The ShutterBoss II Timer Remote Switch for Cameras with a Canon 3-Pin Connector from Vello is a remote shutter release that provides photographers with enhanced levels of exposure control. Featuring specialized functionality such as continuous shooting, self-timer, long time exposures, and interval shooting, the ShutterBoss II is a huge asset to keep in your camera bag. This ShutterBoss is compatible with cameras that have a 3-pin connection, including Canon EOS 5D, 6D, 7D, and 1D series DSLRS, and select mirrorless cameras.

With the ShutterBoss you can set timer delays, exposure times, and intervals up to 99 hours, 59 minutes, and 59 seconds in one-second increments. You can also select from 1 to 399 continuous shots or set the device to take an unlimited number of photos. Since you can set exposures without touching the camera you will capture clear, blur-free images. This remote has a 4-line backlit LCD status display for easy viewing of timer and exposure settings.

The ShutterBoss is great for time-lapse series of blooming flowers, sunsets, or the night sky. It can also function as a simple manual remote shutter release. Simply establish the camera's settings and push the remote's shutter button halfway to focus and fully to shoot. In bulb mode, slide the shutter release button forward to lock and the shutter will stay open until you release it. 

The ShutterBoss II has added two features that will offer easier control over the remote's settings. First is a power off option which gives you the ability to power down the remote to conserve battery life. Second is a reset option that allows the ShutterBoss settings to be reset to default settings with just the hold of two buttons. A default reset is a time-saver when you want to avoid changing each setting individually. 

Whether it's for simple shutter release, extended self-timer options, continuous shooting, long exposures, or time-lapse shooting, the ShutterBoss II Remote puts creative camera control in the palm of your hand.

For Canon EOS Cameras w/3-Pin Connection    Wired Remote Controller    Power Off and Reset Options    Set Timer Delays & Intervals    Set Number of Shots/Unlimited Shooting    4-Line Backlit LED Display    Take Photos without Camera Shake    Great for Time-Lapse Recording    Powered by Two AAA Batteries

Canon EOS: R3, R5 C, R5, 1D X Mark III, 1D X Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 50D, 40D, 30D, 20D, 10D, 6D Mark II, 6D, 7D Mark II, 7D, R5

Set timer delays, exposure times, and intervals up to 99 hours, 59 minutes, or 59 seconds in one-second increments.

Program anywhere from one to 399 continuous shots, or even set the ShutterBoss to take an unlimited number of photos.

The four-line backlit LCD display makes it easy to set the following functions: self-timer, exposure, interval, and number of shots. It is also a status indicator for battery life, timer functions, lock indicator, number of shots, and more.

The ShutterBoss provides an audible beep for the last three seconds of a countdown delay or interval. It will also beep to confirm your settings. The beep can be turned off if necessary.

The ShutterBoss II has been updated with two new features, the Power Off option which gives the ability to power the device off to conserve battery life and the Reset option which allows the ShutterBoss to be reset to the default settings, so that each setting does not need to be reset individually.

Powered by two AAA batteries, it can last for about 60 days of continuous shooting with intervals of 5 minutes and exposures of 4 minutes and 56 seconds. When left on standby, it can last up to 2 years.

Related Questions and Answers

Q: 1. Rebel 8ti

A: The Vello WIreless Shutterboss 4.0 Remote will work along with the Canon Rebel T8i.

Q: 2. Does this have a shutter lock button function like the ShutterBoss II where you lock it on bulb mode and stays lock the shutter until you slide it off from the photo of the remote it doesnt seem to have it?

A: The following unit does not offer a shutter lock button.

Q: 3. Is it possible to depress and lock the shutter button?

A: For delay and bulb shooting you will have these options included as well.

Q: 4. Can LONG: Exposure Time with Timed Interval sequence be paused for manual exposures then restarted at pause point with Start?

A: The Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Sony Multi-Terminal Cameras can be used be paused once in use and then restarted at the same point you stopped at.

Q: 5. can I program the timer to take exposures longer than 30 seconds (ie without having to manually use the bulb button)?

A: Yes. When using the Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras you will need to set the camera to bulb mode in order to create exposures longer than 30 seconds.

Q: 6. How long does the backlight stay on when programming the unit?

A: Backlight remains lit for about 10 seconds.

Q: 7. Does this work with a Nikon D810 and a Nikon D800e?

A: Yes. The following shutter release system will drive both units. As well the following other units Nikon COOLPIX P1000 Nikon COOLPIX P950 Nikon D3200 Nikon D3300 Nikon D3x Nikon D4s Nikon D5 Nikon D500 Nikon D5200 Nikon D5300 Nikon D5500 Nikon D5600 Nikon D6 Nikon D610 Nikon D7100 Nikon D7200 Nikon D750 Nikon D7500 Nikon D780 Nikon D800E Nikon D810 Nikon D810A Nikon D850 Nikon Df Nikon Z5 Nikon Z6 Nikon Z6 II Nikon Z7 Nikon Z7 II

Q: 8. Hello! Can you use this device to trigger video recording on a Nikon Z6? Thank you!

A: No, the Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras is for still shooting only.

Q: 9. What are the advantages of version 4 over version 3 of this item? (use with Nikon D850 and D500)

A: The Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras is very similar to the Vello Wireless ShutterBoss III Remote Switch with Digital Timer for Select Nikon Cameras. The new 4.0 now quickly pair with an Automatic Smart Code. With the 3.0 one had to manually set the channel.

Q: 10. Does this work with my digital canon cameras 70D, 80D and 90D and the mirrorless R5

A: Here is a list of compatible cameras for the Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Canon Cameras. Canon EOS 1D X Mark II Canon EOS 1D X Mark III Canon EOS 1Ds Canon EOS 5D Mark III Canon EOS 5D Mark IV Canon EOS 5D Mark IV Canon Log Canon EOS 5DS Canon EOS 5DS R Canon EOS 6D Canon EOS 6D Mark II Canon EOS 70D Canon EOS 77D Canon EOS 7D Canon EOS 7D Mark II Canon EOS 80D Canon EOS 90D Canon EOS M5 Canon EOS M6 Canon EOS M6 Mark II Canon EOS R Canon EOS R10 Canon EOS R100 Canon EOS R3 Canon EOS R5 Canon EOS R5 C Canon EOS R6 Canon EOS R6 Mark II Canon EOS R7 Canon EOS R8 Canon EOS RP Canon EOS Ra Canon EOS Rebel SL1 Canon EOS Rebel SL2 Canon EOS Rebel SL3 Canon EOS Rebel T5 Canon EOS Rebel T5i Canon EOS Rebel T6 Canon EOS Rebel T6i Canon EOS Rebel T6s Canon EOS Rebel T7 Canon EOS Rebel T7i Canon EOS Rebel T8i Canon PowerShot G1 X Mark II Canon PowerShot G1 X Mark III Canon PowerShot G3 X Canon PowerShot G5 X Canon PowerShot SX60 HS Canon PowerShot SX70 HS FUJIFILM X-T30 Kolari Vision EOS RP Forensics Kit