The 50 x 50" Portable Tripod Front Projection Screen from Elite is your basic floor standing screen that can be used for home, business, or educational use. This tripod has been designed to withstand daily use and has a heavy-duty casing. The pull-up design is enhanced by a standard keystone eliminator that helps keep your image square.

The screen deploys and retracts easily and features an advanced locking design to maintain its height at the desired elevation. Once in position, the finish has a functional 4-sided black masking border that helps keep your audience focused on the image and gives the screen a more professional appearance. Elite recommends this screen for DLP/LCD projectors.

Elite's MaxWhite finish is a multi-weave and textured surface with a 1.1 gain rating, 160° viewing angle, and uniform wide, even image diffusion. It has a black backing to prevent bleed-through from any rear light source and can be cleaned with mild soap and water. The finish is flame retardant and mildew resistant.

Floor Standing    Non-Tensioned    71" Diagonal    Square (Audio-Visual) Format    1:1 Aspect Ratio    Front Projection    MaxWhite Finish

Screen can be cleaned with mild soap and water

Produces a clear, bright image

Wide-screen angle makes it viewable from multiple locations in the room

Related Questions and Answers

Q: 1. Will this work with the Voigtlander 25mm f/0.95?

A: This works best with high f stops minimum f 4 it doesnt work with fast lenses

Q: 2. I would like to use this adapter with my Zeiss prime lenses, on a D810, with my 85mm and 100mm lenses. What is the best kind of step-down ring to use, since the thread sizes on my lenses are all larger than the recommended 58mm?

A: here's what can tell you...if the filter threads on your lens are larger than 62mm on a full frame sensor, it will vignette. i have a very special manual zoom lens that is so sharp, i don't really understand it. the threads are 72mm, and it vignettes so badly that in order to correct it the horizontal crop is almost 4:3. on super35, it's still no good. it is what it is. i really like this adapter. i have two (with the range finder-it's a must have). hope this helps.from their website, they suggest full frame sensors with 40-85mm lenses. in fact, for any sensor size, they recommend a max of 85mm. for fun, i put one on my old Canon XA10 and zoomed it to 200mm. it looked fine. i know it's a big purchase for most, so make sure you have lens specs that they suggest.

Q: 3. Does it work with a Sony a 7 III and the Zeiss Batis 40mm?

A: We're afraid not. The diameter of the Batis 40mm is too large to properly work with this adapter, you need a lens with a front diameter that is at 50mm or below. The SLR Magic Cine II 50mm f/1.1 Lens (Sony E-Mount), B&H # SL5011FE2, is a great choice for this Anamorphot Adapter and the A7III. https://bhpho.to/2CXd0lW

Q: 4. Is this compatible with the Sirui K-20x ball head? If not, do you know of anything that is? Thanks

A: Most arca type quick release systems should work with our tripod plates, so please let us know if this was a successful coupling for you!

Q: 5. Can i use this lens with a 16:9 projector to create cinemascope projection images? The schnider lenses for this specific use is so much expensive!

A: While we do not know of anyone doing this, we are of the opinion that since the numbers of 16:9 and 1.33x are in the correct relationship, excellent widescreen movie viewing will result.

Q: 6. I'm having a hard time removing the step-up ring, how do I unscrew it?

A: Get a pair of thick rubber gloves for the kitchen. It will give you the grip you need. I have had no issues with mine, but did it to a friend's lens that the ring was stuck and it came off fine.

Q: 7. What proportions would this lens yield on 2:3 full-frame sensor, such as the 5D MII?

A: 3.00:1 is our opinion.

Q: 8. What does the 50 in the name of this product mean?

A: I think it's a newer version of this anamorphic adapter. Before it was called 40.The one I got from here didn't have thumb screws to lock it. If I'm not wrong, you can now lock it

Q: 9. Will this work on my Sony X70 Camcorder (it has a 62mm Front thread)?

A: While you may be able to physically connect the Anamorphic Adapter to the PXW-X70, we are not sure how well it would actually work. That is something you would need to test out to see the results. This adapter is a Returnable Item at this time.

Q: 10. My set up is bmpcc 4k with Canon EF to BMPCC4K T Speed Booster® XL 0.64x, Which taking lenses does SLRA50-2x with rangefinder support ? for wide, medium, long shots.

A: You will be able to connect the SLR Magic HyperPrime 50mm T0.95 Lens with MFT Mount, BH #SL5095MFT, directly to the Pocket Cinema Camera 4K. It has the same mount as the camera and has the proper filter thread, lens diameter and focal length to work. https://bhpho.to/2qv8BS7