Confidently display and mount your compatible iPad or tablet while also protecting it with the 2-In-1 Security Multi-Flex Tablet Stand and Wall Mount from CTA Digital. This multi-flex tablet stand gives you a few different setup options as it unfolds as a tabletop display and it also comes with two mount-anywhere bases, giving you the option to install on a wall or under a cabinet. Two flexible hinges let you adjust the viewing angle to your preference, and the headpiece rotates 360°, so you can put your tablet in portrait or landscape mode.

You can resize the corner grip holders to accommodate a tablet between 7-14" and supports rugged tablet cases up to 1" thick. To prevent theft, this tablet stand features a push-button lock and cable system when in tabletop mode. Moreover, it has a K-slot headpiece lock and slot on the stand legs to prevent removal from mount bases while mounted on a wall or installed under a cabinet.

Compatible with Most 7-14" Tablets    Locking Tablet Holder    Tablet Holder Rotates 360°    2 Mount-Anywhere Bases    2 Flexible Hinges for Angle Adjustment    K-Slot Headpiece Lock    Resizable Corner Grip Tablet Holder    Works with Cases up to 1" Thick    Includes Security Cable

Locking tablet holder protects device from theft

Two mount-anywhere bases cradle stand for wall and under-cabinet displays

Security cable anchors stand to any permanent fixture while in tabletop mode

K-slot headpiece lock and slot on stand legs prevent removal from mount bases while in wall or under cabinet modes

Easily resizable corner grip tablet holder

Case compatible with cases up to 1" thick

Two flexible hinges enable easy angle adjustment

Tablet holder rotates 360° for portrait and landscape orientations

Compatible with most 7-14" tablets including iPad 10.2" (7th Generation), iPad mini 5, iPad Air 3 (2019), 11" iPad Pro, 12.9" iPad Pro Gen. 3 (2019), iPad Gen. 6 (2018), and more

Related Questions and Answers

Q: 1. Will this work on a track? What kind of track will it work on? Is there a specific Make & Model? Thanks

A: Generally speaking, this type of dolly is best only for expedient moving of the camera between set ups. In order to do on-camera moves, this type of dolly needs track. Here is one solution I recommend for it has studio wheels for off camera moves but then also comes with a set of dolly track wheels. Glide Gear SYL-960 Floor/Track Hybrid Tripod Dolly B&H # GLSYL960 plus it's track: Glide Gear Straight Track with Carry Bag (12') B&H # GLSYL101.

Q: 2. will this work with the godox c-stand ?

A: When extended, the working footprint of the Magnus DWF-2 Universal Tripod Dolly (B&H# MADWF2) is 31" (79cm). However, the footprint of the Godox C-Stand that we were able to find online is over 37" (95cm). Therefore, that Godox C-Stand would not fit on the Magnus Dolly. Please keep in mind that the Magnus DWF-2 is designed for tripods rather than for light stands such as C-stands.

Q: 3. Can this bag fit a z9 body + 800mm f6.3 lens?

A: Yes, the Manfrotto Pro Light Flex will accommodate the following camera and lens combo.

Q: 4. Is it possible to subsitute both 32in umbrellas for 1 45 and 1 60?

A: Possibly, if the diameter of the umbrella shafts are the same. I haven't replaced mine, although the stands seem quite sturdy enough for the 45, not sure if the 60 would hold up. Especially if they are deep throw umbrellas, those probably wouldn't support that type. Also, if you plan to use them outdoors make sure you use some sand bags to keep them from blowing over. Hope this helps!

Q: 5. I need a 6" TTL cord for a Panasonic GH-4 ?

A: Please review the following item. Energizer Multi-Fit TTL Flash Cord for Select Digital Cameras BH #ENETTLU • MFR #ENE-TTLU https://bhpho.to/3rDPYHw

Q: 6. Will E-Image Two Stage Aluminum Tripod fit here?

A: The combination of the DWF-2 and an E-Image tripod is not known by B&H. However, the DWF-2 has a good reputation of working with various manufacturers tripods thus it is our opinion this has the best chance of working since E-Image does not provide a dolly of their own.

Q: 7. Is this compatible with the Magnus PV-3330G Photo/Video Tripod?

A: Yes, the Magnus DWF-2 Universal Tripod Dolly would work with the Magnus PV-3330G Photo/Video Tripod with Geared Center Column.

Q: 8. Does this EF mount kit work with other EF mount lenses?

A: No, the Canon EF Mount Kit for 20-50mm T2.4 L FP & CN-E45 135mm T2.4 L FP PL-Mount Flex Zoom Lenses is designed to replace the EF mount on the Canon CN-E 20-50mm and 135mm lenses, it is not a lens adapter, it's a replacement mount for those lenses.

Q: 9. what is the size of the screws that connects the wheels to the legs?

A: The screw size is 9.6mm or 3/8 .

Q: 10. What are the measurements for the tripod completely collapsed?

A: The tripod folds to 24 inches. Complete specifications are available on the B&H product page under SPECS.