The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The shelved frequency response features a smooth +6 dB boost between 2 and 15 kHz. This is the standard response for lavaliers worn on the outside of clothing (lapels, jackets, etc).

A wide variety of colors and connectors are available for use with various wireless transmitters. This version is white and features a Switchcraft TA4-female connector for use with specific* Electro-Voice wireless transmitters.

Shelved Frequency Response    Switchcraft TA4F Connector    Moisture-Resistant Capsule    Low Handling Noise    White

The EMW is available in three frequency response types and this version features a shelved frequency response that compensates for reflections lost when mounted on the outside of clothing and fabric. The shelved response is standard for lavalier microphones worn on lapels, jackets, etc.

The square EMW lavalier is available in a variety of colors that virtually render the entire microphone invisible against the skin, allowing you to select the version that is best suited for your application.

The attached cable is made of durable, break-resistant Kevlar for rigorous use without shorts or wear.

The EMW is credited for providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. Could I attach this handgrip to a regular tripod arm?

A: Yes, you could attach the handgrip in the Tilta Nucleus-M Wireless Lens Control System Partial Kit II (Right Handgrip) to a regular tripod arm. You will also need a clamp with an ARRI-standard rosette adapter.

Q: 2. i have a panasonic varicam lt and want to use one of the 4 pin dc power out ports to power the motors. is it possible and if so i need a male 4pin dc power cable to male 7pin lemo correct? do you have anything?

A: the DC output on the varicam LT will not power this this motor, you will need to power it from the D-tap output of the battery plate

Q: 3. How to fix a motor that will not respond to the handle on the same frequency? The motor LED is red and will not turn white.

A: Unfortunately we can't offer much assistance with this issue via Q&A. To get better support for your Tilta Nucleus-M Wireless Lens Control System connection, please reach out to our product specialists via email using the link below, live chat, or by calling us at 800.606.6969. See: https://www.bhphotovideo.com/find/contactForm.jsp

Q: 4. how can i power the motor from other than dtap?

A: you Can power the motors from from the fiz and handle units although this defeats the purpose when using the fiz. You could also purchase a V-mount adapter so you can use a V-mount with a ptap.

Q: 5. Would this motor and hand grip work on the red Komodo to pull focus? I am wanting to mount a RH grip on a rosette off of a Timmy rail so I can pull focus with both hands on the rig. More of a run n gun type setup. Is this doable? Thx

A: yes this can be mounted on a 15mm rail system on a shoulder mount to pull focus during hand held operation

Q: 6. So I can control a Nano and a this motor with just the left handle?

A: This handle can control either the Nucleus M or Nucleus Nano motor. it can only control 1 motor at a time.

Q: 7. Wired?

A: The controller included in this kit does not have a port for connecting to the follow focus motor with a physical cable therefore it can not operate as a wired solution. This is exclusively a wireless solution and it has a range of up to 1000 feet.

Q: 8. Is the turn ratio adjustable?

A: If you are referring to focus throw, yes you can adjust that with the Nucleus-M.

Q: 9. Can you mount the right handgrip on the Red Komodo Outrigger handle?

A: You could probably mount the Tilta Nucleus-M Wireless Lens Control System Partial Kit V's right handgrip to the RED DIGITAL CINEMA KOMODO Outrigger Handle if you get creative enough, but we would not recommend it, as it would likely be awkward to handle.

Q: 10. Can it do hi+ continuous stills when holding the button down?

A: Yes.