Balancing value and strong audio performance, the Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that's accessible for home-based musicians, vocalists, and podcasters. The large-diaphragm condenser capsule incorporates a cardioid polar pattern for minimal feedback and off-axis noise, a welcome trait when tracking in untreated rooms. Plus, the supplied custom shockmount helps keep extraneous handling and foot noise down.

Engage the -10 dB pad to increase headroom and capture incredibly loud sources up to 158 dB SPL without distortion. When low-frequency rumble/hum or overwhelming bass invade your signal, turn on the 80 Hz high-pass filter switch to attenuate the lows without resorting to EQ. Since the AT2035 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power, or anything between 11 to 52 VDC.

AT2035 Cardioid Condenser Microphone    In-Line XLR-to-USB Audio Interface    Closed-Back Studio Headphones    Boom Arm with XLR Cable    Nylon Pop Filter with Gooseneck    Boom Clamps on Desk or Table    Shockmount Isolates Mic from Vibrations    Cardioid Polar Pattern Reduces Ambience    Switchable 80 Hz High-Pass Filter    Selectable -10 dB Pad

Balancing value and strong audio performance, the Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that's accessible for home-based musicians, vocalists, and podcasters. The large-diaphragm condenser capsule incorporates a cardioid polar pattern for minimal feedback and off-axis noise, a welcome trait when tracking in untreated rooms. Plus, the supplied custom shockmount helps keep extraneous handling and foot noise down.

Engage the -10 dB pad to increase headroom and capture incredibly loud sources up to 158 dB SPL without distortion. When low-frequency rumble/hum or overwhelming bass invade your signal, turn on the 80 Hz high-pass filter switch to attenuate the lows without resorting to EQ. Since the AT2035 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power, or anything between 11 to 52 VDC.

• B&H is proud to be partnering with Audio Test Kitchen, the world’s most comprehensive online audio product comparison platform, to improve the resources provided to our customers shopping for the right microphone for their given application.
• This provides you with the ability to listen to a growing selection of microphones with spoken word recordings captured in a standardized environment, with levels matched by the talented engineers at Audio Test Kitchen in its impressive reference studio.
• Audio Test Kitchen records microphones under identical conditions so you can compare them, apples-to-apples. The source, signal chain, and level never change. The only differences you will hear are between the microphones.

Designed for critical home/project studio applications and live performance, this side-address cardioid condenser delivers detailed sonics and low noise. With its smooth, natural sound, the AT2035 is ideal for musicians, streamers, podcasters, and other content creators.

Equipped with a switchable 80 Hz high-pass filter and -10 dB pad, the AT2035 easily handles high sound pressure levels (up to 158 dB) and avoids the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically coupled vibrations.

Along with its rugged construction and high-performance specifications, the AT2035 provides reliable consistency from model to model. It comes with a protective pouch and a custom shockmount.

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• Switchable 80 Hz high-pass filter and -10 dB pad
• Custom shockmount provides superior decoupling from vibrations
• Operates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps
• Balanced XLR 3-pin output connector

Related Questions and Answers

Q: 1. What is the native / base ISO?

A: The native/base ISO sensitivity setting for the Sigma fp Mirrorless Digital Camera is ISO 100. The standard ISO range is from ISO 100-25600, while the Expanded sensitivity options are ISO 6, 12, 25, 50, 51,200, and 102,400.

Q: 2. Will this come in black, or just desert camo?

A: At this moment this is the only color choice for the Atomos Ninja Ultra.

Q: 3. Does Sigma fp have B mode and T mode for long exposure? What is the longest time for long exposure?

A: Shutter Speed Electronic Shutter 1/8000 to 30 Seconds Bulb Mode

Q: 4. What is the typical power consumption?

A: The instruction manual for the Sigma fp Mirrorless Digital Camera states you can capture approximately 280 images on the provided Sigma BP-51 Lithium-Ion Battery Pack (7.2V, 1200mAh) at 23°C (73°F) on a full battery charge, based on CIPA test standard, and continuous shooting capture time is approximately 70 minutes per full battery charge .

Q: 5. Is it compatible with 500 gb or 256gb Samsung T5? It is strange , but the manual says only about 1TB and 2TB

A: given the amount of data the camera generates, not worth using drives smaller the 1TB

Q: 6. What is the Native ISO?

A: The base native ISO for the Sigma fp Mirrorless Digital Camera would be ISO 100. The standard ISO range for the camera is ISO 100-25,600; the expanded sensitivity settings for the camera are ISO 6, 12, 25, 50, 51,200, and 102,400.

Q: 7. WILL ANY SONY E-MOIUNT LENS FIT THE FP ?

A: The camera was designed to work with Leica L mount lenses.

Q: 8. why the new firmware does not come out on Shogun 7 with support for new cameras and the RAW format. Shogun 7, you have a top model from a small format, and updates come out only for Nina V. I made a mistake that I bought Shogun 7 and it was better to buy Ninja V or will you update the firmware?

A: the shogun 7 support SDI raw formats from all the cameras that have SDI raw formats. This unit is designed for SDI cameras which is why it does not have a lot of the HDMI Raw formats

Q: 9. I want this for the switching capability but all my cameras are HDMI out. Will there be a HDMI input version or must I use HDMI to SDI converters for each feed?

A: Hello Donald, at the moment there isn't, you can just buy a few HDMI to SDI converters which range from 39-99$ for decent ones. ours are $99 a piece and are very low watt (you can even use a cellphone charger! to power it), but we are taking feedback/Request. Thank you.

Q: 10. when you say which recorder will support Sony fx 9? how many months have passed and still no information

A: If you are referring to 16-Bit RAW from the FX9 when using the Sony XDCA-FX9 extension unit, that will be compatible with Atomos' Neon line with future firmware updates. https://bhpho.to/2VSPZJs