The Dalite 69 x 110" Model C Manual Front Projection Screen is a perfect choice for either a large lecture or seminar hall, or conference/training room. The screen is designed for heavy use and features lubricated steel ball bearings for a smooth operating system. The screen is accessed via a pull cord.

The CSR mechanism was designed to provide a smooth and safe way for the screen to be retracted into its case. This kind of consistent operation ensures a longer life for the screen. Screens with CSR must be fully extended since there are no intermediate stopping positions.

As an option, you can purchase the screen in any one of seven veneer finishes to give it a more professional, finished appearance. If you prefer not to choose a veneer or laminate, the screen will come with a white casing. In addition, you can also purchase floating brackets which allow the screen to be either wall or ceiling mounted but which also give you the freedom to align the system left/right.

Wall or Ceiling Mounted / Non-Tensioned    130" Diagonal / WideScreen Format    1.85:1 Aspect Ratio    Matte White Finish / Front Projection

Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications

Optional floating mounting brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Matte White fabric up to and including 10' high will be seamless

Glass Beaded fabric up to and including 8' high will be seamless

Video Spectra 1.5, High Contrast Matte White and Silver Matte fabrics available in sizes up to 8' high

Related Questions and Answers

Q: 1. Hi, will this work with a Nikon d5000, do i need any other part/accessory or adapter to start shooting with my camera?tks

A: The VM-110 will work with your Nikon D5000 and a lens that has a front diameter 49, 52, 55, 58, 62, 67, 72, and 77mm.

Q: 2. Is this flash going to work with a sony alfa 55 camera?

A: The Bolt VM-110 will be fully compatible with a Sony Alpha camera body with the use of the Sony Auto-Lock Shoe Adapter: http://bhpho.to/1gjWYR5

Q: 3. It will work witn Canon 5D mark IV ?

A: Yes this ringlight is compatible with the Canon 5D Mark IV and a lens with a front diameter of 49, 52, 55, 58, 62, 67, 72, and 77mm.

Q: 4. Does it work with Sony Alpha 99?

A: works with all reflex , brings many adapters ring in the box

Q: 5. Do you have the Minolta/Sony adapter for this ringlight? Will it just slide into the Sony A99 accessory shoe?

A: No adapter is required if you are using the Sony A99 which features the new Sony Multi-Interface shoe (which is different from the older special Sony/Minolta shoe). The flash will slide right onto the Sony A99s shoe. If you have an older Minolta/Sony camera with their special shoe, you would need the following adapter:http://bhpho.to/108mxYG

Q: 6. Hi. I own a canon EOS6D. i want to know if this product will fit well with my camera on any lens. i have a 24-105mm zoom lens and a 50mm prime. And is it adjustable to work with any lens?

A: The ring light is LED. It will fit most camera hotshoes including the Canon 6D.The light comes with 8 x Adapter Rings (49, 52, 55, 58, 62, 67, 72, and 77mm)The 24-105mm lens uses a 77mm filter size, so that will fit and most 50mm lenses use a 52mm or a 58mm filter size so that is fine as well.

Q: 7. Is it possible to use this on my Sony NEX camera along with an adapter?

A: The Bolt VM-110 LED Macro Ring Light is compatible with the Sony NEX models with one of the 8 adapter rings that come with the ring flash..

Q: 8. will this fit a sigma 10-20mm f4-5.6 wide angle lens

A: The Bolt VM-110 will fit a Sigma 10-20mm f/4-5.6 lens with the use of the 77mm adapter ring that is included with the light.

Q: 9. compatible with sony a6000?

A: It is compatible with the camera body, as Sony uses TTL with the Hot Shoe. The problem is with attaching the adaptor rings to the lens. The standard lens, Sony E-16-50 mm, only has a filter thread of 40.5mm and will not work. The accessory lens Sony E-55-210mm however has a filter thread of 49mm and work nicely. Bottom line is the filter thread size. The VM-110 LED Macro Ring Light supports 8 thread sizes. Hope this helps.

Q: 10. I am using a Fuji hs30exr camera with hotshoe flash mount, will this work with that camera model?

A: it will work but not with TTL metering