You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Pelican 1170 Case With Foam (orange)

Pelican 1170 Case With Foam (orange)
  • Product Code: ga247875
  • Availability: In Stock

$194.85 $305.91

The Pelican 1170 Case with Foam (Orange) is designed to carry a portable electronic device that requires protection form shock. It is a watertight, crushproof, and dust proof ultra-high impact copolymer case with a strong and lightweight open cell core with solid wall design. The interior has 1 base layer, a Pick N Pluck foam layer and a convoluted foam lid. It has easy open double throw latches, an automatic pressure equalization valve, an o-ring seal and stainless steel hardware. The case is carried by an oversized folding handle.

This case has a 3-piece foam set interior.

Fits Handheld Portable Electronics    Watertight, Dustproof Case    Made of Ultra-High Impact Copolymer    3-piece Foam Set Interior    Automatic Pressure Equalization Valve    Easy Open Double Throw Latches    Oversized Folding Handle

Key Specs
ColorOrange
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeCubed Foam
Water ResistanceWaterproof
IP67
DimensionsExterior
11.6 x 8.3 x 3.8" / 29.5 x 21.1 x 9.7 cm
Interior
10.5 x 6 x 3.2" / 26.7 x 15.2 x 8.1 cm
Weight2.1 lb / 1 kg
Parameters
Camera CompatibilityUniversal
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeCubed Foam
Features
ATA CompliantNo
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
Maximum Buoyancy7.3 lb / 3.3 kg
Padded InteriorYes
MaterialsExterior: Polypropylene
DimensionsExterior
11.6 x 8.3 x 3.8" / 29.5 x 21.1 x 9.7 cm
Interior
10.5 x 6 x 3.2" / 26.7 x 15.2 x 8.1 cm
Weight2.1 lb / 1 kg
Packaging Info
Package Weight2.65 lb
Box Dimensions (LxWxH)12.3 x 8.7 x 4.15"

  • Watertight, crushproof, and dust proof ultra-high impact copolymer case
  • Strong and lightweight open cell core with solid wall design
  • 3-piece foam set interior
  • Easy open double throw latches
  • Automatic pressure equalization valve
  • O-ring seal
  • Stainless steel hardware

Three-piece foam set contain 1 base foam layer, 1 Pick N Pluck foam layer and 1 convoluted lid foam layer

Temperature rating -40 to +210°F (-40 to +99°C)

Oversized folding handle

IP67 (1 meter submersion for 30 minutes)

Related Questions and Answers

Q: 1. Does this fit the Zhiyun-Tech Crane-2 3-Axis Handheld Stabilizer with Follow focus?

A: We're afraid not. This case is for the smaller Crane V2, which is a different gimbal than the Crane 2. The Zhiyun-Tech GMB-FC592 Case is the proper case for the Crane-2 Stabilizer. https://www.bhphotovideo.com/c/product/1374681-REG/zhiyun_tech_gmb_fc592_case_for_crane_2.html

Q: 2. Will sony a7r2 with Batis 18 fit ?

A: The DiCAPac can accept lenses up to 3.75 inches and so the Zeiss Batis 18mm with the Sony A7R II should fit as it is well under that length.

Q: 3. Will this product fit a Nikon D3200?

A: I am not sure I had a D5200, but my advice is don't use a zoom lens but rather a prime. Because if you put it in auto and the camera will try to zoom and there is no space for the zoom to operate that could possibly cause serious camera damage.

Q: 4. Will this case fit a Nikon coolpix p500?

A: The Nikon P500 will fit in that case but the case is pretty large so the camera will move around a lot.The one listed below will have a little bit better fit.

Q: 5. Will the Nikon D5 with 50mm or 14mm fit in this bag?

A: The DiCAPac WP-S5 Waterproof Case for Small DSLR Cameras would be too small for that camera and lens combination. I recommend this larger version: https://www.bhphotovideo.com/c/product/547694-REG/

Q: 6. Will this case fit a Nikon D3300 with a Sigma 10-20mm 4-5.6? The filter size is 77mm. But when I measured the outside diameter is is 85mm.

A: I have D3000 with a Tamron 18-270mm filter is 62mm and it fits fine. Little snug getting it into the pouch but plenty of room when seated into position.

Q: 7. Will a Nikon D7000 fit in this case?

A: A D7000 would be a bit large for this case. You could try the WP-S10.

Q: 8. Will this product fit a Sony a7SII with Metabones E-EF adapter and Canon 16-35mm II F2.8?

A: This product can fit a lens up to 3.25 but the 16-35mm 2.8 II is over 4 inches. It will not fit.

Q: 9. I have a Panasonic FZ80 which does not have a removable lens. Will that fit into the mouth of the WP-S5 bag? Also, will the case accommodate the fully extended telephoto lens?

A: The FZ80 will fit in the DiCAPac WP-S5 Waterproof Case for Small DSLR Cameras. But you can not extend the zoom lens fully.

Q: 10. Will it fit my canon eos 1200D

A: Yes, it can. What may hinder your use of this bag is the size of your lens, as long as it is under 3.75 long, you will be able to use this.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Pelican 1170 Case With Foam (black)

$194.85 $233.82

Eylar Small Case With Foam (10.6", Green)

$110.97 $157.58

Nanuk 909 Hard Case With Foam (blue, 4.8l)

$154.92 $243.22

Formatt Hitech 4 X 5.65" Fog 1/8 Filter

$999.00 $1,598.40

Tiffen 49mm Soft Contrast 3 Filter

$67.50 $96.53

Hoya 82mm Sparkle 4x Filter

$230.70 $357.58

B+w Mrc 103m Nd Filter (48mm, 3-stop)

$179.85 $275.17

Products You May Like

Celestron Omni 15mm Eyepiece (1.25")

$89.85 $123.09

Clearsonic Lidpac 5-3 (dark Gray)

$1,163.97 $1,629.56

Allen & Heath Sq-5 Mixer Kit With Prox Flight Case

$12,896.97 $19,861.33

Cooke 21mm S7/i Full Frame Plus Lens T2.0 (feet)

$75,600.00 $114,912.00