The Dalite 22 x 22' Advantage Deluxe Electrol Projection Screen has been designed in a unique way. First, you install the case while your rough construction is being done. After that, when you are settled in your venue, you choose which screen fabric you need or require. An added benefit to this system is that should you ever need to change screen surfaces, you do not have to disassemble the entire system to do it.  

The screen is enhanced by its handsome white powder coated closure doors and case which provide a clean look and allow easy installation of ceiling tiles. The motor is quiet which is a plus in areas such as school rooms, corporate venues, hospitals and other areas where you prefer a minimum of noise.

Ceiling Mountable    Tensioned    374" Diagonal    Square (Audio-Visual) Format    1:1 Aspect Ratio    Front Projection    120VAC, 60Hz    Matte White Finish

Patented in-the-roller motor mounting system for quiet operation

As screen formats change with technology, fabric replacement is simple and comparatively inexpensive

UL Plenum Rated case

Matte White fabric up to and including 10' high will be seamless; Glass Beaded fabric up to and including 8' high will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric up to and including 8' high will be seamless; High Power fabric up to and including 6' high will be seamless

Related Questions and Answers

Q: 1. Is it possible to shoot in 9:16 ratio? Or just 3:4?

A: Unfortunately Nikon COOLPIX P950 Digital Camera does not offer 9:16 aspect ratio. It offers 4:3, 16:9, 3:2, and 1:1.

Q: 2. will a monopod attach to the bottom of this foot?

A: Yes, like most feet like Really Right Stuff LCF-22 Foot for Nikon NIKKOR Z 400mm f/2.8 TC VR S and NIKKOR Z 800mm f/6.3 VR S it has a 1/4 thread on the bottom of it to fit onto a monopod or tripod. Note it is best for security and fit to use with that plate a Arca-Swiss clamp or a head with a Arca Swiss clamp.

Q: 3. Is the speed of shoot, storing and readiness to shoot again significantly faster than on the P900?

A: The Nikon COOLPIX P950 Digital Camera can shoot continuously up to 7 fps at 16 MP for up to 10 frames, while the Nikon COOLPIX P900 Digital Camera can shoot continuously up to 7 fps at 16 MP for up to 7 frames.

Q: 4. Will the RRS LCF-22 foot work with the Nikkor z 600mm 6.3 S lens?

A: The Really Right Stuff LCF-22 Foot for Nikon NIKKOR Z 400mm f/2.8 TC VR S, Z 600mm f/4 TC VR S, and Z 800mm f/6.3 VR S is not compatible with the Nikon NIKKOR Z 600mm f/6.3 VR S Lens.

Q: 5. Can you use a Polarizing filter with this camera?

A: This camera can use a 67mm circular polarizer such as the Hoya 67mm NXT Circular Polarizer Filter, B&H # HOCPN67 https://bhpho.to/2vmZOEO

Q: 6. is there a warranty on this camera?

A: Yes, the Nikon COOLPIX P950 Digital Camera comes with a limited 1-year manufacturer warranty from Nikon.

Q: 7. Can we use it for smart phone?

A: Not at all. This furry windshield is designed for the cylindrical RODE NTG3 shotgun microphone.

Q: 8. Is this camera allowed in most NFL football stadiums? I know that individually each stadium has their own rules.

A: It would depend on the stadium's policy and generally lenses cannot be longer than 5 inches. The depth of the Nikon COOLPIX P950 Digital Camera is 5.9 inches. I would suggest reaching out to specific venues as they may vary.

Q: 9. Will this also work on the Nikon Z 600mm TC?

A: No but this Kirk will fit the Nikon 600mm f4 Z lens: https://bhpho.to/3X3icJL

Q: 10. What is the length of the opening's interior dimensions? I want to use the WS-8 with my Schoeps mkxxKCY actives setups and I was wondering if all 2 of my capsule/collette combo would fit into the WS-8 so that no wind noise enters from behind the capsule? I use my mkxx capsules with DINa/DIN/ORTF/NOS active bars most of the time if that matters?!?!I know that this page says that the WS-8 is meant for capsules 27mm longmost Schoeps capsules are 20mmx20mm, but I'm not sure if that was as far as a mic would go into the WS-8, since its almost 4 long total? That would seem like a slight waste of space if the opening was only 1 /27mm long. I know the bigger the dead cell/space area, the better the wind protection, but it seems by the looks of it that if a mic went halfway into the WS-8 which would be the 2 I need my capsules to go in, since its almost 4 total, there would still be plenty of dead space for wind dampening :)Id MUCH rather spend the $25 on these versus the $95 the Rycote Classic Softies cost lol :)Thanks a lot,Bean

A: The depth of the hole in the foam is a little over an inch. If you pull the rubber gasket back after the mic is inserted, the fur will stretch to cover an additional half inch or so. You MIGHT be able to get it all the way to your needed extra inch if you really jam it, but you also might end up ripping the stitching over time. Either way, you'd only be covering that inch with fur, not with both fur and foam. For small pencil mics, like my beloved Audix SCX-1, the WS8 works very well. But if you need 2 inches of depth within the foam, this probably isn't the ideal solution for you.(On a side note, here's one other thing to consider about the WS8. It looks exactly like a tribble, and you'll find actresses tend to have an irresistible urge to pet it when it's near them. I'll let you decide whether that's a positive or a negative.)