The Rycote INV-3 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The entire mount is comprised of two low-profile InVision lyres with a 20mm (0.78") clip at the front and rear. The lyres rest on a bar with a 3/8" threaded stand adapter at the base.

The stand adapter itself features an integrated cable clip for securing excess cable and minimizing noise. The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

The InVision suspension system is available in various clip sizes to accommodate different microphones. The dual 20mm mounting clips included with this system are intended for mounting microphones such as the DPA4021, Neumann KM100/180 Series, Sennheiser MKH8000 (with XLR module).

For Static Stand Mount Application    Small Low-Profile Lyre Size    Two 20mm Mounting Clips    3/8" Threaded Stand Mount    Standard Support Bar Length

The small InVision lyre suspension webs measure 42mm high and 40mm wide. The small, low-profile design is ideal in broadcasts, recording applications, etc.

The 20mm mounting clips included with this system are intended for mounting microphones such as the DPA4021, Neumann KM100/180 Series, Sennheiser MKH8000 (with XLR module).

The unique lyre suspension is engineered with Hytrel for a virtually indestructible design that maximizes shock and noise suppression.

A 3/8" threaded stand adapter is featured at the base for microphone stand mounting.

Related Questions and Answers

Q: 1. Is it possible to use with Sony - FX9 and FX6?

A: Yes, the Rycote 037324 will moun on the SONY FX9 and FX6 camcorders.

Q: 2. Will the bottom of the handle mount onto a boom pole and/or a hot shoe adaptor?

A: The included handle features a 3/8' threading compatible with a boom pole. Using the included shoe adapter also mountable to a camera.

Q: 3. Is there a way to permanently turn off the warning sound?

A: Yes you can turn off the so sound on the Profoto A10. Page 32-33 in the manual. https://bhpho.to/3xeQAHp

Q: 4. Will the Godox X-Pro II trigger these?

A: Yes, the Godox XPro II TTL Wireless Flash Trigger will work with the Godox SK300II-V Studio Flash Monolight. Simply match up the channel and group to sync the flash trigger to the light unit.

Q: 5. Specs description mentions 4M/E is that right??

A: The Blackmagic Design ATEM Television Studio 4K8 is a 1 M/E switcher.

Q: 6. Are the 8 SDI Outputs all programmable? such as can I select what source each SDI out is sending similar to an AUX?

A: The Blackmagic Design ATEM Television Studio 4K8 has 12 total SDI outputs. 10 outputs are AUX outputs, which the output can be selected in the Blackmagic ATEM software. The switcher also has an SDI Program output and an SDI Multiview output as well.

Q: 7. Would I also be able to use these straps to attach my camera to my backpack when I'm not carrying my tripod?

A: Yes, you can attach your camera strap to this carabiner and attach to your backpack.

Q: 8. Will this mount to a Canon XA40?

A: Yes it will.

Q: 9. Could you use this to attach the Zoom H1 and insert into the camera clamp designed for a shotgun mic?

A: Not without modification. Also, the CCA is designed to fit the Softie bracket, which has a Metric M6 bolt, whereas the Zoom H1 thread is 1/4 20.

Q: 10. Is it possible to purchase just the shock mount? I don't need the hsndle or windscreen.

A: Yes it is possible to purchase just the Lyre shock mount. You will find it on the B and H website with this part number B&H # RY41119.