The FSR CS-BMM-3Nickel BNC to BNC 3' (0.9 m) Cable is a 75 Ohm BNC to BNC cable designed for high quality digital video and audio transmission. The cable is 3' (0.9 m) in length and comes fitted with a high grade copper shielding to prevent interference.

3' (0.9 m)    Nickel Plated    Gold Pin    75 Ohm

Molded strain relief 75 ohm nickel plated BNC connectors with gold pins.

Flexible black molded strain relief connectors with jacket.

High grade copper braided shielding.

Manufactured from UL approved cable.

Related Questions and Answers

Q: 1. Does this lens have internal focus? i.e. Does it change shape, or do the filter threads move or rotate while zooming in and out? Or is it a more or less sealed unit? Not referring to weather sealing, because their is no mention of it in the description.

A: Hi Joseph, Focusing is internal. No change in shape when focusing. Filter threads do not move when focusing. Polarizing filter will stay in position, when you focus. Resolution on my 24MP Nikon d7100 in raw is outstanding, especially f5.6 - f8 range. Absolutely razor sharp. I don't believe it to be weather sealed, but the build quality is pretty good. Lens hood is a nice design, but isn't the tightest fit. It usually stays on OK, but it's a bit looser fit than most hoods. Overall, this is a very nice manual focus lens. George

Q: 2. Does the AE Chip work for focus confirmation on a Nikon D90?

A: Yes, focus confirmation will work with the D90.

Q: 3. anyone tried this lens with a gh4 + metabones m43 to EF mount?

A: We have used it in the SuperStore and it will be fully compatible with the GH4 and a Micro Four Thirds to Canon EF adapter. The lens does not autofocus so it would be a manual focus lens regardless of the adapter.

Q: 4. can I use B+W 77mm 3.0 ND 110 Filter on this lens?

A: The lens takes standard 77mm threaded filters. Since it is a wide angle lens (on APS-C it's the equivalent field of view of a 24mm lens on full frame) you do need to use filters that don't have thick frames in order to avoid vignetting. I normally use the lens with a Hoya Pro-1 UV filter on it. That filter has a frame that's 4mm thick, and I don't have any problems with vignetting. I have not tried it with a filter with a thicker frame.

Q: 5. The dimensions on this lens are very large and long. Will this need a lens support to prevent strain on the MFT mount?

A: No, the Samyang 16mm f/2.0 ED AS UMC CS Lens for Micro Four Thirds Mount does not require lens support for use on cameras using the Micro Four Thirds lens mount.

Q: 6. Is this autofocus (on Sony A6000) or manual?

A: It's a manual focus lens.

Q: 7. Does the lens provide electronic communication with the camera?

A: Yes, the Voigtlander Nokton 35mm f/0.9 Lens (FUJIFILM X) has contacts for electronic communication. Note, the lens is manual focus and does not support autofocus.

Q: 8. Specs say that it has EF mount, but it also says it's designed for APS-C sensor cameras... This doesn't make sense to me. My concern is that I have an APS-C sensor camera now, but I'm planning to upgrade to a full frame camera in the near future. Will this lens work in a full frame camera?

A: All third-party lens manufacturers who design lenses for Canon DSLR cameras use the Canon EF lens mount which uses the red dot on the lens mount, regardless if the lens is designed for a camera that uses a full-frame sensor or a camera that uses the APS-C sensor. However, a lens designed for the Canon APS-C sensor should not be used on their full-frame cameras, regardless if the lens will physically fit. As such, while the Samyang 10mm f/2.8 ED AS NCS CS Lens uses the Canon EF Mount, it should not be used on a Canon full-frame camera. If you are looking for a lens to use on both full-frame and APS-C sensor cameras, then I would instead recommend the Samyang 14mm Ultra Wide-Angle f/2.8 IF ED UMC Lens for Canon EF Mount, B&H # SA1428C, for your needs.

Q: 9. Will this mount direct to an Olympus EM 10?

A: Yes, this lens will mount directly to an Olympus EM10.

Q: 10. Will this lens work on a Canon 60D? Unsure of what the M Mount is.

A: No. This lens will not work, as it is specified for Canon's mirrorless system. This would be better for the EF mount 60D:Samyang 14mm Ultra Wide-Angle f/2.8 IF ED UMC Lens for Canon EF MountB&H # SA1428C Mfr # SY14M-C