The Kupo EZ Grip Finger with Baby 5/8" Stud and Receiver has a 5/8" stud on one side and a 5/8" receiver on the other connected by a large ball joint. The baby receiver has a metal knob to lock it securely in place. With the knob removed, the outside of the receiver is a Junior 1 1/8" pin that can fit into any junior receiver. The ball joint is locked in place with a large metal knob with needle bearings to give you maximum torque.

Aluminum Construction    5/8" Pin, 5/8" Receiver    1 1/8" Base Fits into Junior Receiver

Related Questions and Answers

Q: 1. Is this lens compatible with BMD Studio Pro zoom demand and focus accessories?

A: Yes, The Olympus M.Zuiko Digital ED 14-42mm is compatible with the Zoom and focus demand. Also here is a list of all the currently tested working lens models. Which active MFT lenses are zoom servo controllable from the Blackmagic Studio Cameras? Panasonic Lumix G X Vario PZ 14-42mm f/3.5-5.6 Power O.I.S. Lens https://www.bhphotovideo.com/c/product/818962-REG/Panasonic_H_PS14042S_Lumix_G_X_Vario.html Panasonic Lumix G X Vario PZ 45-175mm f/4.0-5.6 Zoom OIS Lens https://www.bhphotovideo.com/c/product/818956-REG/Panasonic_H_PS45175K_Lumix_G_X_Vario.html Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6 EZ Lens (Black) https://www.bhphotovideo.com/c/product/1026122-REG/olympus_v314070bu000_14_42mm_f_3_5_5_6_ez_lens.html

Q: 2. Does this lens have a motorized zoom?

A: Yes, this lens has power zoom or EZ, electronic zoom.

Q: 3. Is it compatible with the DJI Inspire 2 with ZENMUSE X5S. Do I need a special mount?

A: They are compatible. Both the lens and the X5S are micro 4/3 mounts. Here is a list of comparable lenses.DJI MFT 15mm/1.7 ASPH (With Balancing Ring and Lens Hood)Panasonic Lumix 15mm/1.7 (With Balancing Ring and Lens Hood)Panasonic Lumix 14-42mm/3.5-5.6 HDOlympus M.Zuiko 12mm/2.0 (With Balancing Ring)Olympus M.Zuiko 17mm/1.8 (With Balancing Ring)Olympus M.Zuiko 25mm/1.8Olympus M.Zuiko 45mm/1.8Olympus M.Zuiko 9-18mm/4.0-5.6

Q: 4. Hi! I have an Olympus E-M10 Mark II. Is it compatible with it?

A: Hi. Yes it is compatible, i use it with my omd-em1 and my pen-f and it works fine.

Q: 5. What is the maximum length of this lens when it is fully extended? The specs only give the length for when it is collapsed.

A: 1 15/16

Q: 6. Is this lens compatible with Panasonic GX8?

A: Yes, this lens is compatible with the Panasonic GX8 camera.

Q: 7. Will it work with the Lumix GH3?

A: The Olympus M.Zuiko Digital ED 14-42mm f/3.5-5.6 EZ Lens is compatible with the Panasonic GX8 camera.

Q: 8. What charger needs this batterie?

A: Here are some compatible chargers: IDX System Technology UC-PD1 Pocket Travel Fast Charger & Power Supply https://www.bhphotovideo.com/c/product/1699695-REG/idx_system_technology_uc_pd1_pocket_travel_charger.html IDX System Technology D-Tap Advanced Port Battery Charger https://www.bhphotovideo.com/c/product/1319345-REG/idx_system_technology_vl_dt1_d_tap_battery_charger.html

Q: 9. Will the this short handle fit and operate with the TVC-34L at its lowest (on the ground) leg position? Im seeing mixed details about it. It says its a 2.5 handle which should work but, the specs say its 3 which from what I calculate, wouldn't work.

A: The TVC-34L at it's lowest gets the top of the plate down to 4 / 10.16 cm. The Really Right Stuff TA-3 Leveling Base with Short Handle and Platform with 3/8 -16 Stud B&H # RETA3LB MFR # TA-3-LB has a total height (excluding stud): 4.9 / 124mm. The handle on it comes with no hook and is 2.5 / 63.50mm. RRS states these handles do not significantly impact your ability to drop the tripod to ground level. If you are still concerned, RRS has the Really Right Stuff TA-3 Leveling Base with Low-Profile Knob and Platform with 3/8 -16 Stud B&H # RETA3LBLP MFR # TA-3-LB-LP just for you. Its total height (excluding stud): 3.4 / 86mm. Get down baby.

Q: 10. Does this lens come with a lens hood?

A: no it dose not. When you put the lens UV filter on it should be fine.