The Dalite 87 x 116" Cosmopolitan Electrol Front Projection Screen is a good, solid and reliable choice for school, business or even home use. This screen is a good choice when either your site, budget or demands do not require a permanently recessed installation. 

The built-in motor is quiet and offers reliable and smooth service. The tensioned version of this screen offers a guide cable that maintains even horizontal pressure to hold the surface flat while a custom slat bar with added weight maintains the vertical tension. Its handsome white case blends with any decor.

Dalite offers projection screens for all scenarios - business, education or social. Manual or electric, large or small, wall, ceiling or tripod style - Dalite has a style to suit everyone's needs.

Wall or Ceiling Mount    Non-Tensioned    150" Diagonal    Video Format    4:3 Aspect Ratio    Matte White HC Finish    Front Projection    With Low Voltage Controller    120V, 60Hz

Handsome white textured case blends with any decor

Standard with a Decora style three position wall switch

UL Listed

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

All fabrics are seamless

Related Questions and Answers

Q: 1. Can I lock it to only do the tilt function? We don't want to hit the pan by mistake.

A: The Bescor MP-101 Motorized Pan & Tilt Head does not have a pan or tilt lock.

Q: 2. Will this support the weight of the S1-H and mounted Shogun?

A: It would be pushing the weight capacity once all batteries and accessories are mounted. It would only leave room for a lens that must come in below 1lb.

Q: 3. Will this work for astrophotography?

A: Not just the head, all the controls are manual and the movements are to fast. There may be an additional controller for it that would allow you to do that. But alone is just manual pan and tilt with the controller. Hope that helps.Todd

Q: 4. Can this handle a Sony FS700 with lens ? - the cam is 4lb - with lens - probably hit 6lbs easily

A: The MP-101 can actually support up to 6 lbs, so if the camera you have is only 4 pounds it will work on it.

Q: 5. What do you recommend for mount head? what model tripod is preferred?

A: Kessler K-Pod with Hercules 2.0 head. A rock-solid mate for the OMC Director

Q: 6. Does this come with a carrying case?

A: No. The following unit does not come with a carry case.

Q: 7. Will this work with the dji RS2?

A: The DJI RS2 can work with the YC Onion Hot Dog Bun Motorized Slider (39"). Do consider adding the YC Onion YC RS2 Interlink Module and YC Onion RS 2 Power Supply Module for control and power. View the links below: https://bhpho.to/3wKRPP3 https://bhpho.to/3qHbcog

Q: 8. Is it possible to let it move permanently left to right and back and back and ...over an angle of 90?

A: In Auto mode it will pan back and forth at an angle of 90 degrees. You can also do it for 60 or 30 degrees.

Q: 9. Can it be controlled by a computer?

A: The Bescor Motorized Pan & Tilt Head Kit with Remote Extension & AC Adapter as is does not work with a computer. There might be possible options but none specifically made for it to interface with a computer.

Q: 10. Can this be hard mounted to a wooden surface? Also, is there a way to be able to use a joystick type remote and if so, suggestions?

A: Yes, this can be mounted on a wooden surface but proper screws will need to be used. There are no joystick options available for this device.