The signature blue with black trim CS-DV3U Mini-DV Camera Case from Porta Brace is a 1000-denier waterproofed Cordura nylon case with 1" thick interior foam padding. It has a quick access main compartment with a CR Universal adjustable camera cradle that holds the camcorder securely in place on the bottom of the case. The case is designed to carry and protect various Mini DV camcorders up to approximately 17" long, plus accessories.

The CS-DV3 case has a small removable padded pouch, a large exterior pocket that holds a rain cover and cables, and a wide slip pocket for a white balance card, owner's manual, maps, airline tickets, and more. A white balance card is included. Carry the case with the two suede-covered hand grips or the removable adjustable shoulder strap with suede-covered pad.

This Porta Brace case is manufactured in Vermont, USA.

For Sony PDR-150, PDR-170 Camcorders    1000D Waterproofed Cordura Nylon    1.0" Thick Interior Foam Padding    Main Compartment with Cradle    Removable, Small Padded Pouch    Large Exterior Pocket    Wide Slip Pocket    Suede Leather-covered Hand Grips    Removable Shoulder Strap    Made in Vermont, USA

• 1000-denier waterproofed Cordura nylon
• 1" thick foam padding
• Bottom panel is reinforced with 8mm hollow core plastic
• Slip Not fabric adds an extra layer of protection against water, dirt, and grime with an easy wipe-off surface
• Non-skid bottom panel

Quick access main compartment has a CR Universal adjustable camera cradle

• Small removable padded pouch
• One large exterior pocket holds a rain cover (optional), cables etc
• Wide slip pocket for white balance card, owner's manual, maps, airline tickets, etc.

White balance card is included

• Suede-covered hand grips
• Removable adjustable shoulder strap with suede-covered pad
• "D" rings attach shoulder strap

• Canon GL-1, GL-2, XH-A1, XH-G1, XM-1, XM-2 camcorders
• JVC GY-DV300 camcorder
• Panasonic AG-DVC80, AG-DVC80H camcorders
• Panasonic AG-DVX100, AG-DVX100A, AG-DVX100P, AG-DVX102B camcorders
• Panasonic AG-HVX200, AG-HVX200A, AG-HVX202 camcorders
• Sony DCR-VX1000, DCR-VX2000, DCR-VX2100 camcorders
• Sony DSR-PD150, DSR-PD170 camcorders
• Sony HDR-FX1, HDR-FX7 camcorders
• Sony HVR-V1U, HVR-Z1U, HVR-Z7U camcorders
• Sony PMW-EX1 camcorder
• Similar sized camcorders

Related Questions and Answers

Q: 1. How large is the bag included with the combo and pro kit? They call it a backpack, but it looks like it's not much bigger than the gimbal.

A: Bag specifications are not specifically defined and the image shown may not necessarily be in the correct proportions, but the product is designed to allow for all included hardware to be adequately stored.

Q: 2. Does this also work with the new Crane 3M-S?

A: The Falcam F38 Quick Release Bundle for Zhiyun-Tech CRANE-M3 Gimbal Stabilizer will support the following Zhiyun Gimbal models. Works with the following models: Zhiyun Crane M3/M3S/M2S

Q: 3. Will this hold Sony a7r4 with Tamron 17-28 in vertical orientation?

A: The Sony a7R IV Mirrorless Camera with the Tamron 17-28mm f/2.8 Di III RXD Lens for Sony E is approaching the edge of the Zhiyun CRANE-M3 3-Axis Handheld Gimbal Stabilizer (Standard Kit) 2.48 lb payload capacity as well as providing a longer length than with tested lenses. There is a good chance you will have balancing issues.

Q: 4. Will this work with Sony a7iv with the 28-70 lens kit? Will this work like selfie stick?

A: No. The following lens will cause the unit to be top heavy and will not balance correctly.

Q: 5. Sony FX3 paired with the 24-105 lens. Will it hold???

A: No it will not. The FX3 with the 24-105mm lens is both too large and too heavy for the Zhiyun-Tech CRANE-M3 3-Axis Handheld Gimbal Stabilizer (Combo Kit)

Q: 6. Will this work with the Canon R5 and the EF 11-24 L lens?

A: No, The Zhiyun CRANE-M3 3-Axis Handheld Gimbal Stabilizer would not support a camera with the Canon EF 11-24mm f/4L USM Lens. Zhiyun only recommends using a RF50mm F1.8 STM with the Canon R5, due to weight and size limitations.

Q: 7. What size phones does this hold (vertical/horizontal)?

A: It would depend on the accessory mount you attach to the Zhiyun CRANE-M3 3-Axis Handheld Gimbal Stabilizer. There are adapters like the Magnus STA-150B Smartphone Tripod Adapter with Screw Clamp (B&H # MASTA150B), which supports devices from 2.3 to 4.1" wide.

Q: 8. Is it compatible with the Canon M50?

A: Yes, the Canon M50 is compatible with the Zhiyun-Tech Crane M3 Gimbal.

Q: 9. When used with iPhone 14 will it support Filmic v7?

A: The Zhiyun CRANE-M3 3-Axis Handheld Gimbal Stabilizer (Standard Kit) (B&H# ZHCRANEM3) allows the camera to be controlled only using the ZY Play App. See below: https://apple.co/3wko3z9

Q: 10. if it works with nikon d780?

A: No this gimbal is not compatible with a Nikon D780.