Insignia 400W Pc Power Supply

Elinchrom D-lite 400w/s Rx 4 Flash Head

Product Code: ga243159
Availability: In Stock

$1,151.85 $1,704.74

Qty

0 reviews Write a review

Description
Reviews (0)

The Elinchrom D-Lite 400W/s RX 4 Flash Head raises the bar on the capabilities of a lightweight, portable strobe. The auto-sensing, multi-voltage flash D-Lite RX 4 recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a lightning-fast 0.35-1.6 sec. (115V) with flash durations as short as an action-stopping 1/800 sec at full power. But that's just the beginning.

The D-Lite 400W/s RX 4 is packed with professional and convenience features usually found in flash heads twice its price. Forget about tripping over PC cords. Although this head accepts one it also has a built-in EL-Skyport Receiver with eight frequency channels that can handle four distinct groups of flashes. Separate purchase of the EL Skyport ELS Speed Transmitter not only allows you to trigger your flash at distances up to 393' but gives you control of power on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional Wi-Fi module to the transmitter and you can use specially designed apps that allow full remote control via your for iPhone, iPad or iPod Touch.

D-Lite 400W/s RX 4's bayonet mount accepts all Elinchrom accessories and softboxes up to 53" (135 cm). It comes with a power cord with a U.S. plug, sync cord, flash tube and protective cap. The included 120V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.

Reflector not included

Built-in Skyport Wireless Receiver Multi-voltage Monolight: 90-260VAC Recycling: 0.35-1.6 Sec. (115V) Flash Duration: 1/800 Sec (Full Power) 5 Stop Power Variability in 1/10 Stops Pre-Flash Detector Fan-Cooled, Auto Dump Optional iPhone, iPad, iPod Touch Apps Accepts 7-8 mm Umbrella Shafts Firmware Update Options

Key Specs
Item Type	1x Monolight
Includes Flash Tube	Yes
Included Light Modifier	1x Reflector
Included Storage Case	No
Power Range	25 to 400 Ws
Power Control	5-Stop Range in 1/10-Stop Increments
Recycle Time	0.35 to 1.6 Sec
TTL Metering	No
Modeling Light	1x 100 W Tungsten Bulb Included (120 V)
Wireless Remote Control Type	Radio/RF Receiver Built-In Bluetooth *Adapter Required (Not Included) Optical Receiver Built-In
Sync Speed	1/250 Sec
Power Source	AC Power (Cable Included)
Inputs/Outputs	1x Barrel / Coax Female Flash Sync Input 1x IEC Female Power Input (90 to 260 VAC, 50 / 60 Hz)
Fixture Mounting	1x 5/8" Receiver
Weight	3.3 lb / 1.5 kg
Light Fixture
Item Type	1x Monolight
Includes Flash Tube	Yes
Included Light Modifier	1x Reflector
Included Storage Case	No
Power Range	25 to 400 Ws
Power Control	5-Stop Range in 1/10-Stop Increments
Recycle Time	0.35 to 1.6 Sec
Color Temperature	Not Specified by Manufacturer
Flash Ready Indicator	Audio & Visual
TTL Metering	No
Cooling System	Fan
Umbrella Mount	Yes
Front Accessory Mount	Elinchrom
Replaceable Flash Tube	Yes (User Replaceable)
Modeling Light
Modeling Light	1x 100 W Tungsten Bulb Included (120 V)
Socket Type	E27
Control Modes	Full, Off, Proportional
On/Off Switch	Yes (Requires Transmitter)
Connectivity
Wireless	2.4 GHz Radio/RF Bluetooth *Via Optional Adapter
Wireless Remote Control Type	Radio/RF Receiver Built-In Bluetooth *Adapter Required (Not Included) Optical Receiver Built-In
Mobile App Compatible	Yes, Adapter Required (Not Included): Android & iOS App Name: Elinchrom
Wireless Channels	8
Wireless Groups	4
Wireless Frequency	2.4 GHz
Wireless Range	393' / 120 m (Radio/RF)
Flash Duration	1/800 Sec
Sync Speed	1/250 Sec
Sync Voltage	5 V
Power & I/O
Power Source	AC Power (Cable Included)
Inputs/Outputs	1x Barrel / Coax Female Flash Sync Input 1x IEC Female Power Input (90 to 260 VAC, 50 / 60 Hz)
Input Power	90 to 260 VAC, 50 / 60 Hz
Included Adapter / Cable	1x USA Type-A/B to IEC Male Cable
Auto Dump	Yes
Mounting
Fixture Mounting	1x 5/8" Receiver
General
Display	No
Dimensions	10.2 x 7.5 x 5.5" / 26 x 19 x 14 cm
Weight	3.3 lb / 1.5 kg
Packaging Info
Package Weight	5.5 lb
Box Dimensions (LxWxH)	15.1 x 8.25 x 7.15"

