The Dalite 87 x 139" Model C Manual Front Projection Screen is a perfect choice for either a large lecture or seminar hall, or conference/training room. The screen is designed for heavy use and features lubricated steel ball bearings for a smooth operating system. The screen is accessed via a pull cord.

As an option, you can purchase the screen in any one of seven veneer finishes to give it a more professional, finished appearance. If you prefer not to choose a veneer or laminate, the screen will come with a white casing. In addition, you can also purchase floating brackets which allow the screen to be either wall or ceiling mounted but which also give you the freedom to align the system left/right.

Wall or Ceiling Mounted / Non-Tensioned    164" Diagonal / WideScreen Format    1.85:1 Aspect Ratio    Matte White HC Finish / Front Projection

Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications

Optional floating mounting brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Matte White fabric up to and including 10' high will be seamless

Glass Beaded fabric up to and including 8' high will be seamless

Video Spectra 1.5, High Contrast Matte White and Silver Matte fabrics available in sizes up to 8' high

Related Questions and Answers

Q: 1. does this come come with a bulb protector ?

A: Yes, all strobes come with protective strobe caps.

Q: 2. I shoot with a canon 5d Mark III. What type of trigger would I need for the Godox ad600 bm?

A: You will want a XPro C https://bhpho.to/2XKkfIO.

Q: 3. This Godox AD600BM Witstro comes equipped with a Bowens mount. Is there a Godox mount for use with this Godox AD600BM?

A: No, the Godox AD600BM Witstro Manual All-In-One Outdoor Flash only uses modifiers with a Bowens mount.

Q: 4. Can the flash be fired using HSS while it is being fired as an optical slave?

A: HSS requires a radio trigger for the timing signals. Optical must stay under sync speed.

Q: 5. Will a Westcott Switch box fit this strobe?

A: As long as you use the Switch Bowens adapter https://bhpho.to/2vyTVRR.

Q: 6. What is the best hexagon soft box and adapter for this light. Something economical

A: Unfortunately, we do not offer a hexagon softbox to fit this particular monolight. We do have an octagonal option such as the Godox Octa Softbox with Bowens Speed Ring (55 ) B&H # GOSBNBOCT140.

Q: 7. Can I change the light output from the triggering device or do I need to walk over to it to change it?

A: If you are using the correct flash trigger with the Godox AD600BM Witstro Monolight you will be able to change the power on the flash from the trigger. These are the compatible triggers, https://bhpho.to/3Qk0K3R.

Q: 8. Can i use pocket wizards to trigger the flash?

A: As the Godox AD600BM Witstro Manual All-In-One Outdoor Flash has a 1/8" (3.5 mm) sync port on the bottom of the light fixture, yes, you may connect a PocketWizard transceiver to the light fixture via a PocketWizard MM1 Miniphone to Miniphone Cable -12", B&H # POCMM16. However, do note you will only have manual control and will need to set the output on the light fixture itself. You would not be able to adjust the output wirelessly using a PocketWizard remote.

Q: 9. Does the hss work with a Sony a7rii and xpro s?

A: Yes, this would work in HSS on the A7RII with the XPRO transmitter. Please reach out to our live video-chat department if you run into any issues and we can troubleshoot this with you. :)

Q: 10. What kind of hard case would work best to carry this light?

A: A Pelican 1510 should be adequate for carrying this strobe. Since you asked about a hard case I'm guessing that you're going to rugged terrain for photoshoots.