Sold as a pair, the white Electro-Voice EVID 6.2W is a passive two-way loudspeaker designed for voice amplification and background/foreground music reproduction in clubs, restaurants, and retail stores. Weather resistant and magnetically shielded, it can be used indoors or outside in a variety of positions, even next to video monitors. Each EVID 6.2W is equipped with dual 6" woofers and a 1" titanium tweeter, yielding a frequency range of 62 Hz to 20 kHz, and a continuous program power capacity of 300W when driven by a compatible 8-Ohm power amplifier.

Full-bandwidth overload protection ensures reliable operation without additional external circuitry. The standard Euroblock connector enables simple and secure wiring. The EVID 6.2W features a durable, paintable ABS enclosure with a zinc-coated grille to protect all internal components. The included SAM (Strong-Arm-Mount) accommodates multiple mounting positions, and allows for a high degree of horizontal and vertical directivity.

Passive Design, Magnetic Shielding    Weather Resistant for Indoor/Outdoor Use    Dual 6" Woofers, 1" Tweeter    300W Continuous Program Power Handling    For 8-Ohm Power Amplifiers    62 Hz to 20 kHz Frequency Range    Full-Bandwidth Overload Protection    Euroblock Input    Paintable ABS Enclosure    Includes Strong-Arm-Mount Systems

Installation loudspeaker for indoor and outdoor background/foreground music systems in restaurants, bars, patios, retail stores, and more

Line array–influenced design yields unobtrusive shape and 100° horizontal by 80° vertical coverage

Elliptic baffle symmetrically locates the tweeter in front of and between the woofers

Full-bandwidth overload protection

Conforms to MIL-STD-810 and IP34 for reliable weather resistance

300W continuous program power handling

High sensitivity

62 Hz to 20 kHz frequency range

Dual 6" woofers for extended bass, greater power handling, and increased output

Titanium direct-radiator, high-frequency transducer with neodymium magnet

Magnetically shielded for use near video monitors

Zinc-plated, powder-coated grille with safety leash

Over 100° of swing and 90° of rotation for maximum install flexibility

Strong-Arm-Mount provides excellent strength and reliability

Related Questions and Answers

Q: 1. Can a sony ax3000 be mounted on a Sunpak 5858D Aluminium Tripod?

A: As long as it isn't too heavy. My husband is using this tripod for a Canon 30D and will hold the weight quite fine which is about 7 lbs. Hope this works for you!

Q: 2. New to quick release plates. Will quick release plate fit cameras (Nikon, Panasonic) accepting tripods?

A: The quick release plates included with the Sunpak 6601UT Tripod are standard quick release plates using the standard 1/4 -20 threaded tripod connector to connect to digital cameras. While most all cameras and camcorders use a 1/4 -20 tripod connector, as no camera was listed above, I would recommend checking the Specifications tab for your camera to ensure it has a standard tripod connector for your needs. Most all Nikon, Canon, and Panasonic cameras use a standard 1/4 -20 tripod connector on the bottom of the camera.

Q: 3. its fit a S21 ultra

A: The Sunpak tripod cannot mount a smart phone directly. I would recommend this Xuma smart phone mount: https://bhpho.to/33AXwiY

Q: 4. Wich is the bag for the tripod Sunpak 5858D ?

A: The Giottos AA1251 Padded Tripod Case, B&H # GIAA1251, or the Vidpro TC27 Padded Tripod Case (Black), B&H # VITC27, would work for use with the Sunpak 5858D Aluminum Tripod.

Q: 5. Will this head work with Oben AC-1310 tripod?

A: Yes, it is compatible with the AC-1310.

Q: 6. Does this head accept an Arca Swiss type plate/clamp and camera plate?

A: Yes, the Oben PD-117 is Arca-compatible.

Q: 7. Will the PD-117 Pan/Tilt work with the Oben AT-3586 tripod? I'm looking to buy the Oben AT-3586 kit that comes with the BZ-226T head, but I also need an entry-level pan-tilt head to pair with it for occasional video. This looks like a good match, but wasn't sure if it would fit.

A: Both heads mount via a 3/8"-16 screw, so basically most tripod heads will work with the legs. The PD-117 is not a fluid-head though, so it would work for static video but might be a little jittery and hard to pan with during video. For dynamic shots, consider something more fluid like the Manfrotto Befree Live video head: https://bhpho.to/2RJiPZA

Q: 8. It fits on my canon rebel t6?

A: Yes, will work with any camera.

Q: 9. Can I switch out the head on this with a Vanguard ball/pan head?

A: I don't believe the head is removable on this tripod.

Q: 10. I have this, but mine is very stiff, especially for panning (yes, with the levers loosened). What would be the best way to loosen up the head? Lubricant, a hidden adjustment screw, ____? Thanks for the help.

A: DO NOT!! use anything other than a 'Syl-Glide' lubricant, and when you do, use very,very little!! Available at 'Auto Zone, auto parts store; comes in a 4oz. tube by AGS. for approximately $7.99. You can also use this on your tripod legs. Remember to use very,very little. Make sure that you clean and re-lube periodically as all lubricants do attract dust and fine dirt particles.SuperSniperSal