The Dalite 87 x 116" Model C Manual Front Projection Screen is a perfect choice for either a large lecture or seminar hall, or conference/training room. The screen is designed for heavy use and features lubricated steel ball bearings for a smooth operating system. The screen is accessed via a pull cord.

As an option, you can purchase the screen in any one of seven veneer finishes to give it a more professional, finished appearance. If you prefer not to choose a veneer or laminate, the screen will come with a white casing. In addition, you can also purchase floating brackets which allow the screen to be either wall or ceiling mounted but which also give you the freedom to align the system left/right.

Wall or Ceiling Mounted / Non-Tensioned    150" Diagonal / Video Format    4:3 Aspect Ratio    Matte White HC Finish / Front Projection

Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications

Optional floating mounting brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Matte White fabric up to and including 10' high will be seamless

Glass Beaded fabric up to and including 8' high will be seamless

Video Spectra 1.5, High Contrast Matte White and Silver Matte fabrics available in sizes up to 8' high

Related Questions and Answers

Q: 1. is this speedlite compatible with olympus OMD EM1?

A: This Speedlite will work with Olympus OM-D E-M1 , only manual , no TTL ore high speed sync

Q: 2. Is this flash compatible with the sony a6000?

A: This model is not TTL so any camera will fire as long as it has a hot shoe but you will be shooting manually

Q: 3. Does this work well with a Nikon D-750 and is it easy to use?

A: Yongnuo YN560-IV Speedlite is a universal manual flash. You can attach this unit on the camera hot-shoe and control the flash exposure on manual. Yongnuo Speedlite only has a center pin that connects on your camera hot shoe. If you prefer a flash unit that's compatible with your camera and provide TTL service I will recommend BH #YOYN685N.

Q: 4. Can this be used on a Canon T5

A: Absolutely! In fact, the second set I purchased was cut into smaller shapes and distributed for use with flashes we have in the classroom. They work GREAT!

Q: 5. The a99 is listed as compatible, but the sensor cutout is on the top instead of the bottom. Is this a typo? Should the description list a99II instead?

A: I use it on a Sony a7S. It is invaluable for blockig out bright light (sunlight) in order to see clearly the camera's viewfinder. It is also very comfortable against the eye socket. The only downside is it blocks a little bit your view of the rear screen, but you can roll/hold it back to reveal fully the rear screen. This is a well-thought-product. Highly recommended.

Q: 6. Will this flash work as a slave in manual mode with a yne3-rx? I only need to set power remotely? I do not need TTL functions

A: No I don't believe so. It seems to be designed to work with several e-TTL Yongnuo flashes, but not the fully manual YN560-IV. I have the YN560-IV as well as it's predecessor the YN560-III. I trigger them with the YN560-TX and it works wonderfully. You can adjust the flash power and zoom of each flash separately without having to walk over to the flash. Just make sure to get the correct brand compatibility (Nikon/Canon). Another option is to set the flash to 'Slave' and use the pop up flash on your camera to trigger it.

Q: 7. Does the hss work with a Sony a7rii and xpro s?

A: Yes, this would work in HSS on the A7RII with the XPRO transmitter. Please reach out to our live video-chat department if you run into any issues and we can troubleshoot this with you. :)

Q: 8. Is this flash compatible with Pentax K-01?

A: Yes, it works with the K-5, which has the same setup/configuration.

Q: 9. Is there a standardized outer diameter for clamp on matte box adapters?

A: No, the clamp on matte boxes tend to cover a wide range of lens diameters via the included thread adapters so there isn't really a standardized size. The Meike 85mm T2.2 Manual Focus Cinema Lens (MFT Mount) have 77mm filter thread which should make it compatible with most clamp on matte boxes.

Q: 10. What are the dimensions of this lens?

A: TTArtisan 50mm f/1.4 Manual Focus Lens for Leica L dimensions are 70mm L x 57mm W. With the lens, caps attach the lens reaches 82mm L.