The Dalite 90 x 160" Advantage Electrol Projection Screen is a unique design. Construction of this ceiling recessed screen permits the case to be installed first and the fabric added later once a suitable projection surface is decided on. This is a big "plus" since companies constructing viewing rooms may not be certain of what they need in a screen. However, the Advantage permits the basic frame to be installed in the ceiling - ready for a finished fabric assembly to be added when all is prepped.

The exceptionally quiet motor gives it an edge over similarly priced screens. Quiet "up" and "down" operation makes the Advantage more professional in appearance as well as less distracting to your audience.

The Advantage Electrol has several options which make it a great choice for schools, lecture halls, libraries and corporate environments. Because it can be installed during the construction phase of your office, there is no pressure to buy a "finished" screen while budgets may still be on the table. The option of many remote controls also adds to its flexibility.

Ceiling Recessed    Tensioned    184" Diagonal    HDTV Format    16:9 Aspect Ratio    Dual Vision Finish    220V, 50Hz European Voltage    With Low Voltage Connector

Designed to have the case installed during the "rough-in" stages of construction and the fabric assembly during the finish stage

Handsome finished white aluminum case provides a clean look and allows easy installation of ceiling tiles

Standard with a Decora style three position wall switch

UL Plenum Rated case

Matte White fabric up to and including 10' high will be seamless; Glass Beaded fabric up to and including 8' high will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric are available in sizes up to 8' high; High Power fabric is available in sizes up to 9'x12' and will be seamless up to 6' high

Related Questions and Answers

Q: 1. Will this fit a Nikon Z8 with 24-70 f4 lens?

A: The camera compartment in the Lowepro Trekker Lite BP 250 AW Backpack (Black, 25.5L) is too small to fit the Nikon Z8 with an attached lens.

Q: 2. What is the weight capacity. Can it handle a Red?

A: Load-bearing: 11 pounds

Q: 3. I work alone recording myself. Can I set the movement to loop repeatedly while I am on camera with no one at the controls?

A: Yes, that will be possible with this product.

Q: 4. I will be using this with a spotting scope & wifi camera and will be at the weight limit. Will it hold up?

A: Being at the max payload capacity of the Bescor MP-101 Motorized Pan & Tilt Head with L-Series Battery Power Kit may present issues especially if the setup is not balanced. It is recommended to be under a max payload for best performance.

Q: 5. Would this tripod be a good selection for a spotting scope?

A: Yes, the Oben ALF-6193L Skysill Series 3-Section Aluminum Tripod with 90° Lateral Column and BE-117 Dual-Action Ball Head will be a good selection for a spotting scope.

Q: 6. does it come with a warranty?

A: Yes it does, this product includes a 90-Day Limited Warranty from Bescor. You will be able to add either a Square Trade 2 Year or 3 Year Extended Service Plan when checking out on our website to extend the warranty.

Q: 7. is this slider quiet enough for interviews?

A: That depends on your set up, the space that you are in, and your tolerance for noise. This Slider is relatively quiet yet some customers say that it is too loud for interviews. Others have attained excellent audio quality using much louder slider set ups. Here are a few tips for collecting good interview audio regardless of how loud/quiet your slider is. 1. Make sure there is some distance between the slider and your subject. The close the slider is to your subject the more likely you are to pick up the sound of the slider. 2. Make sure your microphones are closer to your subject than they are to the slider. It is generally a bad idea to mount a microphone on your camera if that camera is on a slider. this is because the slider motor will be much closer to your microphone than your subject and therefore the slider motor will be fairly loud regardless of how "silent" the motor is. It is also generally a good idea to get the microphone as close to your talent as possible whether you have a slider involved or not. 3. collect room tone with the slider on. tip 1 and 2 should limit or eliminate any slider noise from your audio but in case there isn't enough room to get sufficient distance between your subject and microphone from the slider capture some audio of the room in silence while the slider motor is running. this will help you create a noise print to eliminate the slider noise in post production.

Q: 8. Are any of the legs detachable for use as a monopod?

A: Unfortunately, the Oben Skysill ALF-6194L doesn't offer a detachable leg for use as a monopod.

Q: 9. Would this tripod be a good selection for a Vortex spotting scope?

A: The Oben ALF-6193L Skysill Series 3-Section Aluminum Tripod with 90° Lateral Column and BE-117 Dual-Action Ball Head is fine iwth a spotting scope. But most do prefer a fluid head. This is a few options, https://bhpho.to/3QdItox.

Q: 10. Can anyone tell me what the collapsed length for this? Trying to find a good tripod bag before I place my order.

A: The Sky-Watcher SolarQuest Motorized Alt-Azimuth Solar Telescope Mount is about 35 inches when collapsed so this Impact Light Kit Roller Bag #2 would be a good fit and provide protection: https://bhpho.to/3QEiV1P