Connect your high-resolution source device to your compatible display over a long distance with the 328.1' TechLogix Networx MOFO-HD20ST-100SP Armored High-Speed Optical HDMI Cable. It cones on a reel for stage or industrial use and supports resolutions up to 4K UHD, plus HDR and HDCP 2.2 for use with various types of broadcast and streaming content. It uses fiber optic wiring to support long cable runs and virtually eliminate EM and RF interference. The cable is powered by your HDMI devices, so no external power source is required. It features a directional design, with headshells designated for your source and display. Weatherproof headshell caps are preinstalled to keep the terminals safe during transport.

Supports 4K UHD, HDR, 4:4:4 Color    Internal Layer of Steel Armor    Directional Design    Installed on Tactical Reel    Weatherproof Headshell Caps

• Tactical jacket with internal 200CU stainless steel micro-armor
• Metal HDMI headshell supports pulling through 1 inch conduit
• Includes factory-installed weatherproof headshell caps
• No power required
• Completely immune to electrical and RF interference
• 4-channel 850nm VCSEL array optical transmitter
• 4-channel GaAs PD array optical receiver

Related Questions and Answers

Q: 1. Does this Camera support SDI Out through a module add on?

A: That would depend on the specific type of module add on you are referring to and whether that device would have the capacity to loop through the SDI signal.

Q: 2. it have slowmotion?

A: Yes it does. It is able to shoot 6K at up to 75fps along with 4K at up to 120fps.

Q: 3. will the camera shoot 24P??? 30p is horrible and this seems like a huge mistake.

A: Yes, this camera will shoot 24p.

Q: 4. Will this support 24 or 25 fps in all it's recording modes?

A: This camera supports up to at least 30fps for all modes. It will support 24 and 25fps for most, if not all, modes.

Q: 5. Does this camera display battery remaining in volts or percent?

A: It is displayed in voltage.

Q: 6. What would the result be when mounting an MFT lens that doesn't fully cover the sensor, and is it possible to use those if you have to crop to 4k?

A: Some Micro four thirds lenses do cover larger sensors, even though they are made for micro four thirds, such as the Rokinon 12mm T2.2 Cine (RO1222M43), which covers APS-C. However, this is not true of all micro four thirds lenses. For such a lens that only covers MFT, you would get vignetting around the edges of the frame of a shot and would need to crop the image in post production to remove it. Internal cropping, which is available in some resolutions, would also help with avoiding vignetting issues: 4096x2160 @30fps max (4K DCI Low Noise) * 4096x2160 @75fps max (4K DCI) * 4096x1728 @100fps max (4K 2.4:1) 3840x2160 @30fps max (4K UHD Low Noise) * 3840x2160 @75fps max (4K UHD) * * supersampling / cropping selectable https://www.z-cam.com/e2-s6/

Q: 7. will there be a m4/3 mount or is the mount removable?

A: Not that we are aware of. This product will have EF and PL mounts only.

Q: 8. Can it take photos?

A: no you can not take still photos with this camera

Q: 9. Any B4 lens adapter or PL mount adapter?

A: The Zcam is an interchangeable mount system therefore instead of adapting the mount you would swap the mount. Here is the PL Mount for Z-Cam E2 Cameras Z CAM Interchangeable Lens Mount for E2 Flagship Series (PL Mount) B&H # ZCEM102 MFR # EM102 In regards to B4 that is a bit tricky. B4 Lenses are not designed to cover Super35mm sensors therefore it will create a vignette when used with this camera. the only way to avoid it is to crop in on the image. If you truly want to mount a B4 Lens on this camera you can use the MTF Services Ltd B4 2/3" to Canon EF Adapter B&H # MTB4CANEF MFR # MTB4CANEF

Q: 10. Does it crop in on the sensor in any of the slow motion modes?

A: According To Z Cam 4K 100/120fps is cropped, as is 6K 60fps. However 6K (2.4:1) at 60fps is not cropped.