The Dalite 146 x 260" Professional Electrol Motorized Projection Screen is a large screen suitable for venues such as auditoriums, and theaters. This is a rugged screen designed for heavy-duty use. The motor is inside the roller and is supplied with a quick reversal function. In addition, it features an automatic thermal overload cutoff to prevent accidental burn-outs. The braking system is designed to eliminate "coasting".

The handsome case is wood and coated with a black primer which can be finished as you see fit. The Professional Electrol includes a three-position Decora style wall switch or can also be controlled with Dalite's Video Projector Interface, Single Motor Low Voltage Controller as well as Dalite's many Integrated Screen Control products for more sophisticated control and networking.

Ceiling Recessed    Tensioned    298" Diagonal    HDTV Format    16:9 Aspect Ratio    DA-Mat Finish    Front Projection    120V, 60Hz

Dalite's largest enclosed electric screen

Perfect for venues where a recessed installation is not required or possible

Patented in-the-roller motor mounting system for quiet operation

Handsome black textured case blends with any decor

All fabrics are seamless

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Related Questions and Answers

Q: 1. Does the motor make enough noise to compromise audio for a testimonial interview?

A: If the only using the on-board mic of a camera, it may be an issue. However if the person giving a testimonial is properly mic'd it should not be any issue it at all.

Q: 2. Hi, Will this fit onto the Nikon 100-400 S lens ?

A: Kirk recommends the KLP-360-2NL for the Nikon 100-400mm Z mount lens. Please take a look at the following link: https://bhpho.to/477cUT5

Q: 3. is the Datavideo HDR-1 Standalone H.264 Recorder and Player an option for recording?

A: Yes, you can. I use the HDR-1 to record from the 1200MU. There are 2 HDMI outputs, one for Multi-View and one is assignable. You assign the second HDMI out to be Program and record both audio and video from there.

Q: 4. Will this switcher properly handle 1080p29.97 from cameras like the Panasonic AW-HE40 over SDI? I understand its a 1080i product, but isn't 29.97p sent over SDI like interlace?

A: Hi James, the SE-1200MU switcher cannot accept 1080p signals through SDI. It can accept 1080p 60 or 59.94 through HDMI input. Thanks!

Q: 5. I work alone recording myself. Can I set the movement to loop repeatedly while I am on camera with no one at the controls?

A: Yes, that will be possible with this product.

Q: 6. can i get the carrying case alone?

A: Unfortunately a product SKU for the case is not listed.

Q: 7. What is the weight capacity. Can it handle a Red?

A: Load-bearing: 11 pounds

Q: 8. Can you shorten the distance travelled, or does it always go to each end?

A: Yes, you can shorten the distance. It does not need to go all the way end to end.

Q: 9. Can this device output a program out 1080p over SDI? Can it output a 1080p pogram out over HDMI? Can the SDI outs be used for multiview and preview?

A: The Data Video SE-1200 MU supports these HD video signals: "1080i/50, 1080i/59.94, 1080i/60 and 720p/50, 720p/59.94, 720p/60" which can be output via HDMI or SDI. HDMI 1 and The SDI outputs can be configured for either program out, preview and multi view. HDMI 2 will always be a multiview.

Q: 10. I can use this unit combining digital sources (such as PC or professional cameras ) and analog sources ( such as old cameras , recorders , analog outputs of the GoPro cameras ) ?

A: The Datavideo SE-1200MU has 6 video inputs, four of them are HD-SDI and two are HDMI. Each input has frame sync so you can use a variety of different cameras and even a computer with an HDMI output can be added as a source. You will also be able to connect older analog gear to this unit, you will just need converters to change the signal to HD-SDI or HDMI. If you need further assistance with this product feel free to email us directly at provideo@bhphoto.com.