The Cavision SWJ821 Slide-On Windcover offers optimum wind protection without the need for a basket or blimp-type windshield and wind-muff. Artificial rabbit fur significantly diffuses high-wind noise and an inner foam lining works as a windscreen for an extra layer of protection against wind noise. The slide-on design features an 0.82" (21mm) inner diameter and is intended for microphones measuring 8" (203.2mm) in length. The small and lightweight windcover is an excellent solution for field recording with shotgun microphones, stereo microphones, etc.

Measures 8" (203.2mm) Long    Foam Inner Lining    0.82" (21mm) Inside Diameter    Slide-On Design    Artificial Rabbit Fur    Dark Grey

Related Questions and Answers

Q: 1. Will this fit a Z 50mm lens?

A: Depends on 50mm lens used. I would suggest using the following for a good shooting experience Nikon 55mm f/2.8 Micro-Nikon lens and PK-13 Extension Tube.

Q: 2. I have and old 100 mm canon macro with a 52mm thread and 1/1 magnification. With a full frame camera could I use the Nikon ES-1 Slide Copying Adapter?

A: While you could attach the ES-1 to other lenses besides the Nikon lenses that are recommended for it, you may need to add extension tubes to the lens in order to focus. One such option for extension tubes is the Vello Auto Extension Tube Set for Canon EOS B&H # VEEXTCD.

Q: 3. I would like to use the ES-1 on a Nikon D800. What would be the best micro lens to use? Would I need adaptors also?

A: Officially the 55mm macro and extension tube were the correct items to use with this adapter, but the 60mm macro will also work without a tube.

Q: 4. Will this work with Sony FE 2.8/50 macro lens?

A: It is possible to use a Sony FE 50mm f/2.8 Macro Lens with the Nikon ES-1. However, you may need to use extension tubes to allow for the proper focus.

Q: 5. Finally got my ES-1 to use with my 55micro 3.5 and M2 extension (27.5mm same as a PK 13) , but it looks like I need maybe another 5 or 6 mm to get the slide in focus. I thought the ES-1 was made to work with this combination. Any one have any ideas why it's not working?

A: This adapter is met to be used with 55mm f/2.8 try staking the extension tube. Nikon 8mm AI Extension Tube PK-11A

Q: 6. Has anyone done a direct comparison of results using an ES-1 with scanning on a Nikon Coolscan 4000?

A: I love it with my D7200. Have not used a coolscan V but have scanned with a conventional scanner. I used a light on light stand behind it and it went incredibly fast and the resolution with a D7200 was phenomenal.

Q: 7. Apologies if this is already asked and answered - I could not find the answer to the specifics of my setup. I have a Canon EOS Rebel t3i and a Canon EF-S 55-250mm 1:4-5.6 58mm lens. Would this product work for me and if so, with what modifications required? Thanks so much!

A: Google Scanning thousands of old slides? and select scanning thousands of old slides use a digital camera. You will need a macro lens and I don't know if your lens has macro capability at 55mm, The ES-1 has a 52mm thread so you would need a step down filter ring. I found the old Nikon K extension tube set on Ebay. A little research should answer the question about your Canon equipment. The bottom line on the product is that it has a little learning curve, white balance, alignment etc, but it does a great job.

Q: 8. Is this rail suitable for a 70-200 zoom lens?

A: the real works fine with a 70-200mm f/2.8

Q: 9. Is the rail suitable for a 70-300

A: Unfortunately no but this Sunwayfoto DMP-200R Multi-Purpose Rail Nodal Slide will work with most 70-300mm lenses: https://bhpho.to/483I1A7

Q: 10. What else do I need to use the Nikon ES-1 with a Sony A7ii camera? I do have a light source.

A: You will need Nikkor 55mm f/2.8 Micro-Nikkor lens and PK-13 Extension Tube and Nikon to Sony lens adapter