The ST-1W2A-3 Fiber Transmission System (Transmitter) from Meridian Technologies incorporates an all-digital encoding technology that transmits one real-time, simplex 10-bit video channel and two, 24-bit audio channels in one direction over one optical fiber. This model uses singlemode fiber. It is well suited for use in intelligent transportation systems, security & surveillance work, access control, among many other applications and settings.

NTSC, PAL and SECAM video formats are seamlessly supported. It uses 3-pin terminal blocks for audio channel interfaces. The SC series is also compatible with Meridian's SpectraSmart Network management and diagnostic PC-based system.

The DigiSlim product family is available as rack mount cards and modules that can be installed in any of Meridian's desk chassis or in 19" racking frames. This system can be configured in either star (module to rack) or trunking (rack to rack) configurations. These systems can be transformed in to a standalone module by using SR-500/S (standard configuration) or SR-1000/S frames.

Transmitter    Singlemode Fiber    NTSC, PAL, SECAM    Audio & Video    Hot-Swappable    Real-Time Transmission

This model is a laser-based system that uses singlemode fiber

This model uses ST or FC fiber connectors

It features 10-bit native digital encoding

This system supports real-time video and audio transmission

It offers 7MHz of bandwidth

The card supports NTSC, PAL, and SECAM standards

A wide optical dynamic range eliminates the need for optical attenuators

This solution is designed to be reliable and repeatable

Local LED indicators provide visual cues for system status

System diagnostics are available for performance parameters

The card is hot-swappable

The laser features biased photo-detector circuitry for stable optical output over the full temperature range

The video connector is a 75 Ohm BNC with gold-center pin

It conforms with EIA RS-170 and RS-343A formats

Screw terminals are available for audio

Related Questions and Answers

Q: 1. Is this head compatible with a Canon 6D?

A: Yes, you can use this tripod head with a Canon 6D.

Q: 2. Does the head have levels

A: Yes, there are 3 levels on the side of the pase & the tripod has a level on the rotating collar attached to the top of the shaft. Love this tripod, highly recommended.

Q: 3. Will this connect with yongnuo yn-560 vl?

A: It does not use the same frequencies. You would need a receiver to use it with a YN560.

Q: 4. is this compatible with my d-lite rx4 purchased from another country?

A: Yes it is fully compatible with your light.

Q: 5. Does anyone know where I can buy a replacement set of rubber feet for my 190CXPRO4 tripod? I couldn't find them on the B&H site.

A: Please find the rubber feet replacement set for the Manfrotto 190CXPRO4 tripod here: http://bhpho.to/1mSYGft

Q: 6. Is it capable to convert from hdmi to sdi or the other way around? Does it have a option to scale up or down signal?

A: The FeelWorld Wireless Transmission System cannot convert HDMI to SDI or vice versa. It doesn't support up or down scaling. It can only transmit 1080p video using HDMI or SDI.

Q: 7. will this support 24.97?

A: No, the FeelWorld W1000S 1000' SDI + Dual HDMI Wireless Video Transmission System (B&H# FEW1000S) is not capable of transmitting and maintaining the 24.97 frame rate at any resolution. However, that frame rate is most commonly used in countries where a 25 frames per second rate is also used, and that frame rate in particular (i.e. 25 frames per second) is supported. Of course, this information is true and accurate for the manufacturer’s announced specifications at the time of product release and could change in the future.

Q: 8. Will the Elinchrom EL-Skyport Transmitter Pro work with my Leica M7 and M9 I don't need to used the Hi-Sync mode? I am considering switching from my Profoto B1 gear to Elinchrom.

A: You can use Elinchrom EL-Skyport Transmitter Plus BH #ELSTP with your Leica camera

Q: 9. Manfrotto MT190CXPRO4 is it still made in Italy?

A: Yes, it is.

Q: 10. If I use HDMI-IN with the transmisor and then SDI-OUT with the receiver will it work?

A: The FeelWorld W1000S 1000' SDI + Dual HDMI Wireless Video Transmission System (B&H# FEW1000S) will allow for either HDMI OUT or SDI OUT from the receiver to be used whether the source inputted to the transmitter is HDMI or SDI.