The black iSeries Double Rifle Case from SKB features a fabric lined interior with molded EPS in the base and lid for structural strength and to separate the two rifles. Strategically placed foam pads in the bottom and lid of the case provide additional cushioning and prevent rifle movement during transport.

The injection molded iSeries Double Rifle Case is constructed from polypropylene copolymer resin and is gasketed, waterproof, dustproof and (IP67) submersible. The case is also resistant to corrosion and impact damage. There are molded-in hinges, stainless steel hinge pins and four trigger release latches for reliability. Four reinforced padlock locations accommodate separately sold locks for additional security. Three rubber over-molded cushion grip handles which snap into vertical/horizontal position and in-line skate style wheels provide convenient and easy transport options. An automatic ambient pressure equalization valve (MIL-STD-648C) allows for safe air travel. This case can securely stack for reliable storage.

Bunk-bed storage system with rigid foam dividers

Trigger release latch system

Padlock holes include stainless steel padlock protector clips

Molded-in hinge for added protection

Trigger release latches can be retrofitted with TSA accepted latches and key locks

Rubber over-molded cushion grip handles which snap into vertical/horizontal position

Cushion grip handles on three sides for comfortable lifting and carrying

In-line skate style wheels for easy transport

Waterproof and dust tight design (MIL-C-4150J)

Ambient pressure equalization valve (MIL-STD-648C)

Resistant to UV, solvents, corrosion, and fungus (MIL-STD-810F)

Resistant to impact damage (MIL-STD-810F)

Made in the U.S.A.

Related Questions and Answers

Q: 1. How much room does the think tank liner take up? Would the Matthews Dutti Dolly fit?

A: This has interior dimensions of 24.1 x 21 x 7". The Dutti Dolly is 20 x 24 x 3.5" / 50.8 x 60.96 x 8.89 cm (To Top of Wheel Guards). It will be a tight fit, but it should work.

Q: 2. How dense and durable is the foam insert for the SKB 3I-20118LENS case? Will it holds its shape over time?

A: Hi David, Thank you for your interest in our cases. The foam uses a fine-cell formulation and is dense. The specific type of foam used in the base of the case is called Synergy 1000. It will hold up for 20 years or longer. It will hold it's shape over time without issue unless you put an item in with a lot of pressure in the pocket and then it will open up the pocket a little. You're welcome to contact our customer service department if you would like a technical sheet on the foam breakdown.Thank you,Will

Q: 3. Maximum Length on Tokina Vista EF are 14.5cm / 145mm. I've been told they won't fit but it appears that they fit the specs. Has anyone used these for either the ATX or Vistas?

A: No this will Not support the tokina Vista primes. you'll need a case made to accommodate the depth and width of those lenses

Q: 4. Anyone use this case with the Rokinon Cine DS Lenses? Especially the 135mm?

A: I have the Rokinon Cine DS lenses up thru 85mm and they fit great in this case. I also have the Canon 24-70 which measures almost 5.5 inches long with the caps on, and it fits fine, too. I would not go much longer than that. You might get away with 6 to 6.5 inches long but it would be tight.

Q: 5. Will this fit the canon CN-E 24, 50, and 85mm lenses?

A: Yes, this iSeries Watertight Lens Case will fit the Canon CN-I 24, 50 and 85mm lenses.

Q: 6. Do the Rokinon Xeen fit?

A: Xeen's fit, but not well. The 16mm is a good fit, but the other lenses are taller than the holes, so about an inch of the lens hangs out. The case can still close, but it's tight. I bought this case specifically for my Xeen's and will be returning it because it's not a correct fit.

Q: 7. Will it fit the Zeiss CP.3 135 and 100mm cine lenses?

A: SKB iSeries Watertight Lens Case is made for Cine lenses with an outer diameter of 125mm. Zeiss CP.3 XD 135mm T2.1 and 100mm T2.1 Compact Prime have a smaller outer diameter, therefore the lens won't be safely snuggle in the precut foam. I would recommend getting the case with a customizable cube foam.

Q: 8. Would the Tokina Cinema Vistas fit in this case?

A: No, the Tokina Cinema Vistas exceed the maximum length of 155mm per lens slot.

Q: 9. Do you have a hard case for lenses of 95mm diameter? Thank you

A: We do not have any lens cases taht specifically say that they accommodate 95mm diameter lenses. This fits lenses up to 125mm in diameter. if you have lenses that are 95mm they will fit. If you want a case with a more snug fit then you may want to check if there are customized case solutions for your particular lens set.

Q: 10. What size risers can fit in the cutouts for the recurve risers?

A: The SKB iSeries Double Recurve Bow Case can accommodate 2 risers up to 25” long.