The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The flat frequency response is well suited for capturing instruments and general vocals in stage performances, trade shows, houses-of-worship, auctions, lectures, and much more.

Flat Frequency Response    Hardwired 3-Pin XLR Connectior    Moisture-Resistant Capsule    Low Handling Noise    Black

The EMW is available in three frequency response types. This version features a flat response for capturing vocals, various instruments, and ambiance.

The square EMW lavalier is available in various colors that virtually render the entire microphone invisible against the skin.

The attached cable is made of a durable, break-resistant Kevlar for rigorous use without shorts and wear.

The EMW is credited with providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. I have an old Bogen 3021 tripod. Wanting a better head for it. Will this fit and be a good choice? I do lots of video and still phots and need better ability to pan and smoothly move the camera

A: Pans and tilts pretty smoothly for the low cost. Pan is a little tight even when you back off the lock screw. Tilt drag can be adjusted a bit better than pan.

Q: 2. dies it come with a bubble level and can I use it with a sony pxw x70?

A: A bubble level is included and it is a great option for that camera.

Q: 3. Is comatible with Zyhun Crane 2 ?

A: Yes, the Crane 2 uses a Manfrotto style quick release plate.

Q: 4. What is the leveling range of the Leveling Column Kit?

A: It is in the range of approximately 30°.

Q: 5. How tall is the tripod and will it work with the FS5?

A: The tripod has a maximum height of 63 inches, add another 3.75 inches for the head and the total will be 66.75 inches. The MVH500AH head in this kit has a load capacity of 11 pounds, which would be enough for the FS5.

Q: 6. What is the diameter of the metal part of the pan handle? I want to attach a Nikon MC-N10 with an appropriate clamp.

A: You should be able to use the following rosette clamp to attach the Nikon MC-N10 handle to the Manfrotto pan arm. CAMVATE Multipurpose Super Crab Clamp & ARRI Rosette Mount M6 Female Thread BH #CAC2869

Q: 7. Can this tripod system (500AH + 755XB) handle a small slider? (Edelkrone slider plus/small - 1.5kg). My camera is a Panasonic GX8 + 12-35mm/f.28 lens (792g)

A: You are good to go since this combination can handle much bigger cameras then the GX8. Since I like tripods and heads to have overcapacity, your camera will be a great match for this tripod. My favorite feature of the 755XB is that the top of the column can be leveled without adjusting the legs. When ever shooting video, make sure to level the head so you are ready to pan and not make your audience think they are on the Titanic.

Q: 8. Does a carrying bag come with it?

A: This tripod does not come with a carrying bag, unfortunately.

Q: 9. Is this tripod allowed in disneyland? it states in disneylnd faq that they allow tripods but not large tripods. Is this considered Large?

A: The Disneyland rule is Folding tripod stands or monopod stands that can fit inside a standard backpack are permitted. The folded length of this tripod and head is about 30 which would require a rather large backpack. My opinion is that probably the Park would allow it but that of course is up to the security staff. You may wish to consider this smaller Manfrotto with the MVH500AH Head, and the MT190XPRO4 Legs. It's folded length is about 25 . Finally, here is a very small yet capable travel tripod and head the Benro Aero 4 Video Travel Angel Tripod Kit which is only 21.7 when folded.

Q: 10. Can I mount a fluid head (Manfrotto MVH500AH Flat Base Pro Fluid Head) onto the Manfrotto 560B-1 Fluid Video Monopod with Head Replaces 560B?

A: From the looks of the photos, it doesn't look like you could replace the head itself. The Manfrotto MVH500AH has a 3/8 female screw hole. The Manfrotto 560B-1 has a 1/4 quick release plate. So the two would not work. It doesn't say that you can remove the head completely and if it has a 3/8 screw to mount a new head on. If you wanted you could get an adapter for the 1/4 plate to mount a 3/8 female thread.