The Ghost-Eye Wireless 800TC Video Transmission Kit from CINEGEARS includes an encrypted 800TC ENG transmitter with an L-series battery plate, an encrypted 800TC ENG receiver with a V-mount battery plate, XLR power cables, antennas, and a waterproof carry case with a foam insert.

The 800TC transmitter can send video to up to four 800TC receivers with the same level of required AES-128 encryption. The receiver and transmitter support uncompressed 1080p60 video from up to 2625' away, HDMI/SDI cross conversion, and have a low-latency rate of less than 1 ms. The 800TC units also transmit tally information and support talkback so your crew can talk to each other on set via a headset.

Send Uncompressed 1080p60, 10-Bit, 4:2:2    1 x Transmitter, 1 x Receiver Set    2625' Range    Low Latency of <1 ms    Uses License-Free 5 GHz Frequency Band    HDMI/SDI Cross Conversion    Tally and Talkback Features    Auto-Relink/Timecode/AES-128 Encryption    V-Mount Battery Plate on Receiver    Carry Case Included

• Transmit uncompressed, 1080p60, 10-bit, 4:2:2 video up to 2625'
• Up to 4 receivers supported simultaneously on each channel
• Transmitter compatible with 800TC Ghost-Eye receiver with the same encryption level
• Less than 1 ms of latency
• Operates on the license-free 5 GHz frequency band
• HDMI and SDI I/O with cross-conversion capability
• Adaptive signal logarithm compensates for small obstacles in the line of sight
• Auto-relink
• Required AES-128 signal encryption
• Timecode
• Transmitter with L-series battery plate
• Receiver with V-mount plate

Related Questions and Answers

Q: 1. Latency?

A: To transmit video, the MARS 400S uses a 5Ghz frequency band, with up to 400 feet (120m) line-of-sight range. According to Hollyland, the latency is less than 0.1 second.

Q: 2. Hi, There, Will this system work with ATEM and Sony MCX500 Switcher?

A: Yes it will. This has both HDMI and SDI outputs which you can use to connect the receiver to a production switcher.

Q: 3. can these be used for live streaming? Will latency be an issue?

A: This is a point to point transmission system. It does not have live streaming built in.

Q: 4. Can I input HDMI and output SDI or vice verça?

A: No, the Lilliput WS500 Wireless Video Transmission System does not have a HDMI to SDI cross conversion function. SDI signals would only output from SDI. HDMI would only output from the HDMI port.

Q: 5. Will this work with an ATEM video switcher?

A: Yes, this should be possible.

Q: 6. Can this be powered by Panasonic Camcorder 7.2V batteries I use for powering my AG-UX90? Will the batteries fit?

A: Hi Pesi, No that's not fit. The Mars 400S can be power by: a) Sony NPF batteries b) use the DC 2.1 power adapter that comes along c) Use D-TAP to DC 2.1 Power cable to connect the Mars 400S to the V-mount batteries

Q: 7. Is there a way to power both the transmitter and receiver via DTAP?

A: You will need to use a 12V D-Tap cable. This will allow you to power both the receiver and the transmitter.

Q: 8. can i power it of a v-mount battery through the barrel connector via d-tap?

A: Yes, of course.

Q: 9. What kind of battery life can I expect from say a NP-550? And is there a chance for interference with wireless mics?

A: Hi Nathan, for a NP-550, battery life is about 2 hours.There's no interference with wireless mics which usually is 600-900 MHz.

Q: 10. Can this be powered externally? If so, how? USB, plug...?

A: The Hollyland Mars 400 Dual HDMI wireless set can be externally powered by its included DC Power Adapter or with an optional D-tap adapter (SKU: HOMARSDTAPDC). The USB is listed as use for firmware upgrades.