The PGA57-XLR from Shure is a professional-quality cardioid dynamic instrument microphone with an updated industrial design that features a black metallic finish and grille. It can be used to capture audio in several environments for applications such as guitars, acoustic drums, amplifiers, and more.

The PGA57-XLR has an unobtrusive visual presence and is built rugged to ensure exceptional performance in rigorous environments. In addition, a swivel adapter, a 15' XLR cable, and a carrying pouch are included.

Dynamic Element Microphone    For Instrument Capture    For Guitars & Sound Reinforcement    Cardioid Polar Pattern    3-Pin XLR Output Connector    Rugged Design    Internal Shock Mounting    Includes a Stand Adapter    Zipper Pouch for Storage and Transport    15' 3-Pin XLR Cable Included

Tailored microphone cartridge design for clear reproduction of sound source

Cardioid polar pattern picks up audio from the source while rejecting unwanted noise

Updated industrial design with black metallic finish and grille for unobtrusive visual presence

Stand adapter for mounting to a microphone stand

Zipper pouch included for additional protection during storage or transport

Shure quality design and construction for professional performance in rigorous environments

Related Questions and Answers

Q: 1. what type of amp is best for this mic and harmonica?

A: Many harmonica players like to use a microphone through a small combo amplifier designed for guitar to achieve a tone with a little more grit and dirtier tone than a standard PA speaker. Perhaps something like the Blackstar Debut 15E Stereo 15W Practice Guitar Amplifier (B&H # BLDEBUT15EBG) or the Roland CUBE-10GX Guitar Amplifier (B&H # ROCUBE10GX), or the VOX Valvetronix VT20X Hybrid Modeling 1x8 Combo Guitar Amplifier (B&H # VOVT20X).

Q: 2. How long is the flexible gooseneck ?

A: The Flexible gooseneck is about 3.3 inches in height.

Q: 3. Hi, what are the dimensions of the box that this comes in? Thanks

A: Hi, the Box Dimensions would be as follows 20 x 16 x 14.

Q: 4. Does it come with the standard three pin xlr connector or is it a mini xlr connector with an adaptor plug?

A: The Beta-98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection).If you are looking for a Beta98H/C to use with a wireless transmitter you should look at the WB98H/C. The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector.

Q: 5. What adapter or cable can I use to connect this to a regular 3 pin XLR cable? Thanks

A: This PGA98H-TQG model is wired for connection to a Shure wireless transmitter. Although there is an adapter available, for XLR connection with phantom power, it will usually not be the most cost effective option: (https://www.bhphotovideo.com/c/product/619325-REG/Voice_Technologies_VT0137_VT1126_48V_Phantom_Power.html). Instead, I would recommend purchasing the version of this mic that is already made for a hardwired XLR connection. Our part number for it is SHPGA98HXLR and I am linking it below: https://www.bhphotovideo.com/c/product/1128561-REG/shure_pga98h_xlr_pga_98h_clip_on_cardioid.html

Q: 6. Does this have a mute and on/off button ?

A: Yes, the Shure PGA48 Dynamic Vocal Microphone has an "On/Off" switch.

Q: 7. Does it need phanton power to work?

A: No, phantom power is not needed for dynamic microphones like the Shure 55SH.

Q: 8. Does this mic have phantom power sensing? Can I plug it into a deck with active phantom power (via XLR)?

A: This is a dynamic microphone which does not require phantom power to operate. Plugging it into a mixer, speaker or other device that has phantom power engaged will neither enhance its performance nor damage it.

Q: 9. does this need another accessory?

A: This microphone includes a compatible cable. So it is ready to plug directly into an amplifier, etc.

Q: 10. Can I connect this to a computer? Is it good for recording audio tutorials? I need something simple and affordable.

A: Yes, I am very satisfied with mine.