The 50' Datavideo CASDI50 Male to Male BNC Cable is a Belden BNC cable designed for use with standard definition and high-definition SDI equipment.

For SD and HD SDI Equipment

Related Questions and Answers

Q: 1. Can I set each input channel to 1080 or 720 separately?

A: The inputs on the Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle need to operate at the same video standard. So it can either be 1920 x 1080 or 1280 x 720.

Q: 2. Does the SE-1200 MU use cooling fans? If so, what is the noise level?

A: There is no mention of a fan or fan noise here or at Datavideo for the Datavideo SE-1200MU 6-Input Switcher and RMC-260 Controller Bundle.

Q: 3. its work with pal ntsc both ?

A: Hello,Yes, it supports 1080i or 720p at 50, 59.94, or 60 Hz. You just need to set it in the menu.Thanks!

Q: 4. How is the output recorded? To a external hard drive or is there a card slot for SD card?

A: This switcher does not have any recording capabilities built in to it. However it does have SDI and HDMI outputs which you can use with recording devices. Datavideo also offers the HRS-30 Portable Hand Carried SD/HD-SDI Recorder, B&H # DAHRS30. You could also look at products like the Atomos Shogun Flame, B&H # ATOMSHGFL2.https://bhpho.to/2yKDFNHhttps://bhpho.to/2Gyy7tw

Q: 5. If the RMC-260 controller is connected, will the software interface still work? Or, can you attach an XKeys keyboard to perform simple functions?

A: An XKeys Keyboard will not work with this product.

Q: 6. Hi. Does it do live titling too?

A: Luis:There are two ways you can bring in live graphics (lower-thirds). 1. Since SE-1200 does have chroma key and luma key, you can bring in a video source from you laptop and key in a graphic using a program such as PowerPoint or Word. 2. SE-1200 also has a DSK (or down stream keyer). Datavideo offers the TC-200 (I think around $700 on B&H site), which includes software for your PC laptop. This will allow you to bring in the video using on the downstream of your production. Upstream is also possible. Both solutions would require a laptop, but both are easy to set-up. Datavideo does have videos which will show you how to use the TC-200 at a href= http://www.datavideo.com target= _blank www.datavideo.com/aCraig

Q: 7. how do you control the cameras?

A: The included Datavideo HS-1600T MARK II switcher offers next generation design which features a built-in camera controller for up to 3 Datavideo PTZ cameras. (Works with PTC-140T and PTC-150TL)

Q: 8. Can you take the HDMI output of the SE-1200MU and capture it on a Mac using Final Cut software?

A: Yes, you can capture the HDMI output with a capture device connected to your Mac. A product example that interfaces with Final Cut Pro is Blackmagic Design UltraStudio Mini Recorder BH #BLUSMINIREC • MFR #BDLKULSDZMINREC. https://bhpho.to/2L9DOSS. This will connect to a Mac through thunderbolt. This does not come with a thunderbolt cable and if working with thunderbolt 3, you will need a Thunderbolt 3 to 2 adapter. Apple 1.6' (0.5 m) Thunderbolt Cable (White) BH #APMD862LLA • MFR #MD862LL/A. https://bhpho.to/2b1NWLi Apple Thunderbolt 3 Male to Thunderbolt 2 Female Adapter BH #APMMEL2AMA • MFR #MMEL2AM/A. https://bhpho.to/2Liu87p

Q: 9. Will the audio come through on the sdi inputs and be transmitted on the output sdi or do you have to have the use the audio mixer?

A: The SE-1200 MU can only accept external audio using the analogue XLR inputs on the rear panel.

Q: 10. Can this device output a program out 1080p over SDI? Can it output a 1080p pogram out over HDMI? Can the SDI outs be used for multiview and preview?

A: The Data Video SE-1200 MU supports these HD video signals: "1080i/50, 1080i/59.94, 1080i/60 and 720p/50, 720p/59.94, 720p/60" which can be output via HDMI or SDI. HDMI 1 and The SDI outputs can be configured for either program out, preview and multi view. HDMI 2 will always be a multiview.