This Alta Pro 263AB 100 Aluminum-Alloy Tripod Kit from Vanguard supports up to 15.4 lb, measures 28.1" when folded, and includes an SBH-100 ball head with QS-39 Quick Release Plate. Each of its 3-section legs features an independent spread as well as flip locks for fast deployment. Together, the three legs can be can be positioned for a minimum height of 56" to a maximum height of 68.1" with the center column fully raised. Foam covers on each of the legs provide a secure, comfortable grip while moving the tripod, and rubber feet each with a twist-out, metal spike further enhance stability on a wide variety of surfaces, including soft and uneven soil.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the QS-39 Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. The quick release plate features a rubberized, non-slip platform while two built-in bubble levels are located along the edges of the clamp.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Toward the side of the ball head opposite the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

For added versatility, the center column is connected to the tripod by a fulcrum which enables 90° of upwards or downwards tilt that can be locked into place. Additionally, the center column assembly permits 360° of independent rotation. With the ability to push and pull the center column, those tilt and swivel movements allow the center column to be used as an extendable cross arm or a miniature camera boom. This allows an attached camera to be easily raised toward an elevated subject or over a scene. A camera that is placed toward the end of center column can be positioned perpendicular to the tripod, and extended past the tripod's legs, which is particularly useful for copy stand or macro photography. For subjects along the ground, the center column can also be used to obtain low angles while the tripod's user is positioned comfortably behind the camera.

A carry bag is included for storage or transport.

Load Capacity: 15.4 lb, Leg Sections: 3    Tiltable & Rotatable Rapid Center Column    Swivel 360°, Tilt 90° Up or Down    Aluminum-Alloy Legs, Flip Locks    Maximum Height: 68.1"    Minimum Height: 56"    Folded Length: 28.1", Weight: 5.4 lb    Ball Head, Quick Release Plate    Independent 360° Pan, 90° Tilt    Dual, Built-In Bubble Levels

• Supports up to 15.4 lb
• Push-and-pull rapid center column for rapid positioning
• Can be set to a minimum height of 56" to a maximum height of 68.1" with the center column fully raised
• For added versatility, the center column is connected to the tripod by a fulcrum that enables up to 90° of upwards or downwards tilt
• Center column assembly permits 360° of independent rotation
• Tilt, swivel, as well as push-and-pull movements allow the center column to be used as an extendable cross arm or a miniature camera boom
• Hexagonal shaft design provides center column with increased torsional rigidity
• Aluminum-alloy legs each feature 3 sections, flip locks for fast deployment, and can be independently spread
• Legs can be locked at 25°, 50°, or 80° angles
• Foam covers on each of the legs provide a secure and comfortable grip
• Rubber feet with twist-out, metal spikes further enhance stability on a wide variety of surfaces, including soft and uneven soil
• Built-in tripod bubble level, ballast hook, and 1/4"-20 mount for direct attachment of accessories that feature 1/4"-20 female accessory threads
• 1/4"-20 to 3/8"-16 mount adapter for attachment of accessories that feature 3/8"-16 female accessory threads
• Weighs 5.4 lb, measures 28.1" when folded

• Magnesium-alloy ball head with quick release clamp
• Compatible with tripods or support systems that feature a 1/4"-20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Secondary locking knob with knurled surface allows head to rotate 360°
• Integrated clamp on top of on the ball-and-socket joint is compatible with included QS-39 Quick Release Plate
• Two built-in bubble levels along the edges of the clamp

Related Questions and Answers

Q: 1. can I mount a nikon 70-200 zoom on this using the foot plate since it will not accept arca type plate ?

A: Yes! It comes with 2 of it's own plates :)

Q: 2. Is the quick release plate compatible with an arca tripod plate?

A: The QS-39 is a proprietary Vanguard quick release and will not be compatible with Arca Swiss.

Q: 3. Are the included plates arca-swiss compatable?

A: No, the included plate is proprietary and not Arca compatible.

Q: 4. Is a SINGLE, longer 1/4-20 screw stud available to insert into the top head? It seems that if using male and female adapters, the camera will be resting solely on the adapter rather than flat on the shoe.

A: We're not quite sure which part you're referring to as the "top head", but the SBH-100's quick release plate uses a standard 1/4"-20 screw for attaching your camera/device, and the Vanguard Alta Pro 263AB's mounting platform uses a 3/8-16" for attaching a ball head. If you mean the double-ended screw used to secure the ballhead, the internal threads of the center column assembly use a 3/8"-16 screw and a single 1/4"-20 might not do well enough to secure a ball head using a bushing adapter.

Q: 5. How small can this get?

A: The folded length for storage is 28.1"

Q: 6. Can the proprietary Vanguard clamp be removed and an Arca clamp mounted instead?

A: You would be able to replace the ballhead.

Q: 7. Does this work with a Canon EOS 60D?

A: Yes it does.

Q: 8. I know the ball head is included. But is their a reuglar plate to attach the camera or other accessories? Also, most of the reviews I read was about photography, would this be a good tripod for DSLR filmmaking?

A: While this tripod is ideal for still photography, a more ideal tripod for video would be the Vanguard ALTA Pro 2 263AV Aluminum Tripod with Alta PH-114V Head, B&H # VAAPR2263AV. This tripod incorporates a pan/tilt head specifically for video use. https://bhpho.to/2lPPJei

Q: 9. Is it change to Sunwayfoto DDC-60i Screw-Knob Clamp (60mm) ?

A: It is our opinion that changing the Vanguard top plate is probably not possible.

Q: 10. Hi, Is there an international warranty with this product? If not, is one available with some extra fee? Thanks!

A: The manufacturer's warranty is valid in the US only, however, we do offer an extended service plan through a third party company called Square Trade, which provides international coverage. You can find out more about Square Trade here: http://bhpho.to/1fMHaTB