HP TIJ 1.0 Print Cartridge (Black) is part of the original line of thermal inkjet print cartridges and provides a low cost solution for a broad range of printing applications. Each disposable print cartridge includes a printhead with a self-contained ink reservoir for fast and easy replacement. Non-contact printing at 96 dpi enables printing on irregular surfaces at variable distances, with print quality consistent over the life of the print cartridge.

The Black Inkjet Print Cartridge is compatible with the HP Thinkjet, Quietjet, Paintjet and Deskjet Series printers.

12 nozzles for 96 dpi resolution and a 1/8" swath width

Easy, low-cost pen health maintenance system (no wipers or capping needed)

Related Questions and Answers

Q: 1. I see contacts on the lens mount. Does this lens transfer data to the camera?

A: Yes this lens will transfer EXIF data.

Q: 2. Is this 6-bit coded? If not how is lens selection accomplished?

A: It is not 6-bit coded. However, if you have a Leica M9, you can select the closest lens from the Menu - Lens Detect- 35/F2 11310/11311=Set and exitIf an M8 you will need to understand the focus frame in the camera works and shoot accordingly.

Q: 3. Will the Nikon Focus Peeking work with this lens?

A: Peaking mode on a camera usualy does not have an effect in terms of the lens. So peaking shoudl work using the Voigtlander Nokton 50mm f/1.0 Aspherical Lens (Nikon Z) .

Q: 4. Does this lens have protection against internal water or dust accumulation?

A: The Voigtlander Nokton 50mm f/1.0 Aspherical Lens (Nikon Z) doesn't have a rubber grommet at the mount, and it doesn't have weather sealing.

Q: 5. Assume this has a clicked aperture ring, as opposed to smooth and unclicked for video, correct?

A: The TTArtisan 35mm f/1.4 Lens for FUJIFILM X does have a clickable aperture ring.

Q: 6. Is this lens optically the same between Leica M and Nikon Z mounts?

A: Yes, the Nokton 50mm f/1.0 is optically the same between both Nikon Z and Leica M.

Q: 7. Does this lens work on Leica CL with firmware 4.0?

A: The TTArtisan 35mm F1.4 APS-C Lens for L Mount Camera is a fully manual lens with no electronic contacts for communication with the camera. No specific firmware is required for the lens usage, so it may be used with any Leica L-mount camera with any firmware installed. You would have to focus the lens manually and set the aperture manually using the aperture dial built onto the camera.

Q: 8. Is this lens compatable with fujifilm xpro-1?

A: Yes TTArtisan 35mm f/1.4 Lens for FUJIFILM X (Black) is compatible with the Fuji XPro 1.

Q: 9. Does the aperture ring have 1/3 stops or are there only full stops?

A: The Voigtlander Nokton 50mm f/1.0 Aspherical GA Lens for Sony E has an aperture ring is selective for either 1/3 click stops or clickless aperture.

Q: 10. Can a filter be used when the hood is attached? Does the filter go behind or in front of the hood if so?

A: You could use filters and the hood at the same time on the TTArtisan 35mm f/1.4 Lens for Leica M (Silver).