The SWIT S-2041F LED On-Camera Light uses chip-array LED technology to provide a soft, bright light with minimal glare. This 5000K light is switchable to 3200K or 5600K by using the attached, hinged orange or blue filters. A front-mounted dial enables dimming from 10-100%. The light comes with the S-7004F interchangeable battery plate, making it compatible with Sony NP-F970/770 and SWIT S-8972, S-8970, S-8770 batteries. It can also be powered using the included D-tap to 5.5mm cable.

This LED light offers a 60° wide beam angle, an illumination of 1200 lux at 3.3', and a CRI rating of 85. Its output is equivalent to a 100W halogen bulb at 5000K with a power consumption of 23W. The light mounts to your camera via its cold shoe plate or its 1/4"-20 threaded screw.

100W Equivalent Light Output    5000K and 5600K/3200K Switchable Output    10-100% Dimming    23W Power Draw    1/4"-20 Screw & Cold Shoe Mounts    On/Off Rocker Switch    D-Tap Cable Included    1 x Blue, 1 x Orange Hinged Filters    2 x Hinged Barndoors

LEDs remain cool while producing a soft, bright light with minimal glare

Can be powered using the S-7004F interchangeable battery plate or the D-Tap cable

Compatible with Sony NP-F970/770 and SWIT S-8972, S-8970, S-8770 batteries

5000K color temperature with 5600K and 3200K options using hinged filters

Dimmable from 10 to 100% using the built-in dial

Attaches to camera by using either 1/4"-20 screw or cold-shoe mount

Related Questions and Answers

Q: 1. Does this come with the 12v cable to connect to the bmpcc 4k or 6k?

A: The cable is not included. It is available for a separate purchase, BH #TITAT01DCPC. https://bhpho.to/2oAnr9i

Q: 2. Does the Watson Battery Adapter Plate for P, H, and V Series (B&H #BAPSOPHV) fit this adapter, since it's listed in the accessories section?Is there an adapter plate for Sony series F, V, P series batteries that's compatible with this battery adapter?

A: There are no plates available for this charger. The plates are for the Watson chargers.

Q: 3. what's the difference between grey and black titla battery plates?

A: It is a cosmetic difference.

Q: 4. What are the sizes of the females dc output this product offers for 7.4 and 12v? If i want to connect a Ninja V on the 12v... what cable should i use barrel mm dimensions should be on each end?

A: The 12V port is a 5.5/2.5mm DC and the 7.4V port is a 5.5/2.1mm DC.

Q: 5. Will this mount work for the Sony a7iii?

A: I think you're much better off just attaching a USB power bank via USB-C power connector, and bypassing the dummy battery approach (so that you can simultaneously have a native battery installed as backup).

Q: 6. Can this battery be charged with the Varizoom SC-302 Charger?

A: Yes. That is correct. The VariZoom SC-302 Sequential Battery Charger will charge the NP-1.

Q: 7. What is the function of the small thin screw under the plate (next to the large tightening screw)? Can I remove it so the plate can sit snug on to the camera cage?

A: That is a locking pin to help stabilize the plate. It is recommended that you utilize that pin for the best connection.

Q: 8. Can I charge these on my current Sony charger?

A: Yes, you can charge the SmallRig L-Series NP-F970 Camera Battery on your current Sony charger.

Q: 9. Can this battery be charged via D-Tap?

A: You can charge S-8073N via the D-tap socket by the SWIT portable single channel charger: SWIT S-3010B Portable Charger for Batteries with D-Tap Connector B&H # SWS3010B.

Q: 10. How many amps is the 12v?

A: This plate is for the Sony NP-F970 battery. That battery is 7.2VDC, not 12VDC. That battery has 6300mAh which is 6.3 amps.