Built-in EL-Skyport receiver for triggering

8 Frequency channels with 4 groups

Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras

Pre-Flash detector system to enable the use of D-Lite RX with speedlights

Power Auto-dump

5V sync socket for maximum protection of digital cameras

Automatic temperature controlled ventilation

Multi-voltage auto-detection: 90-260VAC (excluding modeling lamp)

Lightweight but strong housing. Robust, functional and elegant

Accessory bayonet accepts all accessories and Rotalux softboxes up to 53" (135 cm)

Rubberized large handle with spare fuse storage

Stand bracket with extra umbrella fitting for larger umbrella shafts

Take full control of your unit's settings with the optional EL-Skyport App for iPhone, iPad and iPod Touch via the optional WiFi module

Additional features such as Flash-Delay for strobing-effects can be accessed

via the free EL-Skyport Software

Visual Flash Confirmation option. The modeling lamp comes on to confirm the flash has been triggered and goes off when recycling

Proportional adjustment of the modeling lamp

Variable f/stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available

Programmable ready beep function

Firmware update option

Related Questions and Answers

Q: 1. Is this compatible with the godox v1-c flash the round head flash

A: This softbox comes with the older bracket. To use it with a Godox V1 you would need the new bracket https://bhpho.to/34jdQ6K.

Q: 2. can the grid be purchased separately? i need to get a grid for mine.

A: Unfortunately Godox does not offer the grid for sale as an accessory. For their softboxes you have the option of with or without at time of purchase only.

Q: 3. Is there a grid that would fit this?

A: No, there is no grid made to work with the Godox S-Type Bowens Mount Flash Bracket with Softbox Kit (23.6 x 23.6").

Q: 4. Can this be used with an ELB 500 or 1200 power pack?

A: Unfortunately, this ringflash is not compatible with the Elinchrom ELB 500 or 1200 packs.

Q: 5. Is this a quick setup softbox, twist to unfold and twist to fold?

A: This is a collapsible softbox with a easy twist assembly.

Q: 6. will this work with AD200 Pro II?

A: Yes, the Godox EC200 Extension Flash Head is compatible with the Godox AD200Pro II.

Q: 7. Is this the model I need to mount a Nikon SB-800 speedlight?

A: Correct this model will work with speedlights.

Q: 8. I have a Fujifiljm X-T2 and need to have TTL and HSS connectivity with couple of Nikon SB700 flashes. Will I be able to do this with MX-15+ / RX-15 combination? Will I also be able to mount the SB700 on top of MX-15+ for occasions when I need to use on-camera flash? (still with TTL and HSS?) Would greatly appreciate your help.

A: You would be able to use this combination for TTL and HSS connectivity along with your SB-700 flashes and your Fuji X-T2. You can also mount an SB-700 on the MX-15 Transmitter while it is on camera to fire another SB-700 off camera, also with TTL or HSS.

Q: 9. It looks like this is Elinchrom's MFR #EL26346 OCF adapter plus a metal reflector. Is that the case?

A: Yes, the rubber gasket has a built in reflector built into it.

Q: 10. Does it work with Sony a6700?

A: The Godox H200 Speedlite Flash Head is an accessory for the Godox AD200 off camera strobe, https://bhpho.to/2JchDg3.

There are no reviews for this product.