You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Telefunken M80 Custom Handheld Supercardioid Dynamic Microphone (orange Body, Orange Grille)

Telefunken M80 Custom Handheld Supercardioid Dynamic Microphone (orange Body, Orange Grille)
  • Product Code: ga243004
  • Availability: In Stock

$897.00 $1,381.38

Presented in an orange body with an orange grille, the Telefunken M80 Custom Handheld Supercardioid Dynamic Microphone delivers the sonic essence of a condenser in a rugged dynamic design. It features a wide 50 Hz to 18 kHz frequency response and high maximum SPL of 135 dB, making it equally suitable for voice, instruments, or drums onstage and in the studio. The M80 is designed to be an alternative to the midrange-laden character of most dynamic vocal microphones.

The M80's low-mass capsule and super-thin capsule membrane allow a wider dynamic range from a live vocal, providing an intimate feel that's typically reserved for studio condenser microphones. The head and capsule assembly is designed to reduce proximity effect and add low-end clarity while still providing present bass. The M80 also features an American-made, custom-wound, impedance-matching transformer. It ships with a mic clip and leather storage bag.

Supercardioid Polar Pattern    Enhanced Directionality    Wide 50 Hz to 18 kHz Frequency Response    High Maximum SPL of 135 dB    High Immunity to Feedback    Low-Mass Capsule    Head & Capsule Reduce Proximity Effect    American-Made Transformer    Includes Mic Clip & Storage Bag

Key Specs
Polar PatternSupercardioid
Element TypeDynamic
ControlsNo
Frequency Response50 Hz to 18 kHz
Maximum SPL135 dB
Analog Output1x XLR 3-Pin
Power SourcesNo Power Required
Microphone
Polar PatternSupercardioid
Element TypeDynamic
Sound FieldMono
Diaphragm1" / 25 mm
OrientationEnd Address
ControlsNo
PadNo
CircuitrySolid-State
Performance
Frequency Response50 Hz to 18 kHz
Maximum SPL135 dB
Sensitivity1.54 mV/Pa
Connectivity
Analog Output1x XLR 3-Pin
Power
Power SourcesNo Power Required
Operating VoltageNot Specified by Manufacturer
Physical
Mounting Thread Size5/8"-27 Female
Dimensionsø: 1.89 x L: 7.24" / ø: 48 x L: 184 mm
Weight13.65 oz / 387 g
Packaging Info
Package Weight1.5 lb
Box Dimensions (LxWxH)9.4 x 3.5 x 2.7"

  • "Condenser-like" performance in a rugged dynamic design
  • Proprietary capsule assembly designed to reduce proximity effect and enhance vocals
  • Supercardioid polar pattern provides enhanced directionality and immunity to feedback
  • Custom-wound Telefunken T80 transformer
  • Dynamic moving coil requires no batteries or phantom power

Related Questions and Answers

Q: 1. Would this work with a Canon XA60?

A: No, the Zhiyun WEEBILL-S Handheld Gimbal Stabilizer will not work with the Canon XA60. For that camera a gimbal with greater clearance would be needed. the DJI RS 3 or the Zhiyun Crane 3S would be good model to consider.

Q: 2. Will this work on Sony Alpha III?

A: Yes, the Zhiyun CRANE 3S Handheld Stabilizer is compatible with the Sony a7 III Mirrorless Camera.

Q: 3. Can it support Song a7r III with FE 24-105mm f4 lens without removing the eye piece?

A: Yes. The Zhiyun-Tech WEEBILL-S Handheld Gimbal Stabilizer has a maximum load capacity of 6.61 lbs. The combined weight of the Sony Alpha a7R III Mirrorless Digital Camera and the Sony FE 24-105mm f/4 G OSS Lens is 2.91 lbs. There should be no need to remove the eyepiece to use this setup on the WEEBILL-S gimbal.

Q: 4. Is this compatible with the Crane 2 focus motor?

A: It is not. The Crane 2 Focus Motor is only compatible with the Crane 2. For this system you will need BH #ZHGMBC528E instead. https://bhpho.to/3bwAQmn

Q: 5. Is it compatible with Nikon D810?

A: Although one can mount and balance the Nikon D810 on the gimbal, there is no control. Camera compatibility list for control can be seen here: https://bit.ly/38zDhEy

Q: 6. What size of hard case would you recommand to carry it ?

A: Pelican 1500 Case: https://www.bhphotovideo.com/c/product/103636-REG/Pelican_1500_000_240_1500_Case_with_Foam.html

Q: 7. Can the Crane 3S be attached to a jib arm? If so, how does one control the pan/tilt remotely?

A: Yes, the Zhiyun CRANE 3S Handheld Stabilizer can be used with a camera jib. The control of the crane will be heavily limited to the control from your wireless device with the ZY play app utility.

Q: 8. Is it compatible with Canon R6?

A: Yes

Q: 9. Will this work with a Cannon 77D?

A: Yes. That is correct. The Zhiyun-Tech CRANE 3S-E Handheld Stabilizer. This item BH #ZHCRANE3SE • MFR #CRANE-3 S-E, will work with a Canon 77D. The Canon 77D weighs 1.19 lb and the load support for the stabilizer is 14.3 lb Payload

Q: 10. does this work with Leica SL2S?

A: Yes it will however you may need an offset plate and/or counter weight if you choose to use a long or heavy lenses.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Slik Ech-630 Astro Tracker (head Only)

$1,109.85 $1,698.07

Products You May Like

Fsr Fl-500p-8 Floor Box (8" Depth)

$758.85 $1,107.92

Allen & Heath Me-1 Personal Monitor Mixer

$2,295.00 $3,098.25

Swarovski My Junior Binoculars (glacier Blue)

$1,497.00 $2,140.71