This Kupo Baby 5/8" Side Arm Has a 2.04" heavy-duty clamp on one side and dual opposing 5/8" pins on the other. It can be clamped quickly to the riser section of a light stand or to a length of pipe to accept 2 light fixtures or any accessory with Baby 5/8" receivers.

Chrome-plated Steel Construction    19.5" Length    Dual 5/8" Pins    2.04" Jaw

Related Questions and Answers

Q: 1. Does this work with a Sony @6000?

A: This item is generally meant to attach (screw or clamp)to a tripod or object in order to hold lighting, flashes and accessories. You can purchase a number of accessories for this item that will allow you to hold a multitude of additional objects. One such item is a 3/8 to 1/4 adapter that which should fit the standard 1/4 mount thread found on most cameras. In any case I found this item to be great buy and a fine addition to any camera bag!

Q: 2. What's the width of the stand when it's collapsed and closed on the foot end? I'm trying to figure out whether it'll fit in my light stand guess. I,e How wide is are the legs when it's closed?

A: You will need a clearance of 11.5'' x 22'' when the feet are closed to pack your Impact C-Stand with Quick Release Sliding Leg (Chrome). I measure the sliding leg from the tension knob to the edge of the foot.

Q: 3. Does the 244 series attach to Manfrotto's Easylink system found on the Video Fluid Heads?

A: The 244 Micro Friction Arm can attach to Manfrotto's Easylink system found on their video heads and other products.

Q: 4. Is there a mm diameter indicated anywhere for the grip arm itself? Trying to figure out if item #CAC1444 (with 15mm opening) will slide onto it . Thanks.

A: The grip arm would be roughly 5/8" in this C330 Turtle Base C-Stand Kit, but there are no millimeters imprinted on the grip head.

Q: 5. Will this hold a Bowens Gemini 500 monolight with a soft box ?

A: No. It will hold the monolight with no problem but using a softbox will cause it tip with the slightest movement, unless some weight is placed on the opposite leg. Also, there is not much clearance to adjust the angle of the softbox. It is an awesome stand for a single light. I have 2 of them and one I use as a camera tripod when shooting in studio. The pistol grip allows for very quick adjustments.

Q: 6. Is the clamp big enough to attach to the legs of a RRS tripod? Legs have a 5 circumference.

A: No, not with the clamp supplied with the arm. It is really designed to be used with a Manfrotto tripod that has a threaded Easy Link 3/8 socket milled into the spyder. However, a Super Clamp will secure it to a tripod leg, with a considerable weight penalty.

Q: 7. how long is each section of the c stand in cm or inches? Like the main pole? the boom pole? and the legs folded?

A: Impact Turtle Base C-Stand & 20 Grip Arm Kit - 5.9' (Chrome) Turtle base is 21 inches width and 14.5 in height top section 20 middle section 17.5 Bottom section 21- 3/16 measurements in inches

Q: 8. the photo shows 1/4 -20 studs installed on both ends, plus a loose 3/8 -16 stud. But, the description says one 1/4 -20 stud and one 3/8 -16 stud. Which is correct?

A: The arm comes with two 1/4 fittings on it. The extra part is the 3/8 adapter, which you screw onto one end and attach to the tripod. I have the arm holding a 7 monitor and its works great. You tighten the clamp and it stays.

Q: 9. Is this compatible with a Neewer S101-400W PRO light?

A: Yes they would be compatible.

Q: 10. I wonder to know what is flange focal distance for c-mount in the adapter? Is it has smaller reserve distance for infinity or it has a 0.69 inch (17.526mm) FFD? Does focus point match marks on focus barrel?

A: It has the correct C-Mount FFD of 0.69 in. It is designed to reach infinity focus while maintaining the correct registration distance.