The SR-1HG-3 Fiber Transmission System (Receiver) from Meridian Technologies supports one channel of SMPTE 292M, 310M, 259M, 344M and 424M compliant digital video one fiber. This model uses singlemode fiber. It is well-suited for use in remote broadcast camera links, sporting events, media feed, video production, and information displays, among many other possible applications and settings.

It supports the real-time transmission of video without compression. Reclocking supports retiming, reshaping, and regenerate functions. No user adjustments are required to use this device. The DigiView product family is available as rackmount cards and modules that can be installed in any Meridian's desk chassis or stand chassis, as well as in 3U, 19" racking frames.

Receiver    Singlemode Fiber    One Channel of SD/HD/3G-SDI    Real-Time Transmission

The card is designed to support one channel of multi-rate SDI, HD-SDI and 3G-SDI signals

This model uses singlemode fiber

It includes ST and FC fiber connectors

It features a built-in reclocker

This device supports real-time video transmission

Supports The Following Formats :

• 19.4Mbps (SMPTE 310M)
• 143 To 540Mbps SMPTE 259M/344M
• 1.485Gbps SMPTE 292M HDTV
• DVB-ASI at 270Mbps
• 2.97Gbps (3G) SMPTE 424M

It supports SMPTE 305M SDTI rates

This device offers error-free pathological pattern performance

It is a rackmount card unit

It supports embedded audio and metadata

Transmission distances up to 15.53 (25km) are possible with this device

LED indicators for are available for power, laser, reception, and transmission status

A wide dynamic range eliminates the need for optical attenuators

No user adjustments are required

CWDM lasers are available for 16 channel MUX over one fiber

Related Questions and Answers

Q: 1. can i power it of a v-mount battery through the barrel connector via d-tap?

A: Yes, of course.

Q: 2. will this support 24.97?

A: No, the FeelWorld W1000S 1000' SDI + Dual HDMI Wireless Video Transmission System (B&H# FEW1000S) is not capable of transmitting and maintaining the 24.97 frame rate at any resolution. However, that frame rate is most commonly used in countries where a 25 frames per second rate is also used, and that frame rate in particular (i.e. 25 frames per second) is supported. Of course, this information is true and accurate for the manufacturer’s announced specifications at the time of product release and could change in the future.

Q: 3. Does it do cross conversion? can I input SDI on the TX and HDMI on the RX? or vice versa?

A: Actually, I just tried it and seems like it does work.

Q: 4. Does this have any compression on it? And how much? Does this work with the blackmagic mixers?

A: Yes it does have compression. According to Hollyland their code rate is 8M-10M. For use with a production switcher you would want to look an uncompressed option like the Hollyland COSMO 600 Wireless HDMI/SDI Transmission System (L-Series) instead, BH #HOCOSMO600L.

Q: 5. Can this be powered externally? If so, how? USB, plug...?

A: The Hollyland Mars 400 Dual HDMI wireless set can be externally powered by its included DC Power Adapter or with an optional D-tap adapter (SKU: HOMARSDTAPDC). The USB is listed as use for firmware upgrades.

Q: 6. If I buy 3 sets of tx/rx is it possible to connect 3 receivers to one transmitter, or is it limited to two receivers per 1 transmitter?

A: This system is limited to two receivers per transmitter.

Q: 7. Is there a way to power both the transmitter and receiver via DTAP?

A: You will need to use a 12V D-Tap cable. This will allow you to power both the receiver and the transmitter.

Q: 8. Can this be powered by Panasonic Camcorder 7.2V batteries I use for powering my AG-UX90? Will the batteries fit?

A: Hi Pesi, No that's not fit. The Mars 400S can be power by: a) Sony NPF batteries b) use the DC 2.1 power adapter that comes along c) Use D-TAP to DC 2.1 Power cable to connect the Mars 400S to the V-mount batteries

Q: 9. Hi, There, Will this system work with ATEM and Sony MCX500 Switcher?

A: Yes it will. This has both HDMI and SDI outputs which you can use to connect the receiver to a production switcher.

Q: 10. Does the app have an anamorphic desqueeze view function? If not can this please be added?

A: Hi Daniel, the app does not have an anamorphic desqueeze view function. So far we don't have plan to add this feature. May I know why you need this feature? thank you.