The JS-KD50 from Ultimate Support is a professional quality short mic stand. Ideal for miking sound sources near the floor, such as kick drums and amps, the stand features a heavy-duty weighted base for terrific stability. The fixed-length boom allows you to precisely position the mic. The stand is height adjustable, and has a scratch-resistant finish.

Weighted Base    Fixed-Length Boom    Adjustable Height    Scratch-Resistant Finish

Heavy-duty weighted base

Fixed-length mic boom

Adjustable height

Scratch-resistant finish

Related Questions and Answers

Q: 1. Is there any means to level this tripod to use it on unlevel surfaces?

A: To stabilize the ProAm USA Stand Support for DVC210, DVC200, DVC60, and DVC50 Camera Cranes on un-even surfaces, you can use a levelling head. It will be important that your choice can handle the payload.

Q: 2. What is the smallest length of lens this support will work with?

A: You can reverse the sliding support arm and adjust it to touch the base of the camera if needed

Q: 3. Is that lens support work with Nikon p1000 also I use Benro 5-section tripod with NOO ballhead

A: That strap will not work with a P1000.

Q: 4. What is the smallest footprint when the legs are spread out?

A: The diameter of the CM-1473's footprint with the support legs fully spread is 37".

Q: 5. Will this fit a Sony a7r IV with a Sony FE 24-240mm lens?

A: Hi--that lens is too short to fit this support--the minimum length is 7.9" and the 24-240mm lens is only 4.67" long.

Q: 6. Can I put wheels on it?

A: If you have the ability to build a base with wheels that it could sit in, possibly. If you have access to specialized casters/wheels maybe so. I think it would be a custom build if you did.

Q: 7. how does this adjust for height? or is it only for the Zacuto rig?

A: Because the Zacuto Lens Support for Canon 18-80mm Zoom Lens has a tilting access built in, it can be moved forwarded or backward along a 15mm rod to provided some minimal height adjustment to the setup. The Zacuto Lens Support for Canon 18-80mm Zoom Lens will work on other non-Zacuto rigs.

Q: 8. What is the shortest distance between the 1/4 inch threaded attachment to the front lens support?

A: There are 3 1/4 inch and 3 3/8 inch threaded attachment positions. The front lens support can be positioned directly over each of them. The front lens support is on a sliding arm that can be reversed to shorten the distance from the camera base.

Q: 9. Will this fit a Sony A300 DSLR?

A: Yes, the Manfrotto 293 will fit the Sony A300.

Q: 10. Will this fit the old Nikon 180mm ED, AI lens (non autofocus)?

A: No issue with the Nikon 180mm ED, it will fit well similarly with the 70 200mm f2.8