The Dalite 8'6" x 14'4" Fast-Fold Truss Complete Screen Kit is a terrific screen to use when you are doing a point-of-purchase, location or non-permanent installation presentation. If you travel, this screen can save the day. It features folding 6" truss frame legs that are heavy duty. Fast-Folds are available in many sizes to accommodate your needs.

The legs are made from anodized aluminum and are etched and free from burrs. They are held together with piano hinges and assemble using "Speedy Cranks" to facilitate setup and and breakdown. All legs and frame are welded and made from rigid 1" aluminum . No other tools are required. All components fit into the included durable, wheeled carrying case for convenient transport and storage.

Front and rear projection screen surfaces can be interchanged at any time. The screen can be adjusted up or down in 6" increments. Includes rugged polyethylene carrying cases.

The tab-tensioning feature assures a flat, undistorted image. The back of the screen is designed with additional bracing to promote an even flatness to the screen surface. When this is achieved, the projected image appears more professional leaving less room for your audience to be distracted by a potentially skewed image.

Dual Vision Finish    Tensioned    Front or Rear Projection    Portable - Wheeled Carry Case    Easy to Set Up    Parts Joined with Piano Hinge    Uses Speedy Cranks for Setup    Steel Hardware is Plated    Durable Aluminum Construction    No Tools Required

All components fit into durable carrying cases for convenient transport and storage

No special tools required for setup

Airline transportable

All surfaces up to and including 12' high will be seamless

Available with DA-Mat, DA-Tex, High Contrast Da-Tex), Cinema Vision, Pearlescent, Dual Vision and Ultra Wide Angle (Rear) viewing surfaces

Related Questions and Answers

Q: 1. updated shipping date? plan to purchase it the 1st day its released.

A: Hi Mako S,We do not have the exact shipping date. If you would like to purchase one the day it is released we highly recommend placing a preorder. We only take a credit authorization and will only charge your card when the camera ships. Preordering puts you in line. If you wait you may miss out on the first shipment if we have more preorders than inventory.Thanks!-Erin

Q: 2. Would the 16x9 Inc. 169-HDWC8X-72 EXII 0.8x Wide Angle Converter be better than the Zunow 80? If so, is the adapter ring 62mm to 72mm?

A: The PXW-Z90V has a 62mm filter thread. To use B&H # 169HDWC8X72 on it you will need a 62-72mm Step-Up Ring, B&H # GBSUR6272. Once you have that adapter the lens should work well with the Z90. However the Zunow WCX-80, B&H # ZUWCX80, includes the needed adapter for the Z90 and is a full zoom through lens. It is also a good choice for this camcorder. Also, the 16x9 options is a special order item that takes 2-4 weeks to ship and it non-returnable. The Zunow is in stock and returnable if you are not happy with it.https://bhpho.to/2jcgh8Qhttps://bhpho.to/2AGu8bEhttps://bhpho.to/2nGiSsS

Q: 3. What codec and resolution is available at the 960fps mentioned in the Product Highlights?

A: What we know at this time is the 960 Super Slo Motion is that it is SD or Standard Definition. In NTSC in is 960FPS and in PAL it is 1000FPS.

Q: 4. Can I use the Sony NP-FV100a battery or is it too tall to fit under the viewfinder?

A: Hello. Yes the NP-FV100A is compatible with the PXW-Z90.

Q: 5. Isn't it a simple firmware update for XVAC to have XVAC S. If it can do L, and being that S is "inferior" and I'm assuming a software thing. Do you think Sony may do that? I want the Z90 for the broadcast quality but I love the versatility of mp4. I know the NX80 has it but I want 10 bit.

A: We are not aware of any plans by Sony to offer a firmware update for the NX80 that will allow it to record XAVC-L.

Q: 6. What are the components of this kit? What is the weight when full assembled?

A: The kit itself when fully assembled (including V mount battery) weighs 14 lbs. Adding a GH4 on top of that gives you around 15.5 lbs, it is a very light weight complete rig that basically comes with everything you'll need to get started.Here's a list of components in it.1. Mirrorless camera cage x1 (MCK-01)2. Compact Matte Box x1 (MB-01)3. Arri Rosette Handle x1 (UG-03)3. Follow Focus x1 (FF-02)4. Follow Focus Gear Ring x1 (FFGR-02)5. V-mount Shoulder Pad x1 (VMS-01)6. 95wh V-mount Battery x1 (VB-95)7. V-mount Battery Pinch x1 (VBP-01)8. ABS Safety Case x1 (ASC-02)

Q: 7. I am not seeing any video from my view finder?

A: If the display does not switch properly from the LCD screen to the Electronic Viewfinder (EVF) when the FINDER/MONITOR setting is set to Auto, look into the Electronic Viewfinder from straight ahead to help the display switch. Otherwise, change the FINDER/MONITOR setting to Viewfinder by following the steps below. 1. On the camera, press the MENU button. 2. Select Custom Settings. 3. Select FINDER/MONITOR. 4. Select Viewfinder. Setting the FINDER/MONITOR setting to Viewfinder switches the display between the Electronic Viewfinder and the LCD screen by pushing up or down the pop-up finder. When the viewfinder is up and the monitor is open, e.g. for low angle shooting, and the FINDER/MONITOR is set to Auto, the image is displayed on the screen only.

Q: 8. What size are the filter trays and how many of them are there?

A: Included in this kit is the Landparte MB-01 Matte Box which has two rotating 4 x 4 Filter Stages. Lanparte MB-01 4x4 Rod-Mounted DSLR Swing-Away Matte Box B&H # LAMB01

Q: 9. The specs list a composite output. Can the composite and HDMI or SDI output at the same time?I want to run SDI or HDMI to a mixer while running composite to a 7 inch LCD monitor.

A: All connections output according to the manual.

Q: 10. Can I record an external mic on one channel and the internal mic (natural sound) on the other channel?

A: I have not yet found a way to do this. You can select which mic to use in the menu, but it seems to be all or nothing.