ARRI continues to expand its L-Series with the introduction of this L5-C LED 5" Hanging Fresnel in blue/silver, without a cable. The key characteristic of any Fresnel is flood-to-spot capability and the L5-C offers an impressive beam angle adjustment of 14-50°.

The 100-0% dimmable L5-C is a "fully-tunable" white light source, allowing you to match existing fixtures with color temperatures from 2800K to 10,000K. The on-board controller allows full minus green to plus green adjustment as well as RGB+W color gamut color mixing with hue and saturation control, enabling you to match specific shades and skin tones. All functions can be controlled via DMX, an ideal feature for broadcast studios, while RDM permits monitoring of the light's status.

The L5-C produces the equivalent of a 450W tungsten light while drawing only 115W for a savings of up to 75% over traditional fixtures. Low draw and heat means lower HVAC costs in the studio and a quick return on your investment. You can run about fifteen L5-Cs from a 20A, 120V outlet as opposed to three or four 500W tungsten fixtures. Power options include the L5-C's 90 - 250 VAC on-board power supply or 22-36 VDC battery options. This version of the L5-C has a black finish and a removable power cable is available separately so you can match it to your electrical environment.

14-50° Spot-to-Flood Adjustment    Color Control from 2800-10,000K    Full-Gamut Color Mixing    Sliding Stirrup, Choice of Power Cable    DMX and On-Board Control    Can Be Upgraded via USB    Long-Life LEDs    Low 115W Electrical Draw    90-250 VAC, 50/60 Hz, 22-36 VDC

A key element of the versatility of traditional Fresnels is the ability to spot and flood the beam as needed. Whether it's a flood field for a pullback shot or a tight spot for a bright highlight, the continuous ability to focus of the L-Series performance lives up to your expectations. And, unlike traditional Fresnels, which have significant light waste in spot focus, the efficient L-Series optical system maintains the same field lumens in all focus positions.

Whether shaping the beam to isolate talent and set elements or cutting the field to eliminate spill light, control is crucial to lighting. L-Series Fresnels allow you to cut and shape with barndoors and flags just like conventional Fresnels.

Clear, defined shadows traditionally have been solely a trait of single source tungsten and daylight fixtures. ARRI L-Series Fresnels provide the same single shadow properties lighting designers expect, delivering natural results.

With the L5-C, fully tunable white light can be adjusted for different skin tones, camera sensors, and mixed-light environments, while specific color shades can be matched through full gamut color mixing. Unlike other LED fixtures, this level of color control does not involve compromising the quality of the light field. The L-Series is unique in combining uniform light and single shadow rendition with full control of color attributes.

True blue-style focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reaching around the fixture. Full flood-to-spot can be achieved in only three turns.

The ARRI sliding stirrup design enables precise adjustment of the fixture's center of gravity, to compensate for front-end accessories. It also gives you the option of pulling the fixture back and reducing its hanging height.

The strong tilt-lock provides extremely secure locking, eliminating movement and slippage while ensuring the fixtures will stay where you put them.

For broadcast studios, remote fixture control is of paramount importance, and all functions of the L5-C are controllable through DMX. The L5-C is also RDM compatible, providing bi-directional feedback and reporting of system status, hours on the light engine, calibration data from the internal color sensor and current DMX address with the ability to remotely assign and address all fixtures in a DMX network.

The on-board controller has a manual intensity adjustment and additional controls for color temperature as well as plus/minus green to adjust hue and saturation at the touch of a button.

L-Series fixtures reduce electricity usage by 75% and their LED light engines last 200 times longer than normal bulbs, when compared to conventional tungsten Fresnels. These and other cost-saving attributes will combine to affect a rapid return on your investment.

Lighting teams working on location will love the versatility they can achieve in small- to medium-size packages. Several ARRI L5 Fresnels can be run off a single 20A, 120V outlet, as opposed to only two or three 500W tungsten Fresnels.

The L5-C is an expandable platform designed to adapt with the latest enhancements in LED chip performance. The firmware is upgradeable through the USB port on the rear of each unit, accommodating future control protocols such as ACN and incorporating other system enhancements that may become available in due course.

At 3200K, 50°
372 Lux/35 fc at 9.8' / 3m
134 Lux/12 fc at 16.4' / 5m
68 Lux/6 fc at 23' / 7m
41 Lux/4 fc at 29.5' / 9m
At 3200K, 30°
917 Lux/85 fc at 9.8' / 3m
330 Lux/31 fc at 16.4' / 5m
168 Lux/16 fc at 23' / 7m
102 Lux 9 fc at 29.5' / 9m
At 3200K, 15°
3122 Lux/290 fc at 9.8' / 3m
1124 Lux/104 fc at 16.4' / 5m
573 Lux/53 fc at 23' / 7m
347 Lux/32 fc at 29.5' / 9m
At 5600K, 50°
406 Lux/38 fc at 9.8' / 3m
146 Lux/14 fc at 16.4' / 5m
74 Lux/7 fc at 23' / 7m
45 Lux/4 fc at 29.5' / 9m
At 5600K, 30°
989 Lux/92 fc at 9.8' / 3m
356 Lux/33 fc at 16.4' / 5m
182 Lux/17 fc at 23' / 7m
110 Lux/10 fc at 29.5' / 9m
At 5600K, 15°
3361 Lux/312 fc at 9.8' / 3m
1210 Lux/112 fc at 16.4' / 5m
617 Lux/57 fc at 23' / 7m
373 Lux/35 fc at 29.5' / 9m

Related Questions and Answers

Q: 1. Can you use a bowens mount strobe with this modifier?

A: Yes, the Aputure F10 Fresnel Attachment for LS 600d LED Light can be used on a Bowens compatible strobe but you may have to remove the Modeling lamp from the Strobe if you have a screw in version. This will simply extend too far into the F10 Fresnel and may not fit properly.

Q: 2. Is there a scrim that will work with this fresnel?

A: There are currently no scrim options for the Aputure F10 Fresnel Attachment for LS 600d LED Light.

Q: 3. Can this work with the amaran lights?

A: Yes F10 Fresnel Attachment for LS 600d LED Light will work on any light with a Bowens mount.

Q: 4. Does this work with Apurture 1200d?

A: The Aputure F10 Fresnel Attachment for LS 600d LED Light will fit the Aputure 1200D but is not optimized. It is best not to use that combination.

Q: 5. Has anyone used this successfully with a non-pro version AD600?

A: Starting with it in a slightly zoomed out position, the Godox FLS8 Fresnel Lens (B&H# GOFLS8) can easily fit on the Godox AD600BM Witstro Manual All-In-One Outdoor Flash (B&H# GOAD600BM) or Godox AD600B Witstro TTL All-In-One Outdoor Flash (B&H# GOAD600B) as long as the manufacturer's stated 104 degrees Fahrenheit (40 degrees Celsius) maximum temperature is kept in mind. It should be kept in mind that when components are left in hot cars, used with strobes firing at high rates or with high powered LED COBs left on for extended periods, or in direct sun for enough time, their temperatures will exceed the ambient temperature.

Q: 6. Which model is the fresnel for the 1290?

A: According to the Aputure website, the Aputure LS 1200d Pro LED Light is compatible with the Aputure F10 Fresnel Attachment.

Q: 7. can I fit this "F10 Fresnel can I can can I fit this "F10 Fresnel Attachment" to a profoto flash head?

A: This F10 Fresnel Attachment only attaches to Bowens S mount lamp heads such as the Aputure LS 600d.

Q: 8. Is this compatible with the nanlite forza 720B? Like has anyone tried it?

A: Yes, it does fit and work with the nanite Forza 720B.

Q: 9. Is this compatible with Aputure Light Storm LS300X ?

A: Yes the F10 Fresnel Attachment is compatible with the Aputure LS300X.

Q: 10. what's the diameter of inside barndoors holder?

A: The inside diameter for the Barndoor on the Aputure F10 Fresnel Attachment for LS 600d LED Light is approxemelty ten inches.