You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Skb Military-standard Waterproof Case 6 (w/ Cubed Foam)

Skb Military-standard Waterproof Case 6 (w/ Cubed Foam)
  • Product Code: ga242935
  • Availability: In Stock

$524.97 $640.46

Military-Standard Waterproof Case 6 (W/ Cubed Foam) from SKB is constructed of ultra high-strength polypropylene copolymer resin and sealed against dust and water. The hard outer shell is impact-resistant and features a rubber cushion grip handle for easy transport. The cubed foam interior provides full protection for your equipment at all times. An automatic ambient pressure equalization valve self-adjusts based on your altitude. The case is resistant to UV, solvents, corrosion, and fungus, making it the best way to ensure maximum protection for your equipment at all times.

Gasketed, Water & Dust-Tight Design    ATA Rated    Molded-In Hinges    Cushion Grip Handle    Auto Ambient Pressure Equalization Valve    Impact-Resistant    Resists UV/Solvents/Corrosion/Fungus    Trigger Release Latch System    Cubed Foam Interior

Key Specs
ColorBlack
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeCubed Foam
Water ResistanceWaterproof
IP67
DimensionsInterior
1.8" / 4.6 cm (Lid Depth)
Weight7.1 lb / 3.2 kg
Parameters
Camera CompatibilityUniversal
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeCubed Foam
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
Maximum Volume0.7 ft³ / 0.02 m³
Padded InteriorYes
MaterialsExterior: Polypropylene
DimensionsInterior
1.8" / 4.6 cm (Lid Depth)
Weight7.1 lb / 3.2 kg
Packaging Info
Package Weight7.8 lb
Box Dimensions (LxWxH)18.5 x 15 x 7.5"

Cubed foam interior for product protection

Waterproof and dust tight design

Molded-in hinge for added protection

Trigger release latch system

Snap-down rubber over-molded cushion grip handle

Ambient pressure equalization valve

Resistant to UV, solvents, corrosion, fungus

Resistant to impact damage

ATA Rated

Related Questions and Answers

Q: 1. Will a Nikon Coolpix P900 fit in?

A: The lens for the P900 is too large, especially when you zoom out, to fit in this bag.

Q: 2. Will it fit the Sony a7iii with 24-105 sony lens?

A: The Sony Alpha a7 II will fit in the DiCAPac WP-S5 Waterproof Case. But the Sony 24-105 is too large and will not fit.

Q: 3. Will this case fit the Nikon d5200?

A: The Nikon D5200 will fit in the DiCAPac WP-S5 Waterproof Case for Small DSLR Cameras. Make sure the lens you use is 2.0 to 3.75 in length and up to 82mm in diameter.

Q: 4. Will a Nikon D7000 fit in this case?

A: A D7000 would be a bit large for this case. You could try the WP-S10.

Q: 5. Will this product fit a Sony a7SII with Metabones E-EF adapter and Canon 16-35mm II F2.8?

A: This product can fit a lens up to 3.25 but the 16-35mm 2.8 II is over 4 inches. It will not fit.

Q: 6. Will the Nikon D5 with 50mm or 14mm fit in this bag?

A: The DiCAPac WP-S5 Waterproof Case for Small DSLR Cameras would be too small for that camera and lens combination. I recommend this larger version: https://www.bhphotovideo.com/c/product/547694-REG/

Q: 7. Will this case fit canon m50

A: It will fit, but depending on it might be too large; your camera might be swimming in it (pun not intended). Another option would be the DiCAPac mirrorless waterproof case (https://bhpho.to/3hmvO1e) which might be more fitting for the M50 with a smaller lens.

Q: 8. Will my Sony A7ll fit in this case with a 16-35mm lens?

A: The Sony Alpha a7 II will fit in the DiCAPac WP-S5 Waterproof Case. But the Sony Vario-Tessar T* FE 16-35mm f/4 ZA OSS is too long. The widest lens that will fit is the Sony Vario-Tessar T* FE 24-70mm f/4 ZA OSS.

Q: 9. Will this case fit a Nikon coolpix p500?

A: The Nikon P500 will fit in that case but the case is pretty large so the camera will move around a lot.The one listed below will have a little bit better fit.

Q: 10. Will it fit a Nikon D800, without the battery grip?

A: I'm not familiar with that style camera so it's hard for me to answer. I have a D3200 and that fits nicely inside.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Pelican 1120 Case With Foam (yellow)

$149.85 $238.26

Pelican 1200 Case With Foam (black)

$230.85 $341.66

Nanuk 945 Hard Case With Foam (yellow)

$779.85 $1,115.19

Eylar Tall Case With Foam (16.9", Black)

$209.97 $283.46

Pelican 1400 Case With Foam (desert Tan)

$359.85 $489.40

Pelican 1120 Case With Foam (silver)

$149.85 $227.77

Pelican 1150 Case With Foam (desert Tan)

$164.85 $245.63

Products You May Like

Hoya Fog Diffuser 1.0 (77mm)

$146.67 $231.74

Tiffen 46mm Warm Black Pro-mist 1/8 Filter

$168.63 $261.38