The black E2 Unidirectional Earset Microphone with 2mm Detachable Cable and TA4F Connector from Countryman is an over-the-ear earset, similar to a classic E6 earset, but with a shorter boom designed to work with the Shure wireless microphone system. It provides suitable isolation at the mouth, but with less visibility than an E6 Omni earset, and can be used to capture audio for general speaking and vocal applications.

With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are warm and natural. The element, boom, and sub-miniature connector are all easily hidden on the user's face. The boom position near the ear helps to eliminate breath pops and vocal plosives on the mic. The 2mm detachable cable terminates to a TA4F connector for direct connection to a Shure AXT100+, BLX1, FP1, GLXD1, PG1, PGX1, PGXD1, QLXD1, SLX1, UC1, ULX1, ULXD1, UR1, or UR1M bodypack transmitter.

For Shure Wireless Transmitters    20 Hz to 20 kHz Frequency Response    For General Speaking and Vocals    Fits Over the Ear    Includes Carrying Case    Black and White Cable Clips    Windscreen and Protective Cap

The E2 Earset redefines pure sound in a virtually invisible package. It offers better ease of use than a lavalier or podium microphone.

There are two aspects of the E2 design that make it possible to capture sound so far away from the mouth: strong off-axis rejection and precisely tuned frequency response. For on-axis interference, the frequency response tuning in the connector of the E2 allows you to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band.

Like the connector for the industry-standard E6, the connector for the E2 is built tougher and more water resistant than previous models.

Standard gain, for speaking and vocals.

Related Questions and Answers

Q: 1. On the Z Cam website, it says the HDMI output is 10-bit, 4:2:2. But here it's advertised as 10-bit 4:2:0. Which one is it? Thanks!

A: Yes. The following unit produces a 4:22:10bit via HDMI 2.0 Type A video output up to DCI 4K @60fps.

Q: 2. Will any MFT lenses cover this sensor area or is the manufacturer presuming you will use FF lenses (Canon, Nikon, etc.) with an appropriate MFT mount adapter?

A: There are MFT mount Cinema Lenses on the market that can cover Full Frame and Super 35mm sized sensors. https://bhpho.to/2m4uYvt

Q: 3. is there Nikon F-mount adapter for ZCAM?

A: While Z CAM does not manufacture an F-mount or F-mount adapter for the Z CAM E2-S6 Super 35 6K Cinema Camera (EF Mount) (B&H# ZCE2S6EF), a third party adapter could be used with lenses that do not require an electronic contact for aperture or focus control such as the Vello Nikon F-Mount G Lens to Canon EF/EF-S-Mount Camera Lens Adapter with Aperture Control (B&H# VELACEFNG): https://bhpho.to/3wHSXRQ

Q: 4. will the usb-c allow for data recording such as using the T5 as a media storage?

A: Zcam E2 S6 offers recording capability from the USB-C port.

Q: 5. Hello ! I have a series of mft lenses : Nokton f 0.95 (10.5mm) Nokton f 0.95 (17.5mm) Nokton f 0.95 (25mm) Nokton f 0.95 (42.5mm) Nokton f 0.95 (60mm) Panasonic leica f 1.2 (12mm) Panasonic leica f 1.2 (200mm) I want to know which of these mft lenses will conver this 35mm sensor if we use MFT Mount on this Z Cam E2 S6 camera ? P.S : Also if you can tell me the same thing about the NOKTON f 0.8 (29.5mm) lens Regards

A: The Nokton and Panasonic Leica Lenses are designed for MFT sensors. We do not recommend them for Super 35mm. Consider cinema lenses (such as Meike or Rokinon) if you are interested in MFT lenses that cover Super 35mm sensors.

Q: 6. I already asked a question and you have no answer. That means you don't have 10 bit 4:2:2 internal recording ?

A: This camera will have 10-Bit RAW internal recording, which is higher quality than 422 as 422 is a compression ratio.

Q: 7. Has anyone tested the Canon 18-80 Cine Servo with S6? Full focus and zoom control pass available through the ZCam app? https://www.bhphotovideo.com/c/product/1246187-REG/canon_1714c002_cn_e_18_80mm_t4_4_compact_servo.html

A: We know that the focus function will work and in our opinion, the zoom motor of the Canon CN-E 18-80mm T4.4 can be controlled via the 2.5mm control jack.

Q: 8. Will this have built in ND's?

A: Electronic ND will come as an optional accessory.

Q: 9. Will the mounts on this camera be interchangeable, so that you can buy one camera body and two mounts and simply switch between EF and PL?

A: According to the manufacturer, The E2-F6 and E2-F8 full-frame models will support user interchangeable mounts, so you can switch between Canon EF and PL mounts at will.

Q: 10. Does the ef mount take full frame lenses or APSC lenses?

A: The Z CAM E2-S6 Super 35 6K Cinema Camera (EF Mount) will accept and work with both full frame and APS-C lenses.