The Mark Studio 2 Bass Amp Modeling Software from Overloud is a bass amp emulation software that is modeled on 6 different bass amps and 9 cabinets from Markbass. You can adjust your signal path by selecting 2 mics for simultaneous use from the available 6. A pedalboard including an octave pedal, an envelope filter, a bass chorus pedal, a distortion pedal, and a compressor allow you to further shape and effect your tone. You can also mix your direct signal with the emulated amp direct out and mic output levels.

This software is an upgrade and requires a licensed version of Mark Studio 1.

6 Markbass Amp Models & 9 Cabinets    5 Effects    6 Microphones    Direct, Amp, & Mic Outputs    RTAS, AAX, VST, & AU Plug-In Formats    PC & Mac

• Six Markbass amp models: TA501, R500, Classic 300, TTE500, Little Mark Tube and MoMark
• Nine Markbass cabinets: STD 151HR (rear-ported 1x15"), STD 152HR (rear-ported 2x15"), STD 104HR (rear-ported 1x15"), STD 104HF (front-ported 4x10"), STD 106HF (front-ported 6x10"), Classic 108 (sealed 8x10"), Traveler 121H (front-ported 1x12"), New York 804 (front-ported 4x") and New York 122 (front-ported 2x12")
• Full pedalboard including: octave, envelope filter, bass chorus, distortion and compressor
• Choice of 6 microphones, plus a preset combination of 2 front microphones
• Ultra-flexible signal path makes it easy to balance the Direct (plug-in) input, Line Out (amp direct Out) and Mic Output levels

• Each mic/cabinet combination has been recorded in a high-end studio

• More than one microphone can be used simultaneously: main (woofer), tweeter and, where applicable, rear bass reflex (port).

• Ultra Bass frequency control for extra-deep sound with one mouse click

• Tons of factory presets designed by top engineers and Markbass artists

• Full MIDI support

• Very low CPU usage

• Any parameter can be automated in the plug-in version

Related Questions and Answers

Q: 1. is the flash able to differentiate between a full frame lens and medium format (Fuji GFX) focal length when zooming?

A: According to Profoto, "there are no known issues with the auto zoom function on this flash".

Q: 2. DOESN'T THE NEW 4K8 COME WITH TEN (10) 12G AUX OUTPUTS? (not 2?) 10 FULLY CUSTOMIZABLE AUX OUTPUTS VIA SDI? thanks!

A: Yes, the Blackmagic Design ATEM Television Studio 4K8 offers 10 12G-SDI aux outputs.

Q: 3. What is the latency of a 12g video from input to program output on this mixer?

A: Blackmagic does not list the latency for the Blackmagic Design ATEM Television Studio 4K8 because it is less than 3 frames. The same can be said for their Micro Converters.

Q: 4. Will this work TTL on a canon eos1 35mm camera?

A: The Profoto A10 AirTTL-C Studio Light for Canon requires a digital camera in order to use TTL due to software requirements in order to send the information from camera to the flash. For Canon EOS 1 35mm camera I would suggest manual flash like https://www.bhphotovideo.com/c/product/1712781-REG/godox_lux_senior_retro_camera.html

Q: 5. Will the Profoto A10 or A1x flash for Nikon work in TTL mode with a Canon transmitter on a Canon camera? The lamp is to be standing separately.

A: Unfortunately, no, you would not be able to trigger the Profoto A10 AirTTL-N Studio Light for Nikon or the Profoto A1X AirTTL-N Studio Light for Nikon off-camera using the Profoto Air Remote TTL-C for Canon in TTL automatic exposure mode. TTL automatic exposure would only be compatible when using the Profoto Air Remote TTL-N for Nikon with the above Nikon flashes.

Q: 6. Is There Any Down Converted Output ? if setup working 4K , SDI Output HD. Like Constellation 4K gives 24.output hd conversation.

A: The Blackmagic Design ATEM Television Studio 4K8, similar to the Blackmagic Constellations output is the same resolution and frame rate as the switcher mode. There is no down conversion in the switcher outputs. If you want HD when working in UHD you could use the Teranex AV or Express.

Q: 7. Can the Profoto A10 AirTTL-C Studio Light for Canon be used on a Fuji GFX100S Camera or do you need two separate units?

A: On camera you need the Fuji version, Profoto A10 AirTTL-F Studio Light for FUJIFILM, https://bhpho.to/33dV8xS.

Q: 8. Can I use a Profoto A10 flash for Fuji remotely with a Nikon Z8 if I buy the Profoto Connect unit to fit on my Nikon camera?

A: Yes, you can use the Profoto A10 AirTTL-N Studio Light for Fujifilm remotely with a Nikon Z8 and the Profoto Connect Pro Remote for FUJIFILM.

Q: 9. What is the guide number?

A: The manufacturer lists it as a 76ws flash, but does not list the guide number of the Profoto A10 AirTTL-S Studio Light for Sony BH #PRA10AIRTTLS.

Q: 10. Can the MagMods be used with the Profoto A10?

A: The Profoto A10 AirTTL-C Studio Light for Canon BH #PRA10AIRTTLC can be used with a MagMod MagGrip2.