The Dalite 78 x 139" Cosmopolitan Electrol Rear Projection Screen is a good, solid and reliable choice for school, business or even home use. This screen is a good choice when either your site, budget or demands do not require a permanently recessed installation. 

The built-in motor is quiet and offers reliable and smooth service. The tensioned version of this screen offers a guide cable that maintains even horizontal pressure to hold the surface flat while a custom slat bar with added weight maintains the vertical tension. Its handsome white case blends with any decor.

Dalite offers projection screens for all scenarios - business, education or social. Manual or electric, large or small, wall, ceiling or tripod style - Dalite has a style to suit everyone's needs.

Wall or Ceiling Mount    Tensioned    159" Diagonal    HDTV Format    16:9 Aspect Ratio    DA-Tex Finish    Rear Projection    With Low Voltage Controller    220V, 50Hz

Handsome white textured case blends with any decor

Standard with a Decora style three position wall switch

UL Listed

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

All fabrics are seamless

Related Questions and Answers

Q: 1. I don’t see a shutter cable for fugi xt4. Will it work and is there a cable?

A: As per manufacturer confirmation, the unit will work with a Fuji XT4 and a shutter cable that is compatible with the camera and is using standard shutter cable protocol should work

Q: 2. is this slider quiet enough for interviews?

A: That depends on your set up, the space that you are in, and your tolerance for noise. This Slider is relatively quiet yet some customers say that it is too loud for interviews. Others have attained excellent audio quality using much louder slider set ups. Here are a few tips for collecting good interview audio regardless of how loud/quiet your slider is. 1. Make sure there is some distance between the slider and your subject. The close the slider is to your subject the more likely you are to pick up the sound of the slider. 2. Make sure your microphones are closer to your subject than they are to the slider. It is generally a bad idea to mount a microphone on your camera if that camera is on a slider. this is because the slider motor will be much closer to your microphone than your subject and therefore the slider motor will be fairly loud regardless of how "silent" the motor is. It is also generally a good idea to get the microphone as close to your talent as possible whether you have a slider involved or not. 3. collect room tone with the slider on. tip 1 and 2 should limit or eliminate any slider noise from your audio but in case there isn't enough room to get sufficient distance between your subject and microphone from the slider capture some audio of the room in silence while the slider motor is running. this will help you create a noise print to eliminate the slider noise in post production.

Q: 3. Can this be hung upside down?

A: The GVM GT-120WD Wireless Bluetooth Carbon Fiber Motorized Camera Slider is not designed to be operated in upside-down mode.

Q: 4. What kind of AC adapter does this use? The AC adapter that charges the remote can work on the slider itself but it seems to be a very unique cable.

A: The AC power adapter is a standard, universal (120-240VAC), adapter with a sleeve connector. It is a type used on thousands of electrical devices. If you are outside the USA, just get a plug adapter to tie into the local electrical grid.

Q: 5. are the chargers 220V compatible?

A: yes this product will support 120/220v power

Q: 6. Can the GVM sliders control the shutter on an Olympus EM-5 Mark iii for time lapse videos?

A: Unfortunately, for the GVM GT-120WD Wireless Bluetooth Carbon Fiber Motorized Camera Slider (47-), GVM has not confirmed compatibility with Olympus EM-5 Mark III for communication for the time lapse function.

Q: 7. Does this really only hold 5.5 lbs? It seems like other models made by GVM can do 11lbs

A: Yes, the manufacturer states that the GVM GT-80WD supports up to 5.5 pounds for multi-angle usage.

Q: 8. Can the slider tracks be extended?

A: We are not aware of any way that this system can be extended.

Q: 9. I love how silent these motor are. But...How does this one compare to the older 2019 version? I got one of the first that still came with a silver control box. There was a LOT of play on the platform when doing parallax. Does this one do more precise video mode shots??

A: We are not getting any negative reports regarding GVM sliders.

Q: 10. How many seconds does it take for it to go from one side to another on the slowest setting and the fastest?

A: The amount of time it would take on the fastest speed is 39s , and on the slowest speed it would be 5min and 37s