The Dalite 50 x 80" Model C Manual Front Projection Screen is a perfect choice for either a large lecture or seminar hall, or conference/training room. The screen is designed for heavy use and features lubricated steel ball bearings for a smooth operating system. The screen is accessed via a pull cord.

The CSR mechanism was designed to provide a smooth and safe way for the screen to be retracted into its case. This kind of consistent operation ensures a longer life for the screen. Screens with CSR must be fully extended since there are no intermediate stopping positions.

As an option, you can purchase the screen in any one of seven veneer finishes to give it a more professional, finished appearance. If you prefer not to choose a veneer or laminate, the screen will come with a white casing. In addition, you can also purchase floating brackets which allow the screen to be either wall or ceiling mounted but which also give you the freedom to align the system left/right.

Wall or Ceiling Mounted / Non-Tensioned    94" Diagonal / WideScreen Format    1.85:1 Aspect Ratio    Matte White Finish / Front Projection

Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications

Optional floating mounting brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Matte White fabric up to and including 10' high will be seamless

Glass Beaded fabric up to and including 8' high will be seamless

Video Spectra 1.5, High Contrast Matte White and Silver Matte fabrics available in sizes up to 8' high

Related Questions and Answers

Q: 1. Does flash come with a front reflector? Or just bare bulb as shown?

A: Unfortunately, a reflector is not included with the Godox AD600BM Witstro Monolight. The following items are listed under the In The Box section under the Overview on our website as included with the monolight purchase:In the BoxGodox AD600BM Witstro Manual All-In-One Outdoor FlashWitstro WB87 Battery PackCharger and CablePlastic Protective CoverLimited 1-Year B&H WarrantyIf you need a reflector, I would recommend the Godox Standard Reflector (7 ), B&H # GOADR6, as a basic economically-priced reflector for your usage needs.

Q: 2. Can i use it in the a7s2? And what trigger am i going to need??

A: You can use the Sony version of the Godox X1, X2 or XPRo.

Q: 3. What kind of hard case would work best to carry this light?

A: A Pelican 1510 should be adequate for carrying this strobe. Since you asked about a hard case I'm guessing that you're going to rugged terrain for photoshoots.

Q: 4. Can I change the light output from the triggering device or do I need to walk over to it to change it?

A: If you are using the correct flash trigger with the Godox AD600BM Witstro Monolight you will be able to change the power on the flash from the trigger. These are the compatible triggers, https://bhpho.to/3Qk0K3R.

Q: 5. Can i use pocket wizards to trigger the flash?

A: As the Godox AD600BM Witstro Manual All-In-One Outdoor Flash has a 1/8" (3.5 mm) sync port on the bottom of the light fixture, yes, you may connect a PocketWizard transceiver to the light fixture via a PocketWizard MM1 Miniphone to Miniphone Cable -12", B&H # POCMM16. However, do note you will only have manual control and will need to set the output on the light fixture itself. You would not be able to adjust the output wirelessly using a PocketWizard remote.

Q: 6. How much more power / light does this output vs Godox TT600? thank you!

A: The following unit has 3x times the power of a dedicated flash unit.

Q: 7. Is there any adapter to be able to use Profoto mount accessories with this ? (I see one for the new 400Pro, but can’t find any for this)

A: There are no adapters to go from Bowens to Profoto.

Q: 8. What is the difference between Godox flashes AD600BM, AD600B and AD600Pro??

A: The AD600B is the older TTL flash, the AD600BM is manual only. The Ad600Pro is the new TTL and HSS capable version with more color accuracy and faster recycle.

Q: 9. I shoot with a canon 5d Mark III. What type of trigger would I need for the Godox ad600 bm?

A: You will want a XPro C https://bhpho.to/2XKkfIO.

Q: 10. Does this flash come with any kind of case?

A: While a case is not included, the Godox Carrying Bag for AD600PRO Kit, B&H # GOCB12 is compatible. https://bhpho.to/2Zl12uB