The Dalite 18 x 24' Advantage Electrol Projection Screen is a unique design. Construction of this ceiling recessed screen permits the case to be installed first and the fabric added later once a suitable projection surface is decided on. This is a big "plus" since companies constructing viewing rooms may not be certain of what they need in a screen. However, the Advantage permits the basic frame to be installed in the ceiling - ready for a finished fabric assembly to be added when all is prepped.

The exceptionally quiet motor gives it an edge over similarly priced screens. Quiet "up" and "down" operation makes the Advantage more professional in appearance as well as less distracting to your audience.

The Advantage Electrol has several options which make it a great choice for schools, lecture halls, libraries and corporate environments. Because it can be installed during the construction phase of your office, there is no pressure to buy a "finished" screen while budgets may still be on the table. The option of many remote controls also adds to its flexibility.

Ceiling Recessed    Non-Tensioned    360" Diagonal    Square (Audio-Visual) Format    1:1 Aspect Ratio    Matte White Finish    Front Projection    120V, 60Hz    With Low Voltage Controller

Designed to have the case installed during the "rough-in" stages of construction and the fabric assembly during the finish stage

Handsome finished white aluminum case provides a clean look and allows easy installation of ceiling tiles

Standard with a Decora style three position wall switch

UL Plenum Rated case

Matte White fabric up to and including 10' high will be seamless; Glass Beaded fabric up to and including 8' high will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric are available in sizes up to 8' high; High Power fabric is available in sizes up to 9'x12' and will be seamless up to 6' high

Related Questions and Answers

Q: 1. How is the zoom actuated, is there a rocker switch on the lense or is it actuated by a switch on the camera?

A: The E PZ 18-110mm f/4 G OSS Lens offers a zoom lever switch on the lens body itself and can also be used on Sony E mount cameras that offer a zoom rocker such as the Sony PXW-FS7 and Sony PXW-FS5.

Q: 2. How is distortion from this lens, the same as the cheap 18-105 lens from sony?

A: We are certain the performance of this lens will comply with the high standards implicit in pro video production.

Q: 3. Is there any adapter that will allow this lens to work on a Canon c300 EF mount?

A: I'm sorry to say there is not. There is no adapter that allows you to put Sony E-Mount lenses on cameras with a Canon EF Mount.

Q: 4. What is the zoom ring gear size? Thanks!

A: Sorry, but there is no zoom or aperture gears on this lens. What looks like zoom or aperture rings are just rubber grips. Only the focus has a cinema type 0.8 gear ring.

Q: 5. What is the full frame equivalent of a 18-110mm?

A: 27-165MM.

Q: 6. Does the focus ring have hard stops or does it just spin continuously ?

A: According to Sony the lens is focus by wire, so there cannot be traditional markings. The lens however is parfocal and will maintain focus while you zoom in/out while in AF or MR.

Q: 7. Can I use this lens with Canon C500 PL? Any recommend adapter?

A: Unfortunately no, you cannot. The C500 PL is designed to take lenses that are designed to work on cameras with reflex mirrors. Thus the lens is further away from the sensor whether there is a mirror present or not. On the other hand, Sony E mount lenses and cameras have no mirrors thus they can take advantage of that fact and mount the lens close to the sensor saving weight, design compromises and cost. (You can use, with an adapter, PL lenses on Sony E mount cameras.) Now if by some manner you were to attach a Sony E Mount lens to the C500 PL, the image could only be focused somewhere in front of the sensor. This of course means the image would be out of focus as far as the sensor and you are concerned.

Q: 8. Do you have an alternate lens hood for this lens - that either clips on or can screw into the 95mm thread?

A: This is the Hood Sony E PZ 18-110mm f/4 G OSS hood lens. Sony ALC-SH148 Lens Hood BH #SOALCSH148. We have hood options like the following models that could work with the 95mm threads Link - https://bhpho.to/3SGhfoP . Also you could consider a 15mm Rod based Matte box solution. Matte box Link - https://bhpho.to/3y2HoGF

Q: 9. Will the 18-110 lens work with the automatic features (AF, auto iris) of the Sony FS5?

A: Yes, you can auto iris and auto focus with the FS5 and the E PZ 18-110mm f/4 G OSS Lens.

Q: 10. We are exploring the idea of purchasing the new SONY FX9 Camera. Is this Lens compatible?

A: Hi, David! It will work in Super 35mm mode but will not cover the entire sensor in Full Frame Mode. The Sony FE PZ 28-135mm f/4 G OSS Lens will cover the full frame sensor. https://www.bhphotovideo.com/c/product/1082051-REG/sony_selp28135g_e_pz_28_135mm_f_4.html Regards, Erin