The Countryman E2 Unidirectional Earset Microphone is a miniature earset microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The E2 is designed with a small boom and ear-loop for low visibility. Its unidirectional polar pattern features a uniform frequency response and minimizes off axis noise and feedback. An equalizing circuit in the audio connector custom tunes the frequency response to deliver rich highs, mid-range presence and full-bodied bass.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is black and sold without a cable.

140dB SPL for Strong Vocals    Sold without Cable

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

Its unidirectional element provides nearly the isolation of the Countryman E6 Omnidirectional microphone at the mouth, but with significantly less visibility.

This version is optimized with a sensitivity response for strong vocals with a maximum SPL level of 140dB SPL. This E2 us well suited for singers, strong presentations and more.

Related Questions and Answers

Q: 1. Is this recording full frame readout in 4k 60p or it's will be in crop mode?

A: Yes, you can get a full frame readout for 4K60.

Q: 2. What’s “data transformation” for the usb-c port for? Can you connect a usbc external ssd like Samsung T5 to record into?

A: Yes, an external SSD may be connected. To meet the recommended specs of this device, a good option this would be the Angelbird Match Pack - https://bhpho.to/2LbV2hv

Q: 3. Any B4 lens adapter or PL mount adapter?

A: The Zcam is an interchangeable mount system therefore instead of adapting the mount you would swap the mount. Here is the PL Mount for Z-Cam E2 Cameras Z CAM Interchangeable Lens Mount for E2 Flagship Series (PL Mount) B&H # ZCEM102 MFR # EM102 In regards to B4 that is a bit tricky. B4 Lenses are not designed to cover Super35mm sensors therefore it will create a vignette when used with this camera. the only way to avoid it is to crop in on the image. If you truly want to mount a B4 Lens on this camera you can use the MTF Services Ltd B4 2/3" to Canon EF Adapter B&H # MTB4CANEF MFR # MTB4CANEF

Q: 4. Is it possible to record 4.2.2 10bit format in 4k 24p on this camera?

A: No. Only the following compressions are available Raw Recording Raw 12-Bit 4096 x 2160 at 29.97 fps [300 Mb/s] Recording Modes H.265/MOV/MP4 4:2:0 10-Bit 6244 x 4168 up to 29.97p [300 Mb/s] 6144 x 3240 up to 48.00p [300 Mb/s] 6144 x 2592 up to 59.94p [300 Mb/s] 5760 x 3240 up to 48.00p [300 Mb/s] 5552 x 4164 up to 29.97p [300 Mb/s] 4992 x 4160 up to 29.97p [300 Mb/s] 4096 x 2160 up to 72p [300 Mb/s] 4096 x 1728 up to 119.88p [300 Mb/s] 3840 x 2160 up to 72p [300 Mb/s] 3840 x 1620 up to 90p [300 Mb/s] 1920 x 1080 up to 119.88p [300 Mb/s] H.264/MOV/MP4 4:2:0 8-Bit 6244 x 4168 up to 29.97p [300 Mb/s] 6144 x 3240 up to 48.00p [300 Mb/s] 6144 x 2592 up to 59.94p [300 Mb/s] 5760 x 3240 up to 48.00p [300 Mb/s] 5552 x 4164 up to 29.97p [300 Mb/s] 4992 x 4160 up to 29.97p [300 Mb/s] 4096 x 2160 up to 72p [300 Mb/s] 4096 x 1728 up to 119.88p [300 Mb/s] 3840 x 2160 up to 72p [300 Mb/s] 3840 x 1620 up to 90p [300 Mb/s] 1920 x 1080 up to 119.88p [300 Mb/s]

Q: 5. Will Ef-M lenses work with this mount? I want to use the EF-M Sirui anamorphic lenses with my old Metabones speedbooster or with this EF mount. I don't think EF-M lenses fit on my Metabones, but will they fit on this lens mount?

A: This camera package is not compatible with EF-M mount lenses.

Q: 6. will the camera shoot 24P??? 30p is horrible and this seems like a huge mistake.

A: Yes, this camera will shoot 24p.

Q: 7. will there be a m4/3 mount or is the mount removable?

A: Not that we are aware of. This product will have EF and PL mounts only.

Q: 8. What would the result be when mounting an MFT lens that doesn't fully cover the sensor, and is it possible to use those if you have to crop to 4k?

A: Some Micro four thirds lenses do cover larger sensors, even though they are made for micro four thirds, such as the Rokinon 12mm T2.2 Cine (RO1222M43), which covers APS-C. However, this is not true of all micro four thirds lenses. For such a lens that only covers MFT, you would get vignetting around the edges of the frame of a shot and would need to crop the image in post production to remove it. Internal cropping, which is available in some resolutions, would also help with avoiding vignetting issues: 4096x2160 @30fps max (4K DCI Low Noise) * 4096x2160 @75fps max (4K DCI) * 4096x1728 @100fps max (4K 2.4:1) 3840x2160 @30fps max (4K UHD Low Noise) * 3840x2160 @75fps max (4K UHD) * * supersampling / cropping selectable https://www.z-cam.com/e2-s6/

Q: 9. Does this Camera support SDI Out through a module add on?

A: That would depend on the specific type of module add on you are referring to and whether that device would have the capacity to loop through the SDI signal.

Q: 10. I would like to know if this lenses ( https://www.bhphotovideo.com/c/product/1492972-REG/sigma_213965_14_24mm_f_2_8_dg_dn.html ) fits this Z Cam E2-S6 camera ? Thank you

A: We're afraid not. That is a Sony E-Mount style lens, it will not work with this camera which has a Canon EF lens mount.