The Dalite 177 x 236" Professional Electrol Motorized Projection Screen can be used in large venues such as stage presentations and auditoriums. It can be installed for either an exposed or recessed application (without the doors traditionally associated with a recessed screen).

The screen comes oiled-for-life  and features an automatic thermal cutoff to prevent burnouts. The braking system is designed to stop the screen in either the "up" or "down" position and prevents "drifting" or "coasting". It includes a three-position Decora style wall switch.

The Professional Electrol can be controlled with Dalite's Video Projector Interface, Single Motor Low Voltage Controller, or Dalite's line of Integrated Screen Control products for more sophisticated control and networking.

Ceiling Recessed    Non-Tensioned    295" Diagonal    Video Format    4:3 Aspect Ratio    Matte White Finish    Front Projection    220V, 50Hz

Ideal for applications where a recessed installation is not desired or feasible

Patented in-the-roller motor mounting system for quiet operation

Handsome black textured case blends with any decor

All fabrics are seamless

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

UL Listed

Related Questions and Answers

Q: 1. Will this rig work with a 5D MKIII with a 70-200 L series lens? Do I have to purchase longer rods?

A: HiDepending on how you configure it, you might need longer rods. But it is as easy as getting LanParte's rod extension screws and go for your preferred length. But keep in mind tele lenses like 70-200 will need a tele lens support LanParte TS-02.

Q: 2. Is there an adaptor available to use this para with Profoto strobes?

A: There is an adapter for Profoto heads called the Bron Kobold Profoto Head Adapter for Para 88, 133, 177, 222. Please see the link below for reference.

Q: 3. Is the VCT-14 plate included in this kit?

A: No it does not come with VCT-14 plate.

Q: 4. Is there an adapter available to use this reflector with Photogenic Solairs?

A: Unfortunately, there are no adapters available for the Photogenic Solair to the Broncolor Para 177.

Q: 5. Can you get a dummy battery for a GH5 for this kit?

A: Here you go: Lanparte BLF19P-01 DC Battery Dummy Pack B&H # LABLF19P01. The GH4 and the GH5 use the same battery.

Q: 6. What is a good tripod for this rigs weight?

A: The weight of this Landparte rig as shown is 15 lbs/6.8 kg. Plus a camera would add about 6 lbs/ 2.7 kg for a total of 21 lbs /9.5 kg. However, Landparte shows their rig on a discontinued Manfrotto 701 fluid head that only has a capacity of 9.7 lbs/4.4 kg. Therefore I have to suggest a more robust tripod, the Benro BV10 Twin Leg Aluminum Tripod Kit being one example. It is at the affordable end of 22 lbs/10 kg tripods.

Q: 7. Could this work with the LS300? If so what cable would I need to get this to work with the battery?

A: I am sure it could be made to work. You would need a cable with barrel connectors on both ends. Unfortunately, at this time there is no known cable available for the LanParte VBP-01 Sony V-Mount Battery Pinch to connect to the JVC GY-LS300. I could not find one with either LanParte or JVC. I would then have to recommend that you get a technician experienced in making such cables to create a custom one for you. Camera rental houses often have people who can do this for a fee.

Q: 8. Would this rig work with a Blackmagic Ursa Mini?

A: The Lanparte Professional DSLR Kit V1 is for a DSLR camera therefore I believe it would not work.At this time, there is no rig specifically for the URSA Mini since it is so new it is not out yet. I would look for offerings by Lanparte, Wooden Camera, Zacuto and SHAPE.Attached is a basic rig that would get you started.

Q: 9. Is it possible this DSLR Rig to be used together with Sony a7s camera + FE PZ 28-135 F4 G OSS lens? The total length of the camera with the lens is 8 (211 mm). If not compatible, can I use this kit after replacing the rods with longer ones or should I be looking for other options of Lanparte V2 and V2B?

A: PK-01 is fine, but PK-02 is a lot better, either way you can rest assured cause LanParte's got you covered! You will need longer rods and a Lanparte Tele-Lens Support (TS-02) for the 28-135 F4 lens. Our rods have a variety of length ranging from 100mm-450mm. The rods on PK-01 are 300mm just purchase our rod extension screws (LPT-V2-059) you can just buy 100mm rods to make your rods 400mm in length. Or simply get 365mm rods. Don't worry about matte box vignetting since it only occurs on PK-01 at wider than 16mm.

Q: 10. Does this rid fit the A7S Sony?

A: Will the battery pack power a A7S camera?