This SLR-3 DSLR Camera Case in blue from Porta Brace is designed to carry and protect a pro digital SLR camera with attached zoom lens, two additional lenses, and accessories. The case is made from water-resistant 1000-denier Cordura nylon. The interior walls are reinforced with corrugated polypropylene shells and 1" gray, 2 lb density foam. Slip-Not anti-skid material adds an extra layer of protection against water, dirt, and grime. The exterior bottom has an easy wipe-off surface. Removable, bendable dividers and an adjustable tie-down strap secures your camera in place.

The case has two large exterior pockets, one mesh and one zippered. The zippered pocket has two slip pockets on the outside and three on the inside. There are also two side pockets and four mesh pockets within the lid. It can be carried by its suede-covered handles or the removable, adjustable shoulder strap with suede-covered pad.

This case is made in Vermont, USA.

Holds a Pro DSLR Camera & 3 Lens Kit    1000D Cordura Nylon Exterior    Corrugated Polypropylene Walls    1" Gray Foam Interior    15 Exterior & Interior Pockets    Suede-Covered Handles    Removable Suede Shoulder Strap    Made in Vermont USA

• Water-resistant 1000-denier Cordura nylon
• Interior walls are reinforced with corrugated polypropylene shells
• Gray foam interior is 1" with 2 lb of density
• Slip-Not anti-skid material adds extra layer of protection against water, dirt, and grime
• Exterior bottom has easy wipe-off surface
• Removable bendable dividers
• Adjustable tie-down strap secures the camera in place
• YKK self-healing zipper with zipper guard

• Exterior large mesh pocket
• Exterior large zipper pocket with two exterior slip pockets and three interior slip pockets
• Two side pockets with mesh pockets
• Inside lid contains four mesh pockets

• Suede-covered handles
• Removable adjustable shoulder-strap with suede-covered pad

• Canon EOS 10D, 20D, 300D, 30D, 40D, 50D, 5D, 7D or Mark IV digital SLR camera
• Nikon D1, D100, D2, D200, D3, D300, D70 or D700 digital SLR camera
• Similar-sized select pro digital cameras with lenses and accessories

Related Questions and Answers

Q: 1. is this the first version or the second version? i heard the 2nd version is sharper and less coatings

A: this is the current version of the product from the manufacturer

Q: 2. Will it work with the Olympus M.Zuiko Digital ED 12-40mm f/2.8 PRO Lens?

A: While the filter threading will be compatible, zoom lenses like this are not good options for this lens. The wider focal ranges will not work with the lens. We do not recommend this adapter with that lens. A better choice would be to get one of SLR Magic's Cine Lenses, such as the 35mm T1.4 Mark II Lens for MFT, B&H # SL3514LMFT. https://bhpho.to/2bYmRJZ

Q: 3. Does this create a light-tight seal between the lens and the mattebox?

A: This does have a fairly large opening in it to control the focus on one of the lenses it is designed for, such as the B&H # SLRAC502XMFT. It may not be light proof, however it will give you a strong connection to clamp a Matte Box to.

Q: 4. Sorry, where's T11 at in this photo? Is the manufacturer just omitting a measurement on this one?

A: This lens does not have a marking for T11 on the body.

Q: 5. My set up is Gh5/sigma 18-35mm,and can I pair it canon 50m f1.4 too? Need advice thank you in advance.

A: The Sigma 18-35mm has a 72mm filter thread. It may be possible to use the Anamorphot with an step -down adapter, but it is not recommended as it may vignette. However, the Canon 50mm F1.4 does have a 58mm Filter Thread. You will be able to use it with the Anamorphot and a 58-62mm Step-Up Adapter, B&H # SESUR5862.https://bhpho.to/2fiv9R1

Q: 6. Hi, Just want to know if its the same glass used in the SLR Magic Cine 75mm f/1.4 FE Lens for Sony E-Mount? Whats the difference between the two apart from the obvious?

A: The new MicroPrime Cine lenses from SLR Magic build upon the original Full Frame E-Mount lenses SLR Magic Offers. The difference is the MicroPrimes are uniform in size with things like their gear placement and front diameter, so a kit of lenses can easily be switched on to a rig. They also have a better throw distance for focus and a more robust overall design.

Q: 7. Hello there. Is it possible to use this adapter on medium format cameras? The camera I want to use with fujifilm gfx100.

A: You will not be able to use this with a Medium Format camera.

Q: 8. I got a Canon T2i (APS-C) and a Sigma 30mm prime and Canon 50mm prime. Will this work on any/or both of those two lenses?

A: SLR Magic recommends that with the Anamorphot-50 1.33x Anamorphic Adapter that you use lenses in the 35-85mm focal length. So probably the 30mm will vignette and not be optimal.

Q: 9. Can I go PL to original BMPCC?

A: Yes, the SLR Magic PL to MFT-Mount Adapter will fit the original BMPCC, since the BMPCC has a Micro Four Thirds mount.

Q: 10. Does the threaded front rotate as focus is rotated?

A: The entire front of this unit rotates when you rotate the focus. The threaded front will rotate as well.