) submersible. The case is also resistant to corrosion and impact damage.

Four trigger latches, four reinforced padlock locations for separately sold locks and molded-in hinges with stainless steel hinge pins all add to the secure design of this case. A built-in automatic ambient pressure equalization valve (MIL-STD-648C) allows for safe air travel. Three comfortable rubber over-molded cushion grip handles snap into vertical/horizontal place for convenient carrying options. The case can also be pulled on recessed in-line skate style wheels for easy transport. The case can also be securely stacked for reliable storage.

Perfect for short tactical rifles

Trigger release latch system

Molded-in hinges for added protection

Padlock holes include stainless steel padlock protector clips

Trigger release latches can be retrofitted with TSA accepted latches with key locks

Rubber over-molded cushion grip handle which snaps into vertical/horizontal position

Cushion grip handles on three sides for comfortable lifting and carrying

In-line skate style wheels for easy transport

Waterproof and dust tight design (MIL-C-4150J)

Ambient pressure equalization valve (MIL-STD-648C)

Resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F)

Resistant to impact damage (MIL-STD-810F)

Made in the U.S.A.

Related Questions and Answers

Q: 1. I wanted to know if the length of the Zeiss CP.3 100mm and 135mm fit in to this case. I know that the diameter will fit and it won't be a snuggle fit. But what about the length.?

A: Each lens slot has a base depth of 120mm. The useable lid depth is 35mm and yields a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm to accommodate shorter lenses. The Zeiss CP.3 100mm and 135mm's lengths are 126.5mm. So yes, the case is deep enough these lenses. Please read the overview section for these details.

Q: 2. How dense and durable is the foam insert for the SKB 3I-20118LENS case? Will it holds its shape over time?

A: Hi David, Thank you for your interest in our cases. The foam uses a fine-cell formulation and is dense. The specific type of foam used in the base of the case is called Synergy 1000. It will hold up for 20 years or longer. It will hold it's shape over time without issue unless you put an item in with a lot of pressure in the pocket and then it will open up the pocket a little. You're welcome to contact our customer service department if you would like a technical sheet on the foam breakdown.Thank you,Will

Q: 3. Would this case work for the Sony Cine Alta 4K Primes?

A: Yes, you can fit all the Sony Cine Alta 4K primes within the case but the 135mm is looking to make it a tight fit. The length of the lenses is as follows - 20/25 mm: 137 mm (5 1/2 inches), 35/50/85 mm: 135.5 mm (5 3/8 inches), 135 mm: 160 mm (6 3/8 inches). The external diameter of the Sony lenses is 118 mm (4 3/4 inches). This SKB case has for its lens slots a diameter of 125mm and a base depth of 120mm. The useable lid depth is 35mm yield a maximum length of 155mm per lens.

Q: 4. Will this fit the PL mount Sumire primes from Canon?

A: Yes, the SKB iSeries Watertight Lens Case can house the Canon Sumire Prime Lenses. The case can fit lenses that are up to 125mm in diameter and a base depth of 120mm. The Canon Sumire Prime Lenses fit these requirements.

Q: 5. Anyone use this case with the Rokinon Cine DS Lenses? Especially the 135mm?

A: I have the Rokinon Cine DS lenses up thru 85mm and they fit great in this case. I also have the Canon 24-70 which measures almost 5.5 inches long with the caps on, and it fits fine, too. I would not go much longer than that. You might get away with 6 to 6.5 inches long but it would be tight.

Q: 6. Will it fit the Zeiss CP.3 135 and 100mm cine lenses?

A: SKB iSeries Watertight Lens Case is made for Cine lenses with an outer diameter of 125mm. Zeiss CP.3 XD 135mm T2.1 and 100mm T2.1 Compact Prime have a smaller outer diameter, therefore the lens won't be safely snuggle in the precut foam. I would recommend getting the case with a customizable cube foam.

Q: 7. How well does thius fit the Mackie DL-1608? Looks like it will work fine...

A: The case has Custom-cut PE foam to fit the QSC TouchMix-8. It has a removable foam section to fit the TouchMix-16. I would advise getting a case that was designed for the Mackie as well.

Q: 8. Do the Rokinon Xeen fit?

A: Xeen's fit, but not well. The 16mm is a good fit, but the other lenses are taller than the holes, so about an inch of the lens hangs out. The case can still close, but it's tight. I bought this case specifically for my Xeen's and will be returning it because it's not a correct fit.

Q: 9. What are the dimension?

A: The inside dimensions are 12x9-3/8x4 deep Inside I have my Nikon D7100 with a 18-200 lens and shoulder strap attached. I have another lens 18-105My battery charger2 spare batteries Remote control Spare memory cards There is room for a few more smaller itemsI took this case down 240 miles of the Grand Canyon for 8 days in 2016. It was amazing. Everything stayed dry and was in tact.

Q: 10. Will this fit the canon CN-E 24, 50, and 85mm lenses?

A: Yes, this iSeries Watertight Lens Case will fit the Canon CN-I 24, 50 and 85mm lenses.