The pair of black Control 50S/T 8" Subwoofers from JBL are professional-quality subwoofers intended for use in commercial and small venue installation applications. Each subwoofer cabinet contains an 8" long-excursion driver with a high-mass cone and a 4-layer copper voice coil for extended low frequency response and high motor strength. The aluminum former provides excellent transient response, while a rubber half roll surround provides enhanced bass performance.

Each subwoofer has a power handling capability of 150W of continuous power. And each has a selectable 70/100V output for distributed lines and feature low impedance operation. Mounting brackets are included for attaching the subwoofers to a wall.

• Full bandwidth 32 Hz – 20 kHz high fidelity sound
• Selectable 70V/100V for distributed lines, or low impedance
• Versatility for either two or four satellite speakers per system
• Available in black or white

Related Questions and Answers

Q: 1. Remote for UX 90

A: This will not work with the Panasonic UX90. It is for camcorders that use the Sony EX remote system. Instead you would want to look at B&H # LIZCLP, which is the Libec ZC-LP LANC Zoom Control for Select Sony/Canon/Panasonic Cameras. https://bhpho.to/2zISEJX

Q: 2. Can I use it with the Canon 50-1000mm lens?

A: No this control is meant for inexpensive camcorders. It depends on your set up what is best. If used on a TV camera, most likely you would want this. Canon ZSD-300D Digital Zoom Servo Demand for Digital ENG/EFP Lenses B&H # CAZSD300D

Q: 3. Libec A12P 12-pin Adapter Cable

A: Yes, you can use the A-12P 12-pin Adapter Cable with the ZC-9PRO Zoom Control.

Q: 4. will this work with a Sony PMW300?

A: Do not know. I believe it has something like a 9 pin circular adaptor that i in the front of the camera. It works fine with the Sony ex1 and ex1r. I would guess that for sure call up the manufacturer or sony to confirm that it has same functions or look up in manuals.I use it a lot especially when the camera is high and to stop vibrations starting or zooming.

Q: 5. What adapter cable do I need to use this with the Canon Cn20x50? Do I need a 8-pin to 20-pin adapter or does the 8-pin to 12-pin adapter actually fit into the Canon 20-pin on servo?

A: There is an included 8-pin connector that should work.

Q: 6. Could I hit record, then stop + play, and have all eight decks play back in sync?

A: There is the potential to have multiple decks play back and start clips at the same time with the Blackmagic Design HyperDeck Extreme Control. The decks and controller must have the same reference, the media should be the same type, and the clips must be positioned at the same start point before playing.

Q: 7. I'm looking for a longer eyecup and I'm wondering if this is a bit longer than the standard eyepiece? Because looking at reviews for every other other xt4 eyepiece online they seem like poorly made junk.

A: The Think Tank Photo EP-F Hydrophobia Eyepiece for Fuji X-H1, X-T3, X-T2, X-T1, GFX-50s is just a tiny bit longer than the standard eyepiece. This is designed to hold the Think Tank Photo Hydrophobia rain Cover in place.

Q: 8. Will EP-F fit the X-H2s?

A: Yes, the Think Tank Photo EP-F Hydrophobia Eyepiece for Fuji X-H1, X-T3, X-T2, X-T1, GFX-50s is compatible with the FujiFilm X-H2s.

Q: 9. Is this compatible with SONY NEX -EA50?

A: Sorry for the delayed response. The recommended controls for Sony NEX-EA50 is ZFC-5HD or ZC-3DV. The ZFC-5HD has zoom and focus controls for LANC. The ZC-3DV only has zoom controls. Thank you for your consideration.

Q: 10. Compatible with Canon C500 mk1?

A: You would need the Tilta Wooden Handle 2.0 Run/Stop Cable for Canon C-Series Cameras: https://www.bhphotovideo.com/c/product/1431645-REG/tilta_rs_01_s35_sony_3_5_bmd_run_stop.html