The Dalite 50 x 67" Advantage Deluxe Electrol Front Projection Screen is designed to have the case installed during the "rough-in" stages of construction and the fabric assembly during the finish stage. Its handsome white powder coated closure doors and case provide a clean look and allow easy installation of ceiling tiles.

Wall or Ceiling Mountable    Tensioned    84" Diagonal    Video Format    4:3 Aspect Ratio    DA-Mat Finish    Front Projection    220V, 50Hz

Patented in-the-roller motor mounting system for quiet operation

As screen formats change with technology, fabric replacement is simple and inexpensive

UL Plenum Rated case

Matte White fabric up to and including 10' high will be seamless; Glass Beaded fabric up to and including 8' high will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric up to and including 8' high will be seamless; High Power fabric up to and including 6' high will be seamless

Related Questions and Answers

Q: 1. Would this lens work on a Canon EOS M with the EF-M 18-55mm f3.5-5.6 IS STM lens that comes with it? Is there a adapter?

A: The Canon EF-M 18-55mm f3.5-5.6 has a 52mm filter thread connection. Using the step-up ring below would allow you to mount and work with the SLR Magic Anamorphot-50 2.0x Anamorphic Adapter. Sensei PRO 52-62mm Aluminum Step-Up Ring BH #SESURPA5262

Q: 2. Wich focal lenght can be used with this adapter below 50mm focal lenght in full frame dslr .. Can i use it with 35mm focal lenght lens ? With 28mm ... Or better using with micro 4-3 sensor size ?

A: When using a full frame camera you can use focal lengths between 70-100mm. For both APS-C and MFT Cameras the range goes from 35-100mm.

Q: 3. Will this work on my Sony X70 Camcorder (it has a 62mm Front thread)?

A: While you may be able to physically connect the Anamorphic Adapter to the PXW-X70, we are not sure how well it would actually work. That is something you would need to test out to see the results. This adapter is a Returnable Item at this time.

Q: 4. Does it work with a Sony a 7 III and the Zeiss Batis 40mm?

A: We're afraid not. The diameter of the Batis 40mm is too large to properly work with this adapter, you need a lens with a front diameter that is at 50mm or below. The SLR Magic Cine II 50mm f/1.1 Lens (Sony E-Mount), B&H # SL5011FE2, is a great choice for this Anamorphot Adapter and the A7III. https://bhpho.to/2CXd0lW

Q: 5. Ive been trying to aling this, but the ring screw mechanism is terrible, any tips?

A: Absolutely agree. My only advice is be patient. Screw it very slowly and carefully. After some time, it seems to screw a little easier. Good luck.

Q: 6. will this work with the sayang cine lenses?

A: this adaptor will work fro any lens with a front thread under 62mm. because this adaptor has a rear thread of 62 it will not fit onto any lens with say a 77mm thread. its ok to go lower, say if the sayang lens has a 50mm front thread you can easily buy a step down ring to match them up.

Q: 7. Is this real anamorphic or fake Is it a blue coding and spiral opening to simulate anamorphic

A: This is an adapter that will allow you to get a real anamorphic effect with the proper lens and camera.

Q: 8. hello, I have a question I will buy a mitakon lens 35mm 0.95 a Rokinon 12mm T2.2 Cinema and a Rokinon 50mm f / 1.2 and I want to know if I can adapt the slr anamorphic adapter 40 0 50 to these lenses with a sony camera a6500?https://a href= http://www.bhphotovideo.com/c/product/1304887-REG/mitakon_zhongyi_mtk35m95m2sesi_speedmaster_35mm_f_0_95_mark.htmlhttps://www.bhphotovideo.com/c/product/1047000-REG/rokinon_cv12m_e_12mm_t_2_2_cine_lens.htmlhttps://www.bhphotovideo.com/c/product/1185693-REG/rokinon_rn50m_e_50mm_f_1_2_aps_c_w_a.html target= _blank www.bhphotovideo.com/c/product/1304887-REG/mitakon_zhongyi_mtk35m95m2sesi_speedmaster_35mm_f_0_95_mark.htmlhttps://www.bhphotovideo.com/c/product/1047000-REG/rokinon_cv12m_e_12mm_t_2_2_cine_lens.htmlhttps://www.bhphotovideo.com/c/product/1185693-REG/rokinon_rn50m_e_50mm_f_1_2_aps_c_w_a.html/a

A: The Anamorphot Adapters and the lenses they work with is a bit tricky. If you are looking to purchase lenses, your best bet is to get SLR Magic lenses designed specifically for this adapter. Their 35 and 50mm E-Mount options would be the way to go and will work with this adapter and the A6500.https://bhpho.to/2seebalhttps://bhpho.to/2liW7Y2

Q: 9. I would like to use this adapter with my Zeiss prime lenses, on a D810, with my 85mm and 100mm lenses. What is the best kind of step-down ring to use, since the thread sizes on my lenses are all larger than the recommended 58mm?

A: here's what can tell you...if the filter threads on your lens are larger than 62mm on a full frame sensor, it will vignette. i have a very special manual zoom lens that is so sharp, i don't really understand it. the threads are 72mm, and it vignettes so badly that in order to correct it the horizontal crop is almost 4:3. on super35, it's still no good. it is what it is. i really like this adapter. i have two (with the range finder-it's a must have). hope this helps.from their website, they suggest full frame sensors with 40-85mm lenses. in fact, for any sensor size, they recommend a max of 85mm. for fun, i put one on my old Canon XA10 and zoomed it to 200mm. it looked fine. i know it's a big purchase for most, so make sure you have lens specs that they suggest.

Q: 10. Would this work with the A7Siii and a Sony Zeiss 50mm?

A: Unfortunately, the SLR Magic Anamorphic Adapter mounts to lenses with 62mm front thread. The Sony Zeiss 50mm has a 72mm filter front.