The ikan 15mm Right Angle Rod Adapter is a mounting block that slides onto any industry-standard 15mm support rod. It is specifically designed to mount the Cheese Stick Jr. onto the 15mm rod for attaching additional accessories, such as mixers, batteries, or lights, to an Elements support rig.

Universal Fit for Any 15mm Rods    Works w/Cheese Stick Jr.

Universal fit for any 15mm rods, allowing you to mount additional gear off of the rods from a right angle

Powder-coated black

Machined aluminum

Completely modular

Related Questions and Answers

Q: 1. do you need the added plate to use the sony FE 24-70 with the A7rii?

A: There is no added plate. Being that the lens is so large and heavy, you will have to set the camera back on the gimbal as far as possible or balance. You most likely will experience limited mobility.

Q: 2. In description - Load Capacity is from 2 to 4.5lb (0.9-2 kg).If my camera is more easier than 0.9 kg - does it mean that it will not work correctly with this gimbal or do I need a heavier camera? Is it gimbal was siutble for exaple for Panasonic HC-VX870 or HC-V760?

A: Sorry, this type of gimbal can only work with DSLR or mirrorless type cameras. They cannot accept the form factor of a camcorder.

Q: 3. Can the aperture of this lens be controlled by the BlackMagic Pocket Cinema 6K camera?

A: Although the Black Magic Pocket Cinema 6K Camera with a Canon EF can accept this lens, it has not been tested to our knowledge. Your results may vary.

Q: 4. Will it work with a Sony A7RII and Sony GM 24-70 2.8 lens?

A: The EC1 can handle this combination. Being that the lens is so large, the operator will need to mount the quick release plate forward (underneath the lens) to be closer to the camera/lens center of gravity. Also, being that its such a long set up the operator may experience a limited range of mobility, but I cant confirm this.

Q: 5. I'm trying to balance my A7r2 with the grip extension on a EC-1 but it becomes too top heavy. The weight is only 3 lbs. which the Beholder claims it can carry. But there's no way to lower the plate to accommodate the weight. Has anyone run into this problem and have any solutions?

A: Adding accessories will adversely affect balance. They will likely have to remove the handles when it is on the EC1 as the unit will have trouble trying to compensate for the offset of weight even if it is technically under the max capacity. It is just too much weight off from center.

Q: 6. Does this lens couple with Leica Rangefinder?

A: Yes this is Leica M-Mount Lens

Q: 7. suports bmpcc + zuiko 12mm f2?

A: The Blackmagic Design Pocket Cinema Camera and the Olympus M.Zuiko Digital ED 12mm f/2.0 Lens together weigh 17 oz. The ikan EC1 Beholder 3-Axis Handheld Gimbal Stabilizer needs a camera/lens of at least 2 lbs to function. So you need to select another gimbal. You might consider this one which is good for this camera's weight. ikan MS-PRO Beholder 3-Axis Gimbal Stabilizer for Mirrorless Cameras B&H # IKMSPRO.

Q: 8. Hello! Does this cage support the GH4 with the YAGH Interface?

A: No not at all. It's a nice cage but you won't be able to use the interface or the battery grip.

Q: 9. Will this be suitable for a canon 70d?

A: Yes it is. The Ikan EC1 has a load capacity of 4.5 pounds and is designed for DSLR cameras. This will be a good choice for a Canon 70d.

Q: 10. I assume this works with all canon DSLRs (6si)?

A: It can carry a camera that weight up to 2kg.(4 pounds